How to remove rust from the machine: useful tips

Probably, every car owner is not indifferent to how his iron friend looks. And with the appearance of various scratches and other defects in the paintwork, the problem of restoring the old look of the body arises. But, unfortunately, in addition to scratches, the car is also afraid of rust, which appears due to prolonged use of the car in places with high concentration of moisture. Such an attack can be subjected to machines of absolutely any brand, absolutely any production (difference only in time). But in any case, after detecting traces of corrosion on the body of your iron friend, immediate measures must be taken to eliminate them, otherwise rust will spread all over the surface of the vehicle. In this article, you will learn how to remove rust from the machine.

Why is this happening?

In fact, the reasons for the appearance of traces of corrosion are more than enough, and it can be not only driving through wet areas. The main reason for their appearance is the following: the metal is exposed to the negative effects of two elements simultaneously - water and air, after which under its paint coating there are small potholes or scratches, which harm your iron friend.

What if there was rust on the body? How to remove it? Stage of preparation

Initially, the entire process must begin with surface preparation. To do this, you need to clean the old paint, which has already become covered with potholes, using sandpaper, and, of course, the rust itself. This is done with a conventional grinder. Then the surface must be degreased with alcohol or gasoline and paste whole places of the body with paper or tape so that the colorful dust does not harm the whole paint. After that, you need to buy a can of primer and paint that fits the color of your car.

How to remove rust from the machine? Step-by-step process

After our surface has passed the process of preparation, you can safely get down to work. So, apply a thin coat of lacquer with a primer and wait a few minutes until it dries. So it is necessary to make two more times, so that the layer is finally fixed on the surface. After applying the third layer, you need to put the car in the garage for 12 hours.

How to remove rust from the machine? Paint application process

At the end of the required time, it is necessary to carefully clean the place of application of the layers with fine-grained sandpaper. Further, in order to remove the rust from the car, you need to proceed to painting works. At this stage, we will apply a layer of paint to the surface of the place where the corrosion originated. You only need to do this work in one layer, otherwise you will not be able to avoid any inconsistencies. After that, leave your vehicle for a day in the garage, then remove the adhesive tape and paper that covered the whole body parts from undesirable effects of the primer dust, and start to fully operate.

So, we figured out how to remove rust from the machine with our own hands.