How to make paper flowers. How to make a flower from a paper tape

To decorate institutions, offices, kindergartens, schools, restaurants use paper flowers. For them, bright paper ribbons, corrugated rolls or colored office paper are suitable. Although in the floristic departments you can buy a wide variety in width, color and texture of the ribbon. Let's consider in detail how to make paper flowers: roses, peonies, chrysanthemums, forget-me-nots, mallow.

Ways of making roses

Each master makes roses in his own way. For decorative purposes, when the heads of flowers are glued to the branches, heavy paper is taken. It is better to take a velvet dark red or burgundy color. Cut the paper into squares. Make a circle out of them. Now spiral from the edge cut the strip to the center. Try to keep the line level. Then, taking the middle of the fingers, start to twist the rosebud. Attach the edge of the paper and glue it to the branches.

You can make a flower from a paper tape. To do this, take a corrugated long tape 6-8 centimeters wide. The edge along the entire ribbon is bent to a centimeter outward. Now insert in one edge a wire with stamens or without them, form a core, tightly wrapping paper.

Next, around the circle, wrap the ribbon, adjusting the shape of the rose. At the last stage, glue the edge, wrap the stem with green paper, fasten the leaves. If you wrap everything with packing paper, diluting flowers with artificial branches, decorative berries, small flowers, you will get a bouquet.

Another couple of ways to make roses

Patient masters from paper squares cut out petals of different length and width according to the pattern, forming a rosebud. Corrugated paper is more pliable, but the dense material can also be bent into a petal. To do this, draw a circle on the sheet, divide it into sectors, then round off the petals. Now with scissors cut out on the sector and they also bend the petal.

That is, on the blade of the scissors, put a third of the sector, holding the paper with your fingers, pulling the petal upward. As a result, the edge is rounded. Collecting such petals in a flower, you can achieve magnificent volumes. Children can create a bend with a pencil.

How to make paper flowers from templates? Cut the ribbon into squares. Fold in several layers, the amount of tea rose will depend on their quantity . Cut the circle. Fold it in half as many times as you want to get the petals. Further round the edge. Straighten, get a flower with petals. Push the wire with the stamens into the middle of the templates. Seal with the help of sepals. One by one, straighten the templates, lifting the petals up.

Make Peonies from Squares

Lush colors require corrugated or wrapping paper. Fold it in several layers in a square. Its size determines the diameter of the future flower. Now fold the figure again into a small square. On two sides along the edges cut out in zigzags. It will be petals.

Straighten the paper to a large square. "Garmoshko" bend from one edge to the other all the paper. In this case, the zigzag determines the fold width of the accordion. If the width of the resulting strip is large, then on each side make small incisions. Tie up with tape or wire. Spread each layer up, adjusting the shape. So quickly you can make paper flowers with your own hands.

To diversify their color range, add a core. To do this, you add the accordion from the other paper, similar in width to the strip of the flower. You cut at the edges, creating a magnificent fringe of stamens. Straighten the accordion of the flower and the core, overlap each other, fold again over the folds.

We continue to create lush flowers

The resulting line is connected with edges to each other so that the core is on the other side. Attach the flower to the stem, start one by one to straighten the petals, lifting the stamens up. Depending on how the edge of the accordion is rounded, you get different shapes of asters, chrysanthemums, peonies, etc. Nested colors can also help keep the shape of the flower, creating the right volume. You can also create ball-shaped velvet.

How to make a paper ball-flower:

• Take corrugated paper in several layers (the more of them, the more magnificent the product).
• Make a square or a rectangle by the diameter of the flower.
• Fold the accordion.
• On both sides round or taper the petal.
• Bend the accordion in half, defining the middle.
• Make shallow incisions and fix with wire or tape if the balloon hangs from the ceiling.
• Carefully each layer is straightened on both sides, shape the petal. Form the layers not only upwards, but also downwards, creating a ball.

How to make paper flowers of unusual shape?

Thin paper (corrugated, creped, packing) can take any form well. Here's how to make forget-me-nots:

• Take the bead (its size determines the width and depth of the petal).
• Attach to the paper and cut the rectangles.
• In the middle of the piece, put a bead on, from both sides tighten the edges tightly.
• From one end, the tip is cut off and fixed with colorless glue. Do not touch the other edge.
• Take out the bead, form the petals with the other rectangles.
• Cut the wire for the stem with the core.
• Attach the petals to it, holding it by the long tips.
• You wind up with green paper, forming a sepal.
• Glue the leaves.

You get interesting convex flowers, combining which on one stem, you will make forget-me-nots. If you take a tennis ball, you will get large flowers. They can easily be built by older preschoolers, since making large paper flowers is not difficult. Connecting them in bouquets, you can decorate the music hall for the holiday or give to moms.

Elongated flowers

With the help of scissors and glue, you can create a variety of flowers: lupins, callas. Lupine is made from a wide paper tape. To do this, cut a long strip. From one side, bend the paper to a centimeter (for this side you will glue the flower to the stem). From the other end, cut the paper to the fold line. The width of the strips determines the width of the petal. Despite the simplicity of production, only school-age children can make paper flowers with their own hands.

Then each strip is rounded with scissors inward (if you put a piece of the fold to yourself, then the edges of the strips are twisted in the same direction). Next, make a stalk, pasting a wire or a stick with green paper. Immediately make sharp-nosed leaves. It is enough to fold the paper with an accordion, sharpen the edge and round out the petals (not much, just to give a bend).

Take the stem, around it begin to twist the resulting lambs in a spiral. The rings are looked out. The form of lupine is created. To the bottom of the stem you glue the leaves, also in a circle, straighten each petal.

How to make a large paper flower with a needle and thread?

For large flowers that are put in outdoor vases, more material is needed. From a roll of paper tape cut a long strip. Fold it in several layers. If the volume is not enough, then put on top of the same paper of a different shade. One edge, bend centimeters by three or five. Up to the fold line, cut by strips.

In order to be comfortable, use a pair of clothespins. Now, on the typewriter, stitch along the whole edge. On the stalk with stamens (the same end of the paper with the strips twists, only the ends are twisted, dipped in the glue and the painted manga) glue, winding the paper tape with the petals. Straighten the flower, glue the leaves.

Here is another master class. We will tell you how to make paper flowers in the form of a peony, a poppy or a rose.

• Wide paper tape in the middle.
• Fold the fold in half (the more layers are taken, the more luxuriant the flower).
• At the end of the stem, fasten a piece of cotton wool and pasting it with the same paper, getting a bud.
• Wrap the tape around the bud, periodically lubricating with glue and adjusting the shape.
• Finish work on the sepals, stalk and leaves.

More ways to make flowers

The above method can quickly make asters. To do this, the ribbon is cut so that the trapezoids are formed, which you decorate with small denticles or zigzags. Just pour out from the other side, form an astra.

If the ribbon is cut with "fences" two centimeters wide, then when you create a flower you will get a kind of velvet. The middle of such a flower can also be made in the form of a candle flame (wrap with cotton and pasted with the same paper).

River flowers can be obtained if the tape is cut with centimeter strips. Then through the stripes "to thin", that is, you get a strip - emptiness - a strip. The remaining petals are rounded. Stretch tape, attach to the stem. In this case, make a medium of contrasting color. This method is fast, but only for senior students. Manual stitching can lead to deformation of the paper in the hands of children.

With pre-schoolers, another way of making flowers is suitable. Also simple and original. So, how to make a paper bouquet of flowers for one lesson?

• Distribute to children square sheets of paper with templates of flowers of different sizes. For example, a flower with five petals with a diameter of 15, 10, 8 centimeters.
• Translate the templates into squares of paper and cut them out.
• At one end of the green wire, thread the bead.
• Put all the petals on the wire from the other end, starting at a smaller size.
• Glue the sepals and leaves.

Method of making flowers for the patient

Many masters individually cut petals and form bends of flowers, trying to bring them closer to the original. So, for the calla cut out a wide sheet, form a bend and wrap the stamens. In many flowers, each inflorescence is collected separately. Let's consider the given process on an example malv.

How to make paper flowers: instruction

• Draw on a thick paper a flower pattern in the form of a circle cut in a spiral. Only the lines are not even, like the roses, but undulating.
• Now, each petal with a pencil or scissors should be bent, like a lupine. In this case, the petals look "from themselves."
• Then wrap the pencil flower, glue the core.

Such heads on the panel form in the inflorescence. If you need a bouquet, then fasten them on the stem from all sides.

By the same plan (the formation of each petal), lilacs and lilies of the valley are created. Only the paper tape is cut with long strips, which penciled into the lumps. From afar creates the illusion of small details. And to emphasize the shades of the same color, twist two different ribbons on the stem.

Brief conclusions

So, how to make a big paper flower? Ways of making a lot! Children can make flowers according to patterns of different colors. Stringing layers on top of each other, you get field plants. The fastest way to create lush forms are crafts made from solid paper ribbons. The paper is formed by an accordion, the edge of the petal is cut out and pasted onto the stem. Used for any paper colors. Due to the crushing of the material with a pencil, hands, other objects, the bending of the petal forms in different ways. Try to make the flowers described in the article, and in the process of work will come new ideas.