How to make a hookah at home: the features of the process

Recently, the hookah has ceased to be exotic in our region. However, few know that it can not be purchased anywhere. Also, few people can guess how to make a hookah at home. And it's very possible. First you need to collect the necessary material and the basis of the product.

To work you will need a tube of steel with a small diameter, which will be used as a mine. Naturally, the material should be as safe as possible for human health and not cause allergic reactions. Before you make a hookah at home, you should find a scheme of the structure of this product. Next, the assembly procedure will not be difficult.

As a basis, you can take a tin can or teapot from metal (the latter is used most often, since it is more simple to process). For smoking, you can apply any thin rubber hose. And you need to find a hotplate from the gas stove. In order to connect all the details, you need to buy a soldering rod.

Since it is not difficult to make a hookah at home, you can do it perfectly. However, do not forget about certain nuances. Now proceed directly to the assembly of the device. First you need to connect the burner to the steel pipe. And the seam should be completely hermetic. The second end of the future shaft should be firmly attached to the lid of the kettle. To do this, it needs to make a hole, the diameter of which will coincide with the diameter of the tube.

Before you make a hookah at home, you should measure the length of the shaft. After that, the tube is inserted into the hole on the lid and soldered from both sides. For the seam to be neat, it is processed with a file.

The hose for smoking should be attached to the tip of the kettle. To do this, the part of the last element should be sawed off. The hose should be inserted inside the nozzle. The connection must be airtight, so it is necessary to wrap it with electrical tape. To ensure that the hose does not jump out of the nozzle, it should be firmly fixed with a nut that is put on the element and plays the role of a yoke.

If you know how to make a home-made hookah, and are confident in your abilities, still be careful and try to observe the tightness of all the seams. To do this, you can use foil. Then, a gas burner is installed on the lid, into which a small funnel should be placed. In it you can fall asleep tobacco, and it can be made from ordinary foil. On the hotplate put a strainer made of metal.

After all these actions, you can safely check the device for operation. To build such a design is real even from a normally metal can. To do this, it will be sufficient to make two holes in the cover (for the hose and tube) and do everything as described above.

As for the cost of this homemade product, it turns out very small compared to the price of the device in a specialized store. Now you know how to make a hookah with your own hands and will be able to enjoy pleasant moments of rest without problems. Good luck!