How to lubricate plastic skis correctly?

How correctly to spread plastic skis? Why do athletes resort to lubrication? This is required not only to get a good slide ahead, but also so that the skis do not slip when moving backwards.

Main types of greases

How to lubricate plastic skis? For this purpose, special substances are used, which are conventionally divided into categories of lubrication of holding and sliding. If we talk about ski slip lubricants, they are most often produced on the basis of paraffins with the addition of powdered accelerators. These lubricants are applied to the surface of the skids with cotton swabs or by spraying. After drying the grease, the skis need to be polished.

Lubricants may have a liquid or solid consistency. Their use contributes to the acquisition of the surface of the ski effect of additional adhesion, which becomes indispensable in repulsion.

The selection of the optimal lubricant for skis is quite a challenge, because it often depends on the availability of the optimum ability to maximally smooth glide. One of the best options to date can be a professional lubricant for skiing Swix. To achieve optimal performance in large sports, individual lubricants are superimposed on each other in staggered order.

Instruments

If you need lubrication skis, lovers, in contrast to professional athletes, can be limited to a fairly modest set of tools. The main device for lubricating skis is the iron. As the remaining tools you can use improvised tools that will be found in every home.

For the lubrication of skis a good iron with a smooth surface, without holes in the sole, will do. A mandatory condition is the presence of a moist sponge, which will not only remove excess lubricant, but also lower the temperature of the soleplate of the iron.

The primary treatment of the sliding surface of skis is recommended using flux paraffin, which does not contain fluorine, with a melting point of 60 to 75 degrees. At the same time, the temperature of the iron should be as low as possible. This will gradually melt the lubricant, evenly spreading it over the surface of the ski. Carry an iron on the ski with grease better wide, rear surface. Remove excess grease residue with a scraper or any other convenient tool.

The use of improvised tools and materials is ideal for amateur athletes who do not need to regularly lubricate plastic skis with a notch.

Optional Accessories

One of the most desirable accessories when you need to lubricate the skis is a cover that will keep the structure of the sliding surface. In addition, the special grease lubrication for skis is very poorly wiped off the clothes.

An important role in lubrication is the preparation of the surface. Here, fine grained sandpaper is often used , with which the sliding surface of the skis is processed before the acquisition of absolute smoothness.

Lubrication process

The procedure for lubricating the sliding surface of skis should be started by applying a so-called primer in the form of a thin layer of paraffin. Then a hard, retentive and more compliant outer layer of lubricant is applied.

How to lubricate plastic skis? The process of lubricating skis is as follows:

1. The skis are securely fixed by the sliding surface upwards on a flat horizontal plane. The iron is heated to the minimum temperature, after which a base lubricant is applied to its base so that its droplets uniformly lie on the surface of the skis.
2. The liquid, melted lubricant is neatly distributed over the surface of the skis with the same iron. If possible, try to avoid excessive overheating of the soleplate of the iron and its delay in one place in order to avoid burning the surface of the skis.
3. As soon as the lubricant of sliding for skis completely solidifies, its surpluses must be carefully removed with a scraper. Finally, the sliding surface of the skis is rubbed with a nylon brush.

Secrets of proper lubrication of skis

There are several useful tips, the use of which will allow you to effectively lubricate the skis. First of all, the lubricant must be applied at room temperature, before cleaning and drying the skis. In this case, solid lubricants should be applied to the sliding surface in several separate, pre-frozen layers.

To determine how effectively plastic skis are smeared with a notch, you need to check them by moving around the snow in a smooth, measured course. If the skis begin to slip after passing several kilometers, then it is recommended to use lubricants of higher melting temperatures.

Understand how to lubricate plastic skis properly, will allow tracking for environmental factors. Important here are the air temperature, snow structure and its humidity. Proceeding from this, at purchase of greasings it is necessary especially to get acquainted with the description and instructions to application.

Finally

Understanding how to lubricate plastic skis, and having practical skills, you need to pay attention to the need for processing the sliding surface, at least once a year, which will keep it in good shape. With frequent driving under different weather conditions, the procedure can be performed more often. Store lubricated skis in a dry place at room temperature.

In the end, do not be lazy to fix, where and how the sliding surface of skis behaves when using individual lubricants. Only a serious approach to the procedure and a thorough study of the characteristics of each brand will allow us to quickly determine the choice of a truly effective means for lubricating skis.