How to install the platbands on the door yourself

Interior doors are an important element of the interior. On how much they correspond to the rest of the decoration, the success of the entire repair depends. As one literary character said, "not the color - and lost!"

It is not necessary that the doors are expensive, sometimes the motto of the design idea is a refined and concise simplicity. The main thing is that they are in harmony with the situation and, of course, they work properly - do not rub, do not creak, open and close easily.

But now the repair is over, the doors are fixed in their boxes, adjusted, and the hinges are greased. To complete the work it remains to put all the points above the "i" and the dashes over the "t". In the role of such skirting boards and platbands on the door.

Both that, and another, at first sight - an insignificant element, but both a floor, and a door the framing demanding their beauty is required. The skirting boards are selected under the floor covering, and the platbands? Correctly, it is best to harmonize everything, especially if the floor and the doors are wooden. Then the room will be transformed, it will become more elegant, cozy, and smile to its inhabitants.

So, the platbands on the door are bought, their shade does not cause doubts about the correctness of the choice, everything is just wonderful. They are so beautiful that it's terrible to spoil them. Maybe call the master? Is there no man in the house? Or maybe he does not know how to do anything? Any normal man will be offended by such questions and take up an instrument. Moreover, it is quite simple.

Installation of clypeus interior doors can be made in four basic ways. The most common of these is with nails. Their choice should be paid attention, this is the finishing fasteners, so the hat should be small, and the length - about 4 cm. It is best to drill holes in the places where the fastening points will be, with a step of twenty centimeters, then the cracks will not be cracked, Especially if they are wooden. More often it is not necessary, but less often it is not necessary, it is important that the fit is dense.

Absolutely similar to the trim on the door with the help of self-tapping screws, only it is advisable to walk a thin drill in the places where they enter the box, and slightly drill out the outer surface to fray, this time with a drill bit with the diameter of the fastener head.

If the doors are inexpensive and lined with laminated fiberboard, then the plinths are not very massive. They can simply be glued on liquid nails, but they will only hold if the base is reliable and smooth. Applying thin strips on the underside of the platbands, you need to give a little dry glue, then for a second put on the wall and let it stand again, and after that you can already fix the platbands on the door completely.

And there are products from today's popular materials, made using modern technologies. Such platbands for doors are equipped with snaps, it is a pleasure to fasten them, which can not be said about the possible dismantling. They are usually made of either MDF or plastic, materials that are not very resistant to bending.

Now the main thing is how to make the bindings invisible. With the exception of latches, the casing lining comes to the front. To disguise it, special pencils are applied to the color of the texture or putty, which, if necessary, can be applied by closing the cracks in the corners.

And the last advice, perhaps, is superfluous. Before you cut the clypeus, it is worth trying, though not seven times, but not one, for certainty.