How to make an arch with your own hands?

Arch - one of the most effective and simple ways to revitalize the interior, decorate it. She will revive your house, make it original. The reason for this is a huge variety of forms and visual solutions. The arch can be done with your own hands. If the material is chosen correctly, then it will not be difficult at all.

The simplest and most reliable option is a drywall, it is quite easy to make an arch with your own hands. Drywall is an easy, durable and flexible material. It is easy to process, and if treated with care, it is very easy to give the required shape, including it is easy to bend. Of course, the arch can be made of brick and concrete, but this is much more complicated and requires certain skills.

In addition, it is gapsokarton provides the maximum variety of appearance. Of course, most of the time the arches are made simple round, however, the designer's fantasy is usually the limiting factor. All these qualities make this material so popular.

How to make an arch? The answer to this question depends largely on the form chosen. We'll talk about the classical arch. The first thing to do is to calculate the radius of the arch and the size of the opening. Given that the arch visually makes a smaller height of the opening, be prepared for the fact that it will have to be increased. Teach that the height of the opening must be at least 2 meters.

The next step is the installation of vertical and horizontal guides. They can be made, for example, from a metal profile. Fasten the guides with usual dowels or bolts. Step no more than 15 cm.

Now it's time to cut drywall. From the sheet, you need to cut 4 rectangular triangles. Their legs should be slightly longer than the radius of the arch. Now you need to make a template. It is made from a sheet of Whatman, it draws the necessary arched rounding. Then it is cut along the lines drawn. Then, on this pattern, cut out the roundings on all the triangles.

All four blanks are fastened on both sides of the doorway, two on either side. Mount the gypsum board with screws, place them opposite the dowels. Now it's time to ask, in fact, how to make an arch? It is at this stage that its rounding is formed. It is necessary to make incisions on the profile at a distance of 5-7 cm from each other, now the profile is bent so that the arch turns out.

This construction must be secured. They are fastened with screws between gypsum plasterboard triangles. In the place where the plasterboard with the metal profile is in contact, the metal must be turned inwards and fixed with a dowel. It remains to cut all the protruding parts of the place.

Of the remaining drywall, a strip is cut, a little more than the width of the opening, and slightly longer than the archway. Then in it you need to drill holes in 7-8 cm steps. Now you need to moisten the drywall with a damp sponge on one side. This increases the flexibility of the material, and it can be bent. After drying, it will take an arched form. It is important not to overhydrate. This strip is neatly fastened to the profile, along the curve of the arch. It takes about 12 hours to dry the structure. That's all that can be said about how to make an arch of plasterboard.

It remains to zashkyrit drywall and you can deal with the exterior finish of the arch.

How to make an arch in a blind concrete wall? It is best to cut concrete with a Bulgarian with diamond discs. After finishing the procedure, you need to sand everything. Pay attention to the need for safety. During such work a huge amount of concrete dust is formed. Therefore, you need to wear glasses, a respirator and headphones to protect the ears and mucous membranes of the nose, mouth and eyes. And also specify if you are going to make an arch in the bearing wall. Cut the arched opening must be especially careful, so that the bend turned out to be even.

Now you should understand how to make an arch with your own hands. Successful repair to you.