How to install an air conditioner yourself: useful tips

Probably everyone after the purchase of the split-system wondered: "And how to install the air conditioner - with their own hands or with the help of specialists?" It should be said that the installation of this air-conditioning system does not take much time and effort. As practice shows, this problem is solved in one day. In addition, the installation of a split-system with your own hands allows you to save money significantly. But, when installing the air conditioner, you should remember that the correctness of your actions will determine the quality and service life of the entire cooling system. Therefore, this process should be treated with special attention.

How to install an air conditioner with your own hands: choose a place for installation

Before fixing all the components, you need to determine the place where they will work. As a rule, the air conditioner consists of two blocks - the internal one (the one that is mounted on the wall into the room) and the outdoor one (which is installed on the street). As for the first part, it should be mounted exclusively on strong dowels, so that then the entire expensive apparatus does not fall down and break. It is also recommended to put this unit away from direct sunlight. As for the outer parts, they must also be fastened with strong dowels. But in addition, care must be taken to ensure that this box is located in a place that does not interfere with the maintenance. Also avoid the cases when snow falls on the outside block in winter, - better make a visor over it.

How to install an air conditioner with your own hands: drilling holes in the walls

After a successful selection of the site, it is necessary to drill holes in the wall for pipes with refrigerant and electrical wiring. Also it is necessary to take care of the drainage pipes, which will take out excess water on the street. Often, for this all you need to be ready to drill a hole 6-7 centimeters in diameter. The hole is quite large, so after installation it is necessary to take care of the thermal insulation, so that the draft did not walk around the room.
How to install the air conditioner: fixing the units

Once the holes are made, you can proceed to install the blocks themselves - external and internal. In both cases, make sure that the structure is level. Deviations of at least one degree (in the angle of inclination) are categorically unacceptable. The fact is that neglecting the angle of inclination will lead to an incorrect operation of the air conditioner. Also, avoid installing blocks near explosive objects. For fixing, use metal bolts, - no wires, scotch tape and other "snot" in the installation of blocks should not be.

How to install an air conditioner yourself: laying a pipeline

And the last stage, which completes the installation of our system, is the laying of the pipeline. For the air conditioner, it is best to use steel pipes made of oxygen-free copper, which do not show signs of welded joints. As for the drainage system, a flexible metal-plastic pipe can be installed here . It is also important to remember that it must necessarily have an inclination angle down. At this stage, the air conditioning unit is complete!