Lawn grilles for parking by their own hands: installation

Any owner of a suburban area wants his site to look modern and well-groomed. On how well the lawns around the house will be made out, the external picture of the landscape will depend. When laying lawn in recent years, the use of lawn grills is quite common. Grilles for parking with their own hands can easily be laid.

They are practical, and before acquiring such lattices, it is necessary to decide which version of the design will be most preferable.

Purpose of lawn grills

As the main goal of lawn grids is the protection of green plantations from external influences. For this reason, most often such installations are installed in parking places, as well as near pedestrian paths. The grass is preserved, since the load is distributed to the cell walls. In the end, the root system remains intact, and an excessive amount of moisture leaves through the drainage system, which is located under the lawn.

If you began to wonder whether you need on your site lawn grilles for parking (with their own hands that are easy to install), then it is worth paying attention to their positive qualities. The lawn grate does not prevent the use of lawn mowers and facilitates lawn care.

Varieties of lawn grills

A lawn grate is a module based on the most commonly used plastic or concrete. The first type is considered the most modern, and recently it has received the greatest popularity due to its attractive appearance and convenience of laying. Concrete lawn grilles appeared long ago. Among their positive qualities, it is possible to allocate insignificant cost, durability and long term of ability to live. Such structures benefit from the profile, as the shape of the modules can be varied, each owner of a suburban area can find something similar for himself.

Plastic gratings

If you have already decided to install lawn grills for parking with your own hands, then you can choose plastic structures that are considered the most modern. At the heart of this installation is a high-strength material that is capable of withstanding loads of up to 1.2 tons per square meter. The period of use of such a grating is also great and can reach 25 years. The shape of the plastic lattice can be different.

If you decide to use plastic lawn grilles for parking on your territory, you can install them yourself using special locks that secure the modules securely in one frame. In this case, you do not need to use a special technique. If the territory has geometrically irregular areas, then the plastic grid for the lawn can be laid according to the territorial features of your site. Such structures are very resistant to chemical effects of oil products and acids. Under the influence of ultraviolet such elements do not melt, in addition, they are not afraid of frosts and retain their characteristics and qualities under severe external conditions.

Laying of the grid

A lawn grate for parking by one's own hands can be laid down using the following technology. Initially, preparatory work should be carried out, which involves the layout of the territory on which the grate is installed. At this stage, you need to determine the purpose of the future lawn. This can be a common lawn or one that is supposed to be used as a sports ground, as well as for gaming or car parking. Based on the goals, you need to choose a kind of lattice. After the plot has been marked, it is necessary to remove the soil from it.

The parking grating for self parking is set to a depth that is determined by the height of the gravel cushion - it should be 5-20 cm (the final value will depend on the expected loads). If you need to equip a parking space on the grill, then you need to use this parameter to the maximum. This is due to the fact that there may be situations in which it will be necessary to park not only a car, but also special equipment, as well as a minibus. The thickness of the leveling layer should be at least 3 cm. It should be taken into account that the height of the grid is 5 cm. In general, it will be necessary to remove the soil, the thickness of which is 28 cm.

Recommendations for work

Laying a lawn grate for parking with your own hands at the next stage involves carrying out ramming the soil, as well as strengthening the boundaries of the site. The last manipulations can be made using the use of bricks and stones, and the technology of concrete pouring can be applied. At the next stage, you can proceed to install the lawn grate. Preliminary should be prepared podsypka, which consists of sand and gravel, which will need to be mixed. Sand is needed to ensure that the rubble is sufficiently densely laid down and does not move under the influence of mechanical loads. Over such preparation should be laid geotextiles, which will protect the lawn from weeds and grass. The next step is to fill the sand with a thin layer, the thickness of which is 3 cm. Geotextile is necessary not only to protect against weeds - it is used as a separating layer.

Features of the installation of gratings

Installation of the grid is carried out according to a certain scheme. In this example, the option will be considered, in which a plastic grid is used. The master should pay attention to the fact that each module has docking elements, they should be used when assembling the structure in a monolithic canvas. Before buying it is necessary to take into account that the dimensions of one module of the plastic grid are 40 x 60 cm.

The final stage

When eco-parking for a dacha is being arranged, a lawn grate (with its own hands it is easy to install) must be laid, and in its cells it is necessary to fill up the soil, which must reach the very top. It is preferable to use light soil - peat or compost is excellent for this. After filling, the area must be flooded with water, which will allow soil to settle. Now you can fall asleep lawn grass and roll out the surface. The installation of the lawn grate with its own hands is completed at this stage.

Now you know how to install a lawn grate on your site.