How to insert wooden windows in a wooden house with your own hands

Wooden doors are the ideal option for a country log house. This choice is only valid for a true connoisseur of style and quality. After all, only natural materials will allow you to enjoy a good rest. Wooden window openings perfectly fit not only to the interior interior, but also to absolutely any dacha landscape.

And most importantly, these eco-friendly designs perfectly cope with the task of retaining heat. They perfectly protect not only from noise, but also from penetration of moisture and dust into the interior. If you use high-quality materials in the manufacture of windows, you can prevent possible subsequent deformation of the frame. Such designs will please you very long.

At present, due to modern technologies, it is possible to avoid such drawbacks as high level of fire hazard and insufficient moisture resistance. That is why in this article we will consider in detail how to insert wooden windows in a wooden house, and also find out what positive qualities these designs possess.

Advantages of windows made of wood

In the country interior, natural materials look very prestigious. The tree is always associated with mysterious constructions. And besides, it's not necessary that they are expensive. Wooden windows with their own hands (the drawings must be prepared in advance) is an achievable task. If you want to give your dacha an exclusive appearance, you will have to show designer abilities.

To define the parameters of future windows, you must select:

• the size;
• Colour;
• Shape;
• Stylish accessories.

What should be the blocks?

So, before you insert wooden windows in a wooden house, you need to figure out what they should be. In such a room it is necessary to ensure an optimal microclimate. In most cases, window blocks are made from coniferous or hardwood trees. Special waterproof compounds guarantee these designs durability.

Look great oak, but they weigh a lot. In this regard, the most common material is pine, because it is not only easy to process, but also covered with virtually any composition, for example, colored oils. It should be noted that for gardeners the choice of color palette is quite diverse.

The standard window box is made of a material 5x15 cm in size. In our case, a larger product will be required, since in order to give the structure the required stiffness it is necessary to increase the cross-section.

Preparatory stage

Before you insert wooden windows in a wooden house, you need to prepare a window opening. Outwardly it must be a rectangle that is flat on all sides without large cracks, potholes, distortions and other defects. If a new window was previously installed in the room, it must be dismantled, and all surfaces of the opening should be thoroughly cleaned of construction debris, dust and dirt.

How to avoid distortions?

In order to correctly insert a wooden window into a wooden house, it is necessary to take the step of measuring the opening particularly seriously. Measurements must be made both outside and inside, and in three main places - in the middle of the opposite sides and at the edges. If the opening is very skewed and it is impossible to straighten it, you should increase the size of the window so that the maximum level of the external opening exceeds the width by 25-40 mm, and the height by 10-20 mm.

You can do this by installing an additional profile window. Such a measure will help to prevent the formation between the opening and the frame of the slots in places of severe skew. There is another way to get rid of such a defect - an increase in the overall dimensions of the window box. However, this kind of work is better to entrust to professionals who will be able to do it accurately and correctly.

Wooden windows with own hands: blueprints

Start work follows from the drawing of the future product with the partitioning and indicating the exact overall dimensions. During the design between the frame and the leaf, small gaps (approximately 1-2 mm) should be left to ensure the free movement of the leaf.

Next, you need to buy an oak or pine beam in accordance with the dimensions. It is important not to forget to add to the length of the bar approximately 10%.

A window from a tree with own hands

How to make wooden windows with your own hands:

• The window should be started from the frame. To do this, with special care, saws are sawn, while you can not tolerate an error of more than 1 mm. At the ends of the rails, the binding is cut, with the help of which the frame parts will be fastened. As a rule, metal parts are used for fastening, however they can be replaced with a silicone sealant. The distance between the fasteners should be 1 cm. The glazing beads are cut together with the frame parts.

• When assembling a whole, it is necessary to ensure that the joining of the parts is carried out strictly at right angles.

• Cutting and installing glass is the most important procedure. After all, this is a very fragile product that requires careful handling.

If there is no possibility to order this material in a glass workshop, then before you make wooden windows for a wooden house, you should use the following recommendations:

1. First you need to clean the glass.
2. A strip of oil is drawn along the line of the future section, and a cut is made without cutting off the hand from the glass.
3. Sharp edges are processed using sandpaper.
4. It is important that the dimensions of the glass correspond to reality, otherwise they will not enter the frame or will be completely hanging in it.

• After installing the frame, it is necessary to insert the glass. Before this, with the help of a sealant, internal grooves are processed, and only after that glass is installed. It is fixed with glazing beads by means of screws or screws, it is necessary to start from the middle, gradually moving to the edges. To ensure a dense placement in the frame of the glass, you can lay the seal. It will reduce the number of lumens, which will reduce the flow of cold air.

• Similarly, the doors are made, and then the handles, hinges, and the structure are placed in the frame.

• The finished wooden window is preferably warmed, painted and only then installed in the window opening.

Products and materials for installing windows

Before you insert wooden windows in a wooden house, you will need the following:

• Special ruffs;
• a hammer;
• Nails;
• Window block;
• Window fittings;
• Heater;
• Wedges.

Purchase of window blocks

Buying window blocks from a tree, first of all it is necessary to pay attention to conformity to GOST of quality of wood. It should not be burrs, roughness, it should be soft. It is also important to remember that the core should not be used for the manufacture of window products. In other words, wood is selected for windows without a pattern of annual concentric rings.

Equipment

The structure of the window block includes the following elements: a box, a vent, wings (transoms), a drain design and a window board. There are two main ways to open the transom: outside - "without surfacing" and inward - "with the float". Also the window includes fittings, glass, gaskets and much more. There are single, double and triple glazing.

Installing windows

How to insert wooden windows in a wooden house with your own hands:

• On the box, window blocks are hung by means of plate loops of various designs. There are integral and detachable loops. In some, the hinge pin is not removed, in others it is removed. The latter option is convenient in those places where there is no possibility of raising the sash of the windows.
• Locked design with a special device or a bolt. Once you make sure that nothing prevents the opening and closing of the wings, you need to secure the box in the apertures with the help of nails.
• Thanks to the evenness of the loop plates, it is ensured that the window flaps are evenly hung. The plates are fixed with screws that are flush with the surface.
• The empty space between the box and the wall, which has not been so long ago stuck to the pakley, is filled with construction foam. This procedure requires the mandatory installation of struts, which after the final hardening of the foam can be removed.

Installation of ebbs and windowsills

Correct installation of wooden windows in a wooden house implies the installation of structures such as low tide. They should be fastened from the outside of the opening - the entire width of the box's penetration into the wall.

Window sills should be installed from the inside in such a way that the ends are sealed on each side in the walls by about 4-5 cm. First, fix the window board with wedges, and after laying the heater - fix the structure permanently. The opening must be leveled in advance at the bottom. For this, a calc-gypsum solution is used.

Installation of platbands

To the window opening looked beautiful, the gap between the skin of the wall and the box is hidden under the clypeus. Similarly, the upper and lateral sides of the window frame. In one house, window structures should be framed with a casing with the same profile and one standard. Horizontality and verticality are verified by means of levels and plumb bows, and directly to the box they are nailed, the distance between which must be 10-12 cm.

Now you know how the installation of wooden windows in a wooden house looks like with your own hands. The photo for review is presented below.

Thermal insulation

To prevent the appearance of drafts, it is enough to lay a layer of foam between the panes. Thermal insulation of wooden structures will make it possible to make your house warm in the cold weather. If you decide to insert a wooden window in a wooden house, you should think about the insulation.

Let's consider the simplest methods of thermal insulation:

• The cheapest option is warming with paper. It is jammed with slots, and strips of paper are pasted on top of it. However, this method has a fairly difficult dismantling. Together with the strips, the paint layer is peeled off.
• Another option is to fill cotton wool in the cracks. This material can be replaced with textile material, foam rubber or paraffin. Above, the slits are sealed with strips of fabric, previously soaked in soapy water. This procedure is repeated every year.

Decoration of wooden structures

As it was already written, there are gaps between the wall and the windows after installation, which are closed by the platbands. So, this product will help to truly decorate your home. If you decide to independently insert a window into a wooden house, think about the carved platbands. It should be noted that these structures will help protect the room from the effects of such adverse factors as wind, rain and much more.

Platbands are made of wood, so it should be remembered that not all breeds are suitable for such products. In this case, the material is subject to certain requirements. First of all, it must be stable.

The least affected are larch. However, it is not worth choosing such wood for carving, as this breed is very fragile. For carvings, the most suitable material is a lime tree, as it easily withstands even extreme conditions. But the strength of the leading position is oak. No tree can compare with it.

The platbands made of wood are made using electric jigsaw and drills. You may also need a tape measure and a pencil. Similarly, you can make wooden shutters on the windows with your own hands. If you took the risk of engaging in carving, you will also need a piece of paper to which you can apply the desired pattern. Then the picture is fixed on the prepared product and a sawing is carried out.