How to fix headphones?

If you are worried about how to fix headphones, then you should know that with certain skills and skillful hands, everything will turn out. The most common breakdown in headphones is the breaking or rubbing of the cable near the plug. In the following, we will describe several techniques that will effectively solve the problem that has arisen. Such a breakdown is due to the fact that this site is subject to continuous loads, which is why it wears out most. However, the plug is not the most expensive component in headphones, so do not rush headphones out because of such a breakdown.

How to fix headphones: options

It is a pity, but now there are not present in the sale of the plug with a wire, which you can replace the old, but from this situation there is a very simple way out. The plug can be used from the cheapest headphones, whose cost does not exceed three dollars. Usually they are difficult to use for their intended purpose, as the quality of their sound is simply terrible. And for spare parts they are great. It's also worth mentioning that the plug with a wire for these headphones is not of high quality, so it is not yet known how much they will serve you.

If you do not want to do repairs too much every month, then you should contact the radio parts store. In such places, plugs are usually sold. There you can also help with the question of how to fix the headphones. To connect your wire to a new plug, you may need a soldering iron, as well as the ability to use it. The plugs can be straight, with angled wire connection, as well as original non-assembled ones. In addition, they may differ in price, so do not save. It is important to note that internal audio connectors are also subject to replacement, but this process is much more complicated and expensive.

How to fix headphones whose wire is broken?

This kind of breakdown is the most common. First of all, when repairing, you must bare the wire. This can easily be done with a conventional knife. You need to remove the insulation layer at the point where the wire tore. Now you must connect the two parts of the cable. This can be done with a conventional heat shrink tubing. With its help, you can pull off parts of the wire, after which a contact appeared between them. Now that the wire is connected, you must protect it again, because now there is no protective layer on it. This can be done with the help of an insulating tape, which needs to be rolled up the joint place. This method is the most simple and affordable. After you have done everything described above, your headphones should again earn.

How to fix headphones with a broken plug?

With such a breakdown, we face a small problem. Here you need to replace the plug, that is, the purchase of a new one. The connection can be made in the same way as the wires. Only at the connection point it is desirable to fuse the wire with the plug, which will allow it not to fall off in the future. When the wire and the plug are heated, they must be rewound with electrical tape for greater reliability.

It happens that something else breaks. For example, if you are wondering how to fix headphones with a microphone, then it is important to say that this is nothing complicated. In this case, the whole process is similar to the above, only it is necessary to connect more wiring. If you encounter a breakdown of a different kind, that is, your headphones have fallen off something, you need to glue it with superglue, squeeze well, after which they can be used further.

You can draw logical conclusions from all that has been described, that there are no difficulties in fixing the headphones. However, if you are not confident in your abilities, you can always seek help from the masters who guarantee the quality of repairs.