How to change a fur coat with your own hands: patterns. To change an old fur coat: some ideas

Updating the wardrobe before each season is a responsible event for any modern woman. Only now it is not always possible to buy new things. As a rule, you need to have certain financial opportunities for all this. Especially "fly in a lot of money" buying winter things. You can find an alternative and change the fur coat yourself. Moreover, she probably hangs in the closet for quite some time.

Preparatory work

Firstly, to change the old fur coat with your own hands, you must first determine its future shape. Secondly, you need to check the fur for damage. He could have been eaten by a mole. Such areas will have to be cut or replaced with new fur.

To change the fur coat yourself, the patterns can be made independently, based on their size and the parameters of the finished coat. And you can copy them from any printed fashion edition.

Previously, you need to estimate the yardage of a normal fur, so that it is enough for the model you like.

How to choose a model?

Modern women are able to immediately decide on the choice of style to change the fur coat with their own hands. This takes into account:

• Desired length;
• Parameters of the old fur coat;
• The size of the woman.

To high representatives of a fine half with standard sizes it is possible to put on any fur coats. But women with non-standard figures are recommended elongated models.

Many full women love fur ponchos. If they are made of smooth fur, they can be worn. And if they are too fluffy, it is better to abandon such models.

What can I use in the fur coat?

Before you change your fur coat yourself, you need to bring some highlights to the model. Quite often the style is complemented by:

• Natural leather;
• Suede;
• Other fur;
• Kozhzamom.

All this is taken into account in the development of the model.

What can you do with the old coat?

There are several options for updating such clothes:

• Shorten;
• Lengthen;
• To sew;
• Completely change the style.

In such ways, it is quite easy to change a fur coat by one's own hands. Everything depends on the fur and its quality, as working with natural material in some cases should be done carefully.

Overlapping a mink fur coat

How to start work to change the mink coat yourself? Initially, you need to try it on. At this stage, what is not satisfied with the model is evaluated. As a rule, such coats have classical free silhouettes. Can not arrange:

• Shoulder width;
• length of the product;
• Its dimensions.

Once a flaw is found, you can begin to break the seams in the place that will be altered. It is worth considering that there is another lining that can be sewn or be free.

It is very important to consider when planning a model of a mink fur coat that it should be free, as it is a type of outerwear.

Also attention is drawn to the fact that the mink coat consists of pieces of different sizes. If you start to work incorrectly, then the product will completely dissolve.

If you want to sew the product, the extra pieces of fur are cut from the fur coat, and it must be sewn again. If large shoulders are removed, the work may take a little longer. So, the shoulder seams are initially broken, and if there is a high gate in the model, it also disappears. The sleeves, the back and front parts of the product are also subject to sewing.

You can sew fur only with special threads. In some cases, professionals recommend still gluing skins and stitches. Quite often pave for greater strength in the line dublerinovuyu tape.

After altering the Muton fur coat

This fur is quite practical in sock. Overcome the Muton coat with your own hands is quite simple. There will be no need for sizing and laying in the seam dublerin tape. Fur and so perfectly keeps the form.

It will also be necessary to initially determine what is not comfortable with the model. Basically, the snag will only be in the shoulders and in the model. It, as a rule, flared. In the product there is a necessary lining.

So, you have to start modeling a new fur coat taking into account the chosen style. The product is completely broken off by the side seams and shoulders. Sleeves will be subject to "restoration" in the last turn.

Preliminarily make up a pattern on special paper. To build it you need to its size, which takes into account:

• Shoulder width;
• Height of the chest;
• Breast volume;
• Waist;
• growth.

It should be noted that fur coats from any fur can not be fitted. On such a material it is impossible to make a dart. They can just mess up the style.

Especially if it's a mouton, which is lush and soft fur.

The process of creating a new Muton fur coat

Individual parts are laid out on a flat surface of the table or floor. On them, using special needles, patterns from paper are fastened. They need to be traced in shallow or simple soap.

The important point: to outline the pattern you need with a small margin. This will make it possible to sew together all the details together. As a rule, there will be enough for this 1-1.5 cm.

Then with the help of sharp scissors the details are cut out. It should be done carefully, as any kind of fur can crumble. As a result, you can get a peculiar "bald head".

Once all the details are ready, they are swept away by a simple seam. Then the product is tried on, and its shortcomings are evaluated. Perhaps it is necessary to remove something extra or to release some fur.

After you are all arranged in the model, you can proceed to join the parts on the sewing machine. For this purpose, a special needle is inserted into the equipment to process the fur. It's pretty sharp. It is necessary to scribble a zigzag so that there are no pile creases on the outside of the product in the joints.

Then the seams need to be processed, as the fur in the process of socks will constantly pour. To do this, use a special overlock or adjust a certain seam on the machine itself. Quite often, the seams are removed from the inside by a satin ribbon.

Next, proceed to the assembly of the liner. Patterns are also laid out on its individual parts, surrounded and cut out. Then they are swept and the product is tried.

It is worth considering that the lining of the fur coat should be 1-2 cm less in its parameters than the product itself.

Lining seams should also be treated with an overlock or made invisible.

When sewing lining fabric, you need to pay attention to the fact that the back of its side will be facing the back of the fur, so that the product from the inside looks neat.

Once all the details, in order to change the fur coat yourself, ready, you can proceed to complete assembly of the product. The lining is sewn to the seams on the shoulders and collar. Then it is fixed at the end of the sleeves. As a rule, it does not need the lower fastening, since it should be several centimeters shorter than the product, so that it does not look out from under the floor.

Fasteners and other decorative ornaments should not be touched while the fur coat is being crossed. It is unlikely to be fixed independently. The product can only be spoiled by substandard work.

Similarly, you can solve the karakul coat with your own hands. Only working with such a fur is much easier. It is not lush and it does not crumble like that.