Finishing the front door with your own hands: ways, photos

With the statement that the front door is an important element of the room, no one will argue. And if earlier owners of apartments were more concerned only with safety, then today the aesthetic component is also not the last place.

When it is necessary to finish the front door

Long gone are the days when the top of perfection was considered to be dermatologically covered doors. Today, the construction services market offers such a variety that it will not be possible to choose something suitable. For this reason, some can rightly remark: at this stage, such a question as finishing the front door, generally should not worry the home master. I chose the right one, ordered, arrived, installed - and all the problems. It seems to be so. Nevertheless, there are different situations. Sometimes it is necessary to finish the front door, which perfectly performs its protective functions, but has already been somewhat used up during the operation. And it is not always expedient to call specialists and spend money sometimes. Especially if the owner is confident that such a procedure as finishing the front door with his own hands, he is quite capable. Sometimes it is necessary to restore the surface in those cases when it suffered from the hands (or feet) of vandal neighbors. Often put in order and the inside of the front door, especially when they want to achieve complete harmony in the interior.

In short, it does not matter why reincarnation is needed. Much more interesting is the way that there are ways to finish the front door. What we will talk about next.

General principles

Of course, it is one thing, if it is necessary to restore a modern metal structure. And another - when you need to finish the old front door. Nevertheless, in both cases, you need to remember some basic rules. So, if, say, the apartment is located on the ground floors, when choosing the material for restoration, you need to take into account that it will be constantly subjected to temperature changes. Of no small importance is its strength and reliability. This factor should be borne in mind in any situation, no matter on which floor you live. And, of course, the desire to make a "business card" of your apartment as attractive as possible is only welcomed, nevertheless, it is strongly recommended to count your own forces correctly. After all, not all the finishes can be performed qualitatively, without having special skills at the same time. Therefore, talking about how to make the decoration of the entrance door, we will not be particularly wise, but we will describe the variants most accessible to each home master.

Painting

Someone, of course, can grumble discontentedly when he hears an offer to renew the door in this way, nevertheless he has the full right to exist. Especially if the "native" cover was just this, it just lost its former attractiveness over time. Moreover, today there is such a variety of quality paints, that sometimes this method can be the best option, and the result of the restoration will surprise even the most inveterate opponent of such a method. As for technology, everything here is quite simple. It is necessary to carefully remove the worn out old covering (in those places where it is peeling, cracked), using either sandpaper, or, even better, a grinder. Then prime the surface of the door leaf, seal with special putty flaws and cracks, and then paint. Or paint, or varnish. It all depends on what was the original cover.

Finishing lining

Another rather old-fashioned, from today's point of view, nevertheless has the right to exist a solution. Finishing the front door with a lining has many advantages. Firstly, it is a natural material, which for many can play a decisive role in the selection procedure. In addition, the lining is made from a variety of wood, so that you can choose the right option for yourself - both in terms of value and in terms of external qualities - there will be no labor.

Well, as for the procedure of finishing. Reiki lining is especially good in that they can be placed not only strictly vertically or horizontally, but also at the right angle, diagonally, in general, as conceived by the home designer. The technology of finishing is extremely simple. First, the frame is fastened to the door leaf from the laths (for which the banal screws are used), and then the lining itself is directly mounted on it. By the way, this option is also suitable in case if the entrance metal doors are finished with their own hands. Only self-tapping screws should be taken not for wood, but for metal. And between the old surface and a new one you can lay a heater that will only improve the heat and sound insulation.

Laminate

Sometimes, when you need to finish the entrance doors, the laminate fits best. And quite vainly many people consider this material to be a purely floor covering. Today, it is equally successfully used for facing walls and even the ceiling. So the front door is no exception. Correctly selected material will not be "afraid" of either ultraviolet radiation or temperature changes. It is strong enough and reliable. So in some cases, it is suitable even for the restoration of a door in a private house, and not just in an apartment.

Technology

Before proceeding with the finishing process, the door must be removed from the hinges and laid on a flat surface. It can be either sex, or - which is better - a table. Then you need to get rid of veils, pens and locks. After that, a kind of shield is mounted on the floor of the laminate. The procedure, by and large, is the same as the creation of a floor covering. Differences are not special. The main thing is to carefully adjust the locks in the laminate so that there are no gaps. Then the excess is trimmed, and the structure itself is attached directly to the door leaf. Usually liquid nails are used as glue . How long will it take to dry the bonding layer, depends on the initial qualities of the material. Typically, the manufacturer indicates the packaging exposure time. Then the edges of the door leaf along the contour are glued in advance with the acquired edge rails, the fittings are inserted, the canvas returns to the doorway. As you can see, everything is quite simple. And not only in words.

Veneering

It is also quite a good option, however, it is possible to carry out the procedure only if the door leaf undergoing restoration has a smooth surface. Veneer is sold in the form of long ribbons, which are glued inside with protective paper tape. As for the colors and textures, there is a choice, so that the right choice of labor will not be.

Now about the procedure itself. The door leaf is removed from the hinges, laid on a flat surface, cleaned, then treated with any degreasing compound. Using the level, in the middle, draw a straight line. Glue veneers begin directly from her - to the right and to the left. Protective paper along the entire length is not removed, but removed gradually, as far as gluing. The glued area is pressed (always through a clean cloth) with a hot iron. Surplus veneer on the sides are cut off. To make it easier to work, you can first arrange the veneer ribbons on the entire surface of the door leaf, picking them up in texture, then numbering and only then proceed directly to the gluing procedure. By the way, before the work is done, you need to get rid of all the hardware.

And what's inside?

We have described above what kinds and methods exist for this type of work, such as finishing the front door. In the apartment, however, as is known, there is not only an entrance door. There are interroom. And it is desirable that their appearance and design coincide with those of the inner surface of the entrance door. This is sometimes difficult to achieve. And if the outer surface is more or less clear, then what to do with the inside. Of course, I would like to achieve complete harmony. In principle, in most cases it works out. As a rule, interior doors in our apartments are mostly made from or under a tree. Therefore, the inside surface of the entrance door can be "adjusted" to the design, using the same color and texture laminate or veneer. Sometimes MDF panels can help out. Use them outside is not recommended, because they do not tolerate temperature changes, and they will not add beauty to a couple of kicks either, but they look like the best for interior decoration.

If nothing suitable can not be found, we can offer you a universal option. Make the door surface mirrored. This will not only enable her to "find" a common language with the rest of the interior, but also will visually expand the space of the hallway. That is especially important in those cases when these premises can not boast of a large area. And, you see, a big mirror, in which you can admire yourself at full height, will not be superfluous.

Conclusion

We tried to tell you as much detail as possible how to restore the door leaf. Photo finishing the front door to the apartment, available in this article, will help you better understand how to make it more modern and attractive this is an indispensable and very important attribute of any home. In addition, who said that these are all available options. Not at all. After all, there is still your imagination and skillful hands that will help to come up with and implement not just one version of the finish.