Door for furnaces: choose the optimal design

It seems that the design of the furnace is simple. In fact, any of them consists of several elements, each of which plays its role. That is, everything in the furnace is important - from the quality of the materials (mortar, brick, oven fittings) to its location in the room. And perhaps the most important from the point of view of operational safety are the doors for furnaces. What are they like?

Forms are different, one goal

The stove doors today are presented in a wide variety: these are the classic variants in the form of cast iron, and artistic casting, and stylish designs decorated with fireproof glass, and so on. But no matter what doors for the furnaces are chosen, it is important to remember that this element undergoes the most heating. Therefore, it is very important to take into account this factor before installing the door into the furnace. In general, the door is fastened in accordance with the general principles:

• A thermal gap should be left between the shell and the brick - it is filled with a soft material that differs incombustibility, for example, basalt wool or asbestos;
• The type of fastening of the oven door depends on the design of the product, while it is important that the brick overlap is held by itself, and not connected with the door frame.

From what materials?

The choice of material is a very responsible process, since the competent and safe operation of the entire furnace depends on its quality and reliability. As a rule, today you can buy doors for furnaces made from stove, metal or heat-resistant glass. If the oven is in a room where there are small children, you should install a special heat shield on the oven door, which will protect the surface from heating.

If you want to constantly see the burning of fire, then it is better to choose cast iron doors for ovens with glass - this solution will allow you to create an atmosphere of warmth and coziness in the house.

Modern leaders in the production of furnaces and accessories to them are companies from Germany and Austria. Choosing a design for your home, pay attention to various trifles. For example, products with double oven doors are safer, since the internal doors have a grate: it prevents coal and sparks from falling to the floor. The external door of this design has an opening - it regulates the flow of air needed to burn the fuel. This design is good where wood is used as fuel.

If the furnace is coal or mixed fuel is used, the width of the opening on the door can be adjusted to keep the air flow required for combustion under control.

Doors for stove: price

The cost of fittings for furnaces and fireplaces depends on the materials they are made of, and on what part of the oven the doors are bought for. For example, the cleaning or blowing door is quite inexpensive - 300-500 rubles. Cast-iron doors with imitation under glass will cost about 1500 rubles, and more aesthetic doors with maximum sealing will cost 3,000 rubles per item and more. The main thing in choosing - the most correct way to make calculations, so that the door would fit under the opening.