Crown for tile. Drilling holes in tiles

Quite often, the owners of a house or apartment face the need to drill a hole in the tile. If it has a small diameter, the work is made easier. But sometimes it is necessary to make a hole for mounting an outlet or even a pipe. In this case, special equipment is used. The nozzle for the drill, which allows performing such work, is referred to as the crown on the tile.

This tool is produced in different variations. Therefore, before you start, you need to know the features of the crowns. Also, the procedure for drilling holes with the help of the nozzle is worthy of attention. With the right approach to the matter, repairs will be quick and easy.

Varieties of crowns

Drilling holes in the tile is a responsible occupation. If you do not follow the instructions, you can spoil the expensive cover. Therefore, the choice of equipment and performance of work are very responsibly.

Crown of any kind is used together with an electric drill. The equipment must have the ability to work at low speed and do not use the impact function.

The existing nozzles for drilling large diameter holes can be divided into diamond, carbide, copper and metal. They differ in their value, as well as in durability. Any crown on the tile is selected in accordance with the type of ceramic tiles.

Application of crowns

The listed varieties are designed for different types of material. Metal crowns are not suitable for tiles. They drill holes in the wood. If it is necessary to make a hole in a red clay tile, carbide or diamond crowns are suitable . These varieties will fulfill the duties assigned to them with dignity.

Diamond crown on the tile is characterized by high strength. It does not leave chips and cracks even on the tile covered with decorative glaze. This nozzle manages even with the elements of the reinforcement, which can accidentally get caught in the wall during work.

If you want to drill holes in ceramic granite or natural stone, apply either diamond or KS nozzles.

Hole size

In the arsenal of a professional master, there is usually a whole set of tool attachments presented. However, an unprofessional repairman usually does not have the opportunity to buy up all the products of the presented variety. The cost of quality crowns for tiles is quite high. If there is no opportunity to purchase a set of crowns, it will suffice to pick up one nozzle. It will correspond to the diameter of the pipe, sockets or other equipment.

Crowns are available for sale, the size of which increases from 19 to 120 mm. This allows you to meet almost any economic needs in the process of drilling holes in the tile.

The crown on the tile of 30 mm is in great demand. It is most often used for plumbing fixtures. But for the installation of the podrozetnik often choose nozzles from 68 to 75 mm. It depends on the diameter of the box.

Recommendations of experts

Choosing one nozzle or a whole set of crowns for tile, you need to pay attention to a number of expert recommendations. This will avoid failure in the work.

If the master does not have sufficient experience, and the tiles are covered with glaze, do not buy cheap, simple nozzles. Tungsten coating allows drilling holes in the tile, but this is good only for professionals. Therefore, it is better to give preference to the products of famous brands that are in the mid-price segment.

Cheap, substandard products quickly fail. Sometimes you can not even finish the first drill. Therefore, in order to avoid unpleasant situations, it is better not to save on the quality of this product.

Preparatory work

Correctly selected crown for a tile at half ensures a good result. But quite a lot depends on the technique of doing the work. Therefore before its beginning it is necessary to familiarize with technology of performance of all actions and recommendations of professional masters.

Before you start, you need to prepare the necessary tool. First of all, it is necessary to evaluate the technical capabilities of the electric drill. It should not drill with impacts. Next, the required nozzle is selected.

After these manipulations it is necessary to take a level, a marker and a paint tape. Suitable is even an electrical tape or sticking plaster. It is also necessary to think about the right protection, wear special glasses. Safety rules are fulfilled unconditionally!

Drilling process

When the holes are drilled, the cutting edge of the crown cuts out the desired shape from the material thickness. In the process, the tile and the working surface of the material are heated. If the work is not done correctly, the tile may burst. Therefore, the work is necessarily done at low speed. This prevents significant overheating of the materials.

When drilling a hole, the master presses the tool a little. This should not be done very much. It is also necessary to press the electric drill evenly. The harder the material being processed, the stronger the crown.

Sequencing

Correctly selected crown for tiles helps to make a hole both on the glued to the base of the tile, and not yet mounted cover. But the second option is preferable.

Some masters advise to soak the clay tiles before starting work in the water. In their opinion, so the probability of cracking will be less.

After the nozzle is put on the electric drill, you can start working. The marking is done on the wall using the level and the marker. The tiles must be placed on a flat surface. The place of drilling is pasted with adhesive tape. After that, cut the hole in the material with a drill. This is done with a slight pressure. The drill is stopped when the entire thickness of the material is traversed by the crown.

Applying a Template

If the tile is already mounted on the base, the work will be more difficult. A diamond crown over tile in this case will be preferable, regardless of the material. Its hardness will allow cutting even the reinforcement, if it is hidden in the thickness of the wall.

The procedure is similar to the above sequence, but in this case it is better to use a template. It allows the tool to stay always at the right place and not slide on the surface. The template should have the required hole diameter.

Then, using the diamond crown, the desired shape is cut out. Work is carried out very carefully. Otherwise, you can damage the entire masonry. Therefore, the pressure is carried out neatly and evenly. To avoid overheating, the nozzle is periodically cooled, dipping it into the water. Even a beginner can apply this technology. The main thing is to follow all the recommendations of professional installers.

Having familiarized with such tool, as a crown on a tile, it is possible to choose independently the optimum version. Repair will be done quickly and easily. The quality of the holes with a competent approach to the matter can be good even for an unprofessional master.