Bentonite bragging treatment: effective methods and technology

In the process of brewing, it is very important to properly prepare a brag. It depends on it the quality of the final product and its output. Given this, some moonshakers resort to a technique that suggests that the bentonite will be purified by bragging. As a result, a lot of problems that can arise during distillation are eliminated. Therefore, it is worth considering this technology in more detail.

What is bentonite?

First of all, it is necessary to understand what is bentonite and what is the principle of its effect on solutions like berg. For many, this substance is a common clay, which is sold in dry form. In fact, it is a separate mineral extracted from sedimentary rock. It reacts with water, swelling and increasing in volume.

However, purification with bentonite braga is carried out for a concentrated accumulation of dry particles in the form of a yeast residue. In fact, this mineral is an absorbent that absorbs them and precipitates.

The name of this mineral was in honor of the city of Benton (USA), where its deposit is located. Therefore, ordinary clay for such work is not suitable.

Why make such a cleaning

• Typically, cleaning bentonite brags is performed in order to reduce the accumulation of insoluble particles in the liquid. The fact is that during distillation they often precipitate and begin to burn. This strongly affects the taste of the final product and serves as a source of harmful and harmful impurities in the moonshine.
• When using this process in brewing, you can almost completely get rid of the nasty smell of braga. For many manufacturers, this is very important, since the preparation of a drink does not interfere with others.
• The finished product is superior in quality to moonshine, obtained from raw berg. However, its amount may decrease slightly, which is even better in this case, since it was this percentage of liquid that was harmful or spoiled the taste.

Where to get it?

This issue is very interesting for those samovnshchikam who decided to use such a process as cleaning bragging with bentonite. Cat's filler on a natural basis gives us the answer. The fact is that it is made from such an absorbent, using the properties of the substance to absorb moisture and even smells.

However, it must be remembered that not all cat litter formulations are suitable for cleaning. Some companies producing such fillers use artificial substances that are completely inappropriate. Therefore, when purchasing such compounds, it should be ensured that they are made on the basis of bentonite.

Some companies sell this mineral for economic or industrial needs. However, it is very difficult to find such products, and the filler for cat litter is everywhere.

Preparation of the substance

• First you need to perform drying. The substance is poured onto a baking sheet, which is pre-covered with parchment. Next, the mineral is placed in the oven, where it is held for about 40 minutes at a temperature of 120 degrees.
• Then purification of bragon with bentonite suggests grinding. The substance is placed in a coffee grinder, where it is processed into dust.
• The next stage is very important, because it depends on it, whether the substance will stick together. Experts recommend taking half a liter of hot water, which is constantly stirred, forming a kind of funnel. After that, a tablespoon of the resulting powder is injected into the liquid, without interrupting the mixing work.
• It is worth noting that the purification of the bentonite by proportion of the bentonite is calculated based on the amount of the dry component. Therefore, usually take one tablespoon of powder for ten liters of braga.

When to enter

When do you enter the substance, so that the bergonite is completely cleaned with bentonite? The technology of brewing itself answers this question ambiguously. However, experts argue that this process is best run only when braga re-ferred. There are several methods for determining this state:

• Braga on a sugar basis usually wanders about two weeks. This method should not be considered ideal, but for home conditions it is quite suitable.
• When the liquid is fermented, it ceases to foam. This artisanal method does not require the presence of special equipment and is often used by moonshiners.
• During fermentation, the sugar must completely disappear from the liquid. Therefore, braga tastes like it should not be sweet. Usually it has a certain bitterness.
• There is a special device - a hydrometer. It is used by professional masters to determine the remaining amount of sugar. For work, cast two liters of liquid, which is filtered and placed in a measuring cup. The hydrometer is also lowered into it. It should show a value of 1.002, which indicates that sugar is left 1% and you can start distillation.

Cleaning process

At this stage, the bentonite is purified by bragging. The methods used are very different, but the general principle is to maintain the solution and maintain it for a certain time.

• In a container with brew, pour out the solution with bentonite, constantly stirring the contents. Recall that a tablespoon of dry mixture requires 10 liters of liquid.
• Then the container is left for 15-30 hours to precipitate. As a result, the liquid must acquire transparency and almost completely lose dry particles.
• When the cleaning comes to an end, you need to drain the brag. Some moonshakers prefer to do this through gauze, but it is best to use a special tube or hose. This reduces the likelihood that the sediment will mix with the rest of the liquid.
• At the final stage of the process, the distillation is started.

Warning

It is very important to mention that cleaning bentonite with bentonite is a fairly simple and affordable method, but using it, you need to be very careful when choosing components. It is strictly forbidden to use flavored fillers or ingredients that react with sugar. When purchasing bentonite, carefully read the instructions, which should describe the composition in detail.

Also it must be remembered that in some regions or countries making moonshine is illegal. The same can apply to the brahy itself. Therefore, before planning your actions, it is worthwhile first to familiarize yourself with the current legislation.

You should be aware that such cleaning can not guarantee that the product will be safe. Its purpose is only to rid the moonshine of the problems with burning braga. That is why for manufacturing it is necessary to use only proven recipes and strictly follow the technical processes of production of alcoholic beverages.

Recommendations of specialists

• When cleaning is performed mash bentonite, gelatin (the product also comprises adsorbents that bind yeast), it is very important to specify that its structure is not included flavors or other components that may affect the taste or odor of the final product.
• If you start the cleaning process before the broom ferments, the liquid will turn out to be less and the sugar level will decrease. It must be remembered that this procedure is performed only to remove excess impurities and it does not participate in the fermentation process. However, some amateurs try with bentonite to stop this reaction on their own, shortening the time of preparation of the drink.
• Do not empty the sludge after cleaning into the sewer. This almost immediately leads to a blockage, which will later be very difficult to eliminate.
• It should be remembered that this process takes at least 15 hours and can last for a whole day. Therefore, it must be taken into account immediately in order to understand your time frame.
• Brewing the brew from the tank is better with the use of a special hose, which allows the selection of liquids from the surface. So the sediment will not be disturbed and do not need to lift heavy containers.
• Even at cleaning it is necessary to maintain the temperature of the liquid at a level of 30 degrees. This will contribute to the final suspension of the fermentation process. However, such temperature limits are not necessary.
• Before adding bentonite to the liquid, it is worthwhile to transfer the container to a convenient place, where the bragging will be made. This will reduce the likelihood of mixing the precipitate. Real professionals plan all their actions in advance in accordance with the technology, so as not to spoil the finished product by accident.

Conclusion

Based on the above material, it can be concluded that cleaning bentonite braggish significantly affects the quality of the final product. In this case, this process is not mandatory in the brewing, and it can be circumvented. However, sometimes it is worth spending a small amount of time to get a really delicious drink without any additional impurities and odor. Especially if you take into account that the costs in this area are minimal.