Coil for the feeder: how to choose? Non-inertial fishing coils

All fishermen know that the feeder is an improved type of fishing by the bottom method, which differs from the usual Donka by more exact casting and increased rate of catching. For a comfortable and more productive fishing, a good coil for the feeder must be selected. How to choose is not an easy matter, it requires consideration of many nuances, such as:

• The size of the coil;
• Presence of a friction brake;
• Material from which the spool is made;
• Number of bearings;
• Reduction of the coil;
• Presence of a bypasser;
• value for money.

Let's talk about each criterion in detail.

The size of the coil for feeder fishing

Size - this is perhaps one of the most important criteria. It depends on it, what maximum length can be a fishing line. Most anglers are known for the classification from the manufacturer Shimano. It reflects the size of the spool in a digital equivalent. In this designation it is easy to understand - a spool with a size of 1000 can hold about 100 m of a fishing line with a diameter of 0.1 mm or 200 m 0.05 mm.

For the feeder, the coils with the designations 2500, 3000, 3500 and 4000 are most suitable. Each of them is optimal for a specific case and tackle. For example, if you go for crucian carp or roach in a calm pond, then the coil for 2500 is perfect, but if you are going to take a good carp or carp, you will have to acquire a more serious device, 4000 is what you need, such a coil well tolerates powerful Jerking of large fish. The universal size of the feeder coil is 3000.

Here you need to choose based on what rod you use, if you put a heavy coil on a light feeder, inevitable damage to the rod, and the pleasure of catching will be greatly reduced. If you put a light coil on a heavy feeder, you can be sure, it just can not stand the load and break, because you are going for a serious trophy, which you still have to fight.

Friction brake

The friction brake acts as an impact softener, it prevents the line breaking and rod damage, because it too can not withstand the load. When the fish pecked, the spurt can be strong enough, so the friction gradually lowers the line so that it does not stop. When the jerk force decreases, the reel completely stops, preventing the fish from moving into the depths.

The best coils for the feeder are distinguished by a soft friction, especially if it is not a fishing line, but a braided cord. He, by the way, also has its pros and cons, for example, a bite is clearly visible, but the dislocation of large fish is much more difficult. Among the fishermen there is a constant debate about which position of the friction brake is better - the rear or the front. Do not believe it, but this question is solved quite simply, as you are more comfortable and what you are used to, so it will be better. If you are a novice in feeder fishing and have not yet gone into the details of what is a non-inertial fishing coil, then no connoisseur will help you, you will have to learn everything by trial and error.

However, the difference between the front and rear clutch is quite significant. For example, the front is adjusted more precisely and makes the braking force stronger, and the coil becomes more compact and light. But if you use the rear, the adjustment becomes more convenient with the vyvazhivanii, and also you can quickly replace the spool.

Material of the spool

The material from which the spool is made is also an important criterion, since it depends on the correctness of laying the line or cord and the work of the coil in general. It is desirable that, complete with a coil, you have 2 replaceable spools, one metal, and the second graphite. Metal has no burrs and scratches, it is perfect for fishing with a braided cord, but graphite is great for working with a fishing line. If you are not bundled with a coil, do not ask for a replacement spool, be sure to ask if you can buy it separately.

Number of bearings

Non-inertial fishing coils are distinguished by the fact that in their design there is a mass of parts that are constantly rubbing against each other during operation. To mitigate this friction, bearings are used in the structure. The more of them, the more good the coil is, the softer it works with fishing, in addition, the life of the device depends on this quantity. Some models have in their design up to 15 pieces, but we do not need such heaped no-inertial coils. Feedback from users suggests that the coils with 5-6 bearings are already showing themselves well. However, there are also quite good representatives with one ball bearing, for example Salmo coils, they work very well and serve long enough without any problems.

Reduction

The gear ratio of the coil is also very important. Reduction is the number of revolutions of the bobbin for one turn of the spool handle, it characterizes the winding speed of the line. Conditionally, all the coils for the feeder are divided into power and speed. The most popular and common are coils with a number 1: 5, this is a kind of golden mean between the power of the coil and its speed, it is from this number that there is an approximate division into 2 categories, left to 1: 4 - power, right to 1: 6 - high-speed .

In general, coils with a number between 1: 4 - 1: 7 are considered ideal for feeder fishing. Let's consider why. For example, if you take a coil with a gear ratio of 1: 7 and use a heavy feeder (sometimes it is 150 grams), then the first at a high winding speed wears out very quickly, respectively, the service life falls.

If you talk about coils, the reduction of which is below 1: 4, then when throwing a long distance (150 meters), you will stretch it very long, hence the speed of fishing from this will not increase exactly. And what about the power, because the smaller the ratio of the gear ratio, the more powerful the coil? But, you see, long casts are not an option at all, that's why coils with a reduction of 1: 5 are universally accepted, but nobody forbids to move to one unit in one direction or another.

The presence of a bypasser

Coils with a bypasser are specially adapted for carp fishing. They work on the same principle as all non-inertial fishing coils, the only difference is in a special braking system, in fact, it is called a bytrailer. Usually, such a brake is performed in the form of a special brace, which when pressed depresses an additional brake.

A carp coil with a bypasser is very useful, and sometimes necessary when fishing. Usually the baytunner is made very soft so that you can sharply turn the fishing line towards the fish, otherwise the breakage will inevitably occur, or the rod will go behind the fish with the coil. If you like fishing in the summer for carp, carp, carp or white cupid, then you need just such a coil for the feeder. How to choose it? There are no special recommendations, but you can always take the advice of seasoned people.

Value for money

The last question, tormenting all fidermists without exception, is the price criterion. The fishing market offers different coils for the feeder, the price of which can vary significantly. High-quality coils for the feeder from well-known manufacturers cost about 6,000 rubles.

A novice fisherman does not have to immediately buy such a luxury, and not everyone can afford it, so you can first find a good model in the range of 1500 rubles. In what way is a good coil for the feeder. How to choose it in this price category? The main thing is to pay the most attention to the quality of the device in the shop, to check the correctness of the operation of all the elements. You can also compare the parameters with the more expensive products of this category.

Be assured, for the beginning of a career of the fidermist of a qualitative budget coil it will be quite enough, and in the future you will be able to decide whether it is worthwhile to move to a new, more professional level and buy something more serious, or what you have already achieved is sufficient. Excellent show themselves in the ratio of "price-quality" coil Salmo.

Additional properties that each feeder coil should possess

• Perfectly working and smooth logger. Its ideal condition is necessary to prevent twisting of the line when winding.
• Quick stopper stop, without it it is impossible to configure the top of the feeder qualitatively.
• Required coil configuration with two different spools. Most often this is problematic, since most coils are delivered to the market with one spare spool or without it at all.
• Mechanism of protection against dumping of the arch of the forest depositor. It is necessary to prevent the shooting of heavy feeders at the time of casting.
• Since feeder fishing is characterized by a fairly long fish vigilance, it is necessary to check the reliability of the coil so that it can withstand prolonged heavy loads.

Conclusions by choice

The main advantages of the feeder coil are a good smooth friction, a medium-sized spool with a spare, a reduction of 1: 5 - approximately this should be a coil for the feeder. How to choose it, you now know. The other aspects are no longer so important. If we talk about the weight of the coil, in the feeder it does not have such value, as, for example, in spinning, because casts are made here much less often.

It is even more important to pay attention to the quality of the wood depositor, because the casting distance and the smoothness of the coil's operation depend on how well the fishing line is wound up. It is also important, if your horse is fishing in the summer for carp, pay attention to the coils with bytrainer. That's all, now you know how to choose the coils for the feeder.