Clock from the tree by own hands: хэндмейд in an interior

The wall clock is a very practical part of the interior. In the kitchen, they provide the opportunity to follow the time without being distracted from cooking and not including the phone (especially when the hands during cooking can be in flour, oil or something else). Located in the room, they allow you to quickly find out the time, not getting into the pocket of your mobile phone. Lovers of eco-style can make watches from wood with their own hands.

What a good time for a wooden watch

Wood is a special material, objects from it have a number of advantages:

1. Naturalness.
2. Low prime cost (provided that the product is made by own hands, after all, processing by a craftsman is often quite expensive, especially if this is an individual order).
3. Originality. Many people like to look at interior items from natural wood, but not everyone decides to keep such things in their home.

Watches made of juniper or other medicinal wood will disinfect the air. For this, they should not be varnished. The view will be more natural if you take a good walk through the surface of the skin.

If you make a clock from a tree with your own hands, you can leave a layer of bark. This will give the product a more natural look.

How to choose a tree

The first step is to determine the look. Will it be a linden, soft enough and easy to handle, solid oak or healing juniper? You can choose what is easier to get or buy, and then cover with stain for the desired look.

After selecting the species, find the suitable material. In this case there are several possible options:

1. To buy finished saws at a sawmill, in souvenir or specialized shops, it is also possible through the Internet.
2. Make it yourself if there is a suitable stump or chump, chainsaw and the ability to use it.
3. Wait until the annual sanitary cuts of the trees are held, and ask the workers to cut off the desired piece. Or take from them a whole churbach and continue to act in accordance with paragraph 2.

How to prepare the material

Before you make watches from the tree with your own hands, you should spend time preparing for work. After the material is found, it should be left in a dry place for two weeks, so that it will dry. This is not necessary, if you slept bought in the store, but even the wood purchased on the sawmill can be moist. If the material was taken from freshly cut trees, the moisture level in it is many times higher than the permissible level. Such a blank, not previously dried, should not be taken to work.

If you neglect the drying of the tree, the finished watch may form cracks. In the worst case, the sleeper will split, and all the work done will be spoiled, it will have to start all over again.

Materials and Tools

There is nothing difficult in making watches made of wood with their own hands with the availability of quality raw materials and tools. What you need to prepare before you start:

1. The dry one slept.
2. The mechanism of the clock (you can disassemble the old ones or buy cheap ones).
3. Paint or incendiary apparatus (if the figures are not to be drawn, but to burn).
4. Scissors.
5. Insulating tape or paper tape (paint).
6. Thermo gun with hot glue.
7. Sandpaper of fine granularity or a grinding machine.
8. The hammer and chisel.

You can avoid an unpleasant situation, when in the process of working it suddenly turns out that something is missing, if you make a list of the necessary in advance and check with it.

How to make a watch from a tree with your own hands

In order not to complicate your life, sanding off or preparing the dial after setting up the mechanism, it is important to observe the correct sequence of actions:

1. Drill a hole for the arrows in the center of the saw.
2. With a chisel and a hammer, make a recess for the mechanism from the back side.
3. Treat the dial and groove with sandpaper or a grinder.
4. Install the mechanism, attach it with electrical tape and fix the box in which it is located, using a thermo gun.
5. Draw or burn out the numbers on the dial.
6. Set the arrows.
7. Install the fastener from the back side so that the watch can be hung on the wall.

Having spent not too much time and effort, you can make a clock from a tree with your own hands. A thing made by hand in a single copy is much more interesting than a mass production product.

A variety of wooden watches

A clock from a saw is one of the simplest options. By analogy with them you can do not from the transverse, but from the longitudinal plate. The product will turn out to be of an irregular shape, so it is important to select the material so that the longitudinal section is of a beautiful shape.

There are many options for making beautiful watches from wood. Wall, with their own hands, made for themselves or as a gift, they will long please their owners.

Possible options for decorating wooden clocks:

1. Cut the foundation of the desired shape from the furniture board.
2. Make non-standard designations of numbers. For example, in the form of coins or wooden balls. You can do without numbers and their designations
3. Take many thin dice or wooden rulers, fasten them so that a volumetric circle of thickness equal to the short side of the die is obtained. Get the original dial.
4. You can use as a clock face birch bark, stretched in a frame of beautiful bark cleared from the bark.

The craftsmen can make more complicated watches made of wood by their own hands.

The drawings of the mechanism can be found on the Internet on specialized resources. In order to create similar models, you need to have some experience and skills. The simpler options described above can be done by anyone who has such a desire and a little patience.