Caracas with a breaking frame. The homemade homemade craft

To date, there are a large number of people who are experimenting and trying to create their own vehicles from what they have at hand. Naturally, this is an incredibly difficult task, which by far is not all, but if you have the appropriate skills, you can afford something like that. The only question is what exactly would you like to design? After all, there are various common vehicles that people very often choose in the first place. For example, it is popular to redo a motorcycle in a tricycle. However, in this article we will talk about another type of transport, namely about carats with a breaking frame. You will find out what it is, and also get some useful tips on how to create it.

What is a carat?

Many people who hear about carats with a breaking frame for the first time are very surprised - it's hard to imagine what it is if you have never seen this type of transport. In fact, everything is not as scary as it might seem. The fact is that caracast is a vehicle that does not have a solid frame, it has the ability to bend, since it consists of two parts. This is what allows the caracat to overcome a variety of obstacles without special problems - that is why it is called an all-terrain vehicle. It can be used for entertainment, as it can overcome any obstacles, and do it extremely effectively. However, it is necessary to pay attention to the fact that this type of transport can be used to solve more serious problems, too, since it can overcome both snow and stones, and many other obstacles that are beyond the power of cars with a solid frame. Naturally, such a design you are unlikely to find in the store, so if you are interested in carats with a breaking frame, then you will have to think about making them yourself.

Basic construction

So, if you are thinking about what is needed, that carats with a breaking frame are available to you, then you must decide what your design will be, and what you will do it from. The first thing you need to do is frame, or more precisely - half-frames, as each of them will represent half of the full frame. By the way, it's worthwhile to pay attention to the fact that the breaking frame is actually called articulated, but this is the official name, which is not so easy to pronounce, that's why people call it broken - for that unusual property that it possesses. Accordingly, you will need to weld half-frames either from scratch, or on the basis of any frame that you have available. But at the same time, pay attention to the fact that in the future you do not have problems with the placement of all necessary elements, including wheels. If you make a frame with your own hands, then you will need to prepare a drawing in advance, so that you can follow everything according to it. It is also advisable to consult with other people who also understand the issue, so that they point out the shortcomings that you might miss. Remember that it is extremely difficult to make an all-terrain vehicle with your own hands, so you will have to make sure that you have something sensible.

Half-frames

If you create an all-terrain vehicle with your own hands, it is assumed that you will do everything as you want, but this is not always the best way out. Sometimes it is useful to take advantage of the workings of people who have already done something similar. For example, you do not need to reinvent the wheel at least in the matter of creating half-frames. Traditionally, the front frame carries the main functional load - there is the driver's seat, the steering wheel, and the engine compartment. Why so? In the whole car you can choose exactly where the engine will be located, what kind of drive the car will have and so on. Here, the frame is divided into two parts, and in the end it turns out that the front part will not be able to move normally if all the functional load is located behind. Accordingly, the rear hem is usually used as a supplement - it can make a place for the cargo. At the same time, in this issue, the simpler the situation, the better, so do not think up any incredible forms, shift the center of gravity, and so on. Homemade carat with a breaking frame is, first of all, a functional device. And only if it will function perfectly on its own, you can think about cosmetic and other improvements.

Rounded fist

Well, it's time to tell about one of the most important moments that has a carat - a broken frame. It occurs constantly during the movement, when your all-terrain vehicle turns from side to side, descends below or rises higher, and also meets with obstacles. Accordingly, you need to make sure that your swivel fist is as securely attached to the frames as possible, and that it is durable and functional by itself. To this end, metal plates are to be welded to the butt end of the metal - it is to them that the fist will be attached, so that they must also be as strong as possible. It does not matter whether you make a carat from a motorcycle or from a car, you will in any case have to take care of the chain of the wheel drive, as it is extremely important.

Chain drive wheels

Naturally, when it comes to homemade carat, you will need to think carefully about how you will drive the wheels of your all-terrain vehicle in motion. The most reliable way is to install a pulley on the engine, from which to start the chains and belts on the wheels. With the front problems will not be, but with the rear will have to try, since you will need to take into account the breaking frame - it can become an obstacle for you. However, it can not be said that this is the most difficult of the possible obstacles.

Transmission

Also do not forget that your vehicle will need a gearbox, which, of course, should be taken out the same way as the steering wheel. Regarding the choice of a specific checkpoint, everything depends on your taste: you can leave the box that was installed on the vehicle that you use as the basis for your caracast, or you can pick up something more relevant.

Driver's seat

Well, it's time to figure out how the driver's place will look. You need to choose the most comfortable chair, which will also be securely fastened, as you will not travel to the most convenient conditions, so it is extremely important that you feel comfortable and safe in the chair yourself. But do not forget that right under the seat is to leave a place to install the battery. The wheel should be left the same or choose the one that is more suitable for extreme off-road driving.

Cabin

Naturally, if you do not want to, then the cabin itself is not necessary - here it means everything you can find in the driver's cab, that is, the pedal unit, which you should also take from the car that best suits you. Also do not forget to decorate the dashboard, which should include everything you need, for example, the mechanism responsible for turning lights on and off, the signal button, switching the mass, and the rest of the functionality that your caracath will be supplied with.