Bracelets for hands with their own hands. Bracelet for watches by own hands

Increasingly, they began to appreciate those products that were made by themselves. But this is understandable, since people spend time creating some kind of crafts and investing in the process of everything themselves. In this review, we will consider the question of how to make hand bracelets .

Use of lightning

From the old lightning can be built a very stylish and beautiful bracelet, which will perfectly complement both casual and evening clothes. Collect all the old lightning bolts that lie in your closet or are located on some kind of unsuitable clothes. The only thing you need to buy is a special fittings for jewelry. It is sold in almost all shops for needlework and costs a penny. When everything you need is available, you can start making hand bracelets.

With your own hands, you can create products with the help of lightning. The process is as follows:

1. It is necessary to divide the zipper into three identical parts, the length of which should completely encircle the wrist with some margin.
2. Clamp the edges of the fitting with a special bite.
3. Carefully you must braid the parts of the zipper in the braid.
4. It is necessary to clamp the second edge with the same clamp.
5. 5After this, you should attach the lock to the clips - and the fashionable bracelet is ready. If there is no lock, you can use a thin tape from the atlas.

Made hand bracelets with their own hands using simple lightning can combine a variety of colors. It all depends on what shades are available. If you need a product of a particular color, which is perfect for a dress or an accessory, you can go to the store and purchase all the required elements of a certain tone.

Handbag Bracelet

To make a bracelet, you must collect a few pieces of cloth, a handle from an old bag, old rhinestones with blouses and other various ornaments, while focusing on your preferences. In general, you can take everything you do not need, what you planned to throw out. After that, you can start creating bracelets with your own hands. Schemes of this process can be diverse. But in this review, an optimal solution is given as an example.

First, you need to cut a piece of handle so long that it can wrap around your wrists. Then the resulting incision should be applied to the previously selected tissue and using a pencil to make marks. The length of the material should be equal to the length of the handle plus one centimeter from each end. The width should be more than about twice.

Sew a piece of cloth from the wrong side and turn it so that the seam is located inside. After that, we take a piece of the handle from the bag. Bend the edges of the fabric and carefully sew. In order to achieve maximum beauty, you can attach to the edges of the rings, removed again from the bag. Then we begin sewing rhinestones, beads and pearls. It is desirable that they correspond to the general color scheme. It should be noted that the pattern can be varied. In this case, everything depends on imagination.

So, all the balls and rhinestones are sewn, now you can attach the connecting elements taken from the same handle from the handbag to the rings. Very fashionable and, most importantly, a beautiful product is ready. Hand bracelets made in this way can not only be worn by oneself, but also given to friends. Joy from such a surprise will be more than you can expect.

Beautiful bracelets with your own hands

In order to build a stylish gold bracelet for a guy with their own hands, you will need a golden chain, gold beads and not very thick wire. Cut the chain into three pieces so that the larger part, folded in half, fully corresponds to the length of the outer side of the wrist. The length of the other two parts, in general, should correspond to the remaining length of the inner part of the wrist.

We connect all the ends of the greater part of the part, resulting in an entire round chain. Fold it in half, attach each end to the short part of the chain. Then cut the wire into several smaller pieces. One big piece should fit 5-6 beads, the next two in pairs - 3-4 beads, etc. Do it all until you get pieces that will fit only one bead.

Each segment in addition to the bead must also have a small reserve of free space, which is necessary to fix them directly to the bracelet. The longest piece of wire with beads is attached to the middle of our double chain. On each side are smaller segments. And so on decrease. The result is a bracelet in the form of a diamond.

When everything is ready, one of the edges of the chain will need to fasten the clasp. Having shown a little imagination, based on this method, you can make bracelets for lovers.

We make a braided bracelet with our own hands

First of all, it is necessary to decide what kind of cord will be. It is desirable that it was bright and fit under the clothes. It is necessary to tie the first type of knot, as on a hook. Creating the first two or three nodes will be a bit difficult, the rest will get better. The main thing is to make sure that the size of each nodule coincides with the previous one.

More attention should be paid to the length of the cord. You must select a very long element, because in connection with the nature of the nodes, the overall dimension is greatly reduced. It can be such a nuisance that the bracelet will be small. When the length reaches a satisfactory level, the edges of the bracelet must be provided with a special plug. A lock is attached to the plugs. After all the stages have been passed, you can wear the bracelet yourself or give it to a loved one.

Products made with their own hands, will always rejoice

A beautiful hand bracelet will always delight you not only with its originality, but also with the realization that it was obtained as a result of your own efforts. And it can spodvignut to create other, more beautiful and original products that will be able to act as an ideal gift for friends or close people. Over time, when your skills improve, you can do more complex elements. For example, a bracelet for survival with your own hands will make it much easier if you have a certain skill.

Creating a watch bracelet on your own

Most people just do not tolerate monotony. They always want to change something in their old clothes or accessories. In addition, the modern world does not have any established and strongly strengthened canons of fashion. Therefore, everyone can dress as he wants and wear what he wants.

There is nothing strange in the relevance of objects made by themselves. They both enjoyed popularity, and continue to use it. Therefore, if you want to pleasantly surprise the people around you and feel the pride of your efforts, you should make, for example, a watch bracelet. With his own hands, of course, to build it will not be so easy. However, the result will please.

What will it take to create a bracelet?

From tools and materials you will need:

1. Side cutters.
2. The clock itself.
3. Thin-nose pliers.
4. A few beads.
5. Two jewelry cables each 30 centimeters long.
6. Cups, in which beads will lie.
7. Clips, with which you can simplify the work with beads.
8. The lock, preferably metal, so that you can attach the watch with a new wrist strap.

How to make a beautiful watch bracelet?

How to make bracelets with your own hands? The master class of this process is shown below.

1. It will be necessary to put the wire on the loop of the dial. Exactly in the center it will have to be bent.
2. In order for the bend place to be not visible, it is necessary to stretch the bead cup immediately through the two ends of the wire.
3. Busins will need to be prepared so that they are enough for a bracelet equal to the girth of the wrist. Beads will need to be worn on the rope and secured by means of cups and clamping parts.
4. At the end of the wire, you need to fasten the lock ring. After this, it is necessary to stretch the ends through the clamping beads in order to tighten them.
5. Using thin-nosed pliers, the ends of the cable should be tightened. This is required to make the beads tighten against each other. After this, you will need to specify the last detail.
6. In exactly the same way, you need to make the second side of the bracelet. In the end, you only need to attach a stick for the lock, tighten the wire and clamp it.

Result

If everything was done as described above, with a competent and accurate approach, you get a chic bracelet for the clock. It should be understood that you can use a variety of beads in color and shape. You should show all your imagination, and then the product will delight not only with its beauty, but also with originality. Good luck in creating a bracelet with your own hands! And success in this laborious occupation.