Adhesive for joints of wallpaper: user manual, features, types and reviews

Unfortunately, after the completion of the repair, many owners of apartments and houses notice that the wallpaper in certain places began to depart from the surface. This problem is especially important for the joints between the canvases. Fortunately, you can solve the problem using modern tools, as one of them is the glue for the joints of wallpaper.

There are a lot of them on the market of building materials today. If you want to make the right choice, you should consider several varieties of these compositions, get acquainted with their features and consumer feedback about them. So you can understand what mixtures showed themselves during operation most well. It is important to first evaluate the front of the work to know which tube to prefer.

Reasons for discrepancy of wallpaper patterns

To know how to exclude the possibility of a discrepancy between wallpaper patterns before the start of the repair, it is necessary to familiarize yourself with the main causes of this problem. With such complexity, home masters usually encounter when the wallpaper glue does not match the thickness and material of the wallpaper used. Cloths can be too thick or heavy, this also applies to vinyl two-layer material. Quite often, the canvas diverge, if the following types of wallpaper are used during the repair:

• Fiberglass;
• Non-woven fleece;
• On a textile basis.

They require the use of highly adhesive adhesive.

Types of glues for joints

If you want to correct some errors of a wallpaper covered with wallpaper, then several types of compositions should be considered. Among others it should be noted KLEO STRONG. This mixture is a product that consists of polyvinyl acetate and acrylic dispersion, as well as water. Suitable material for all types of wallpaper. After the purchase it can be used immediately, as a result, it will be possible to obtain high-quality joints that will not be spoiled for another reason, because the glue differs in transparency.

Use the composition can not only when gluing the joints, but also when gluing the wallpaper in difficult places, as well as to restore the peeled off areas. Glue for the joints of Kleo wallpaper can be purchased for only 190 rubles for 80 g. Another kind of described products - Quelyd Raccord. Its cost is 205 rubles. For 80 g. This ready-to-use glue is suitable for vinyl and paper wallpapers, as well as for other wall coverings.

Use the mixture and can be used for gluing curbs. At 50 m of the surface you will need 0.08 kg. If you still can not choose the glue for gluing the joints of wallpaper, you can prefer the composition "Moment". It has a pasty consistency, is easy to apply, has low hygroscopicity and is well adjusted. The composition is characterized by high primary adhesion, as well as versatility. To apply glue, it is necessary to bend the edge of the wallpaper, and then apply the mixture in parallel to the joint and distribute it evenly.

The wallpaper on the next stage is well pressed, and the excess glue from the wallpaper surface must be removed with a damp rag. Do not start work if the thermometer has fallen below +10 ° C. This adhesive for joints of wallpaper is also good in that it has a high adhesive capacity, it is versatile and easy to use. After drying, it remains completely transparent. During the application, the mixture does not spread, and a convenient nozzle of the tube excludes excessive leakage of the glue.

Features of Axton glue

This adhesive for the joints of wallpaper, the price of which is 188 rubles., Is a mixture used for a strong and fast fixation of the edges of the wallpaper if they broke up after the repair. In the mixture there are special additives that exclude the spreading of the adhesive after its application. It grasps in a short period of time, which is very convenient if the material has to be glued in hard-to-reach places.

This adhesive for joints of wallpaper, reviews about which are only positive, is shipped in a tube, so it is fully ready for use. Its quantity will be enough to handle an area of 10 m ² . The composition is resistant to moisture and suitable for all kinds of wallpaper. Among its ingredients are acrylic polymers and additives.

Features of glue for joints "Methylan"

Glue "Methylan" is great for detached wallpaper. It allows you to connect to the wall, even vinyl. It is resistant to high temperatures and is effective when applying the material to window blocks made of plastic. Therefore, the composition can be used in the niches of central heating batteries. Metylan Adhesive for joints for the following materials is suitable:

• Glass walls;
• vinyl;
• Non-woven fabric;
• Paper wallpaper;
• Heavy wallpaper;
• Exclusive wallpaper;
• Structural materials.

Reviews of the glue "Metilan"

Consumers emphasize that to achieve a positive result it is necessary to use the above-described adhesive under certain conditions. For example, the ambient temperature should not be below +10 ° C. Buyers like low consumption, but the final figure will depend on the characteristics of the surface. From the instructions you can find out that for each square meter will be needed about 100-250 g of the composition.

This glue for gluing the joints of wallpaper, reviews it would be useful to read before visiting the store, characterized by open time, which, according to consumers, is limited to 10 minutes. This parameter will depend on the surface, the amount of application and the temperature. The composition is well mixed with water.

Instructions for the use of adhesives for joints: preparation of tools

If you decide to use glue to fix the defects for wallpaper joints, you must first prepare all the tools and materials. It will take a stepladder, which is especially true if the joints have dispersed at once in several places in the room. The protection of the room must not be done, because in the process of working debris and building dust is not formed.

To eliminate defects, it is necessary to prepare:

• Construction knife;
• Narrow metal spatula;
• Thin paint brush ;
• Household spray gun;
• A piece of thick cardboard.

A construction knife must have removable blades for easy work. But a metal spatula can be replaced with a ruler. Pulverizer should be added with a damp rag. Do not forget about a piece of cardboard or thin hard material. The size of such a blank should be equal to 200x300 mm. You need a building hair dryer.

The order of performance of works

If you have purchased glue for wallpaper joints, then you should also take care of the availability of other tools, as well as materials. To achieve a positive result it is important to follow the order of work. At the first stage, the damaged area is wetted with water and left until the time of soaking. This will eliminate the possibility of damage to the wallpaper in the process of work.

Using a spatula, the finish gently peels off the wall, and with a fine brush you can smudge the material from the inside with glue. This area is overlaid with cardboard, so that a piece overlaps the cloth. They need to press the wall wallpaper. To the cardboard is included the included building hair dryer, the surface is treated with a jet of hot air for 20 seconds. After the cardboard needs to be removed, to exclude its gluing, and on the surface rolled with a special roller for wallpaper. The base is wiped with a damp rag and left to dry.

Conclusion

Cloth wallpaper can disperse if you improperly prepared the surface. This problem is observed in those cases when the area of the wall was not applied a layer of finish putty. This is especially true for mineral roughing surfaces.

Sometimes this complexity arises when the surface was not polished or after the puttying it was not treated with a penetrating primer. Be that as it may, you can solve the problem yourself by using a special adhesive for joints. It is sold in tubes of small volume, so you do not have to overpay.