Which alloy wheels are better?

Today, car disks perform a more decorative function, rather than practical. Chromed, with an ornate pattern, they give cars prestige, at the same time, they bring some element of sport aggression. Which alloy wheels are better? How to choose them?

Basic views

The most common are steel stamped disks. They are cheap, reliable and durable. In the case of a strong impact, such rims do not crack, but crumple. This allows you to restore them with a special machine or sledgehammer (if the dent is insignificant). What are their drawbacks? They are heavy and boring - the technology of their stamping does not allow to fundamentally change the design. Therefore, steel models are very similar to each other. Noticeable competition for steel wheel disks is made of light alloy. They have a stylish modern appearance, a variety of species and a number of other advantages that attract buyers. However, the main advantage of a cast wheel rims is a decent gain in weight. What does this give? First of all, it significantly reduces the load on the transmission, brakes, suspension and other units of the car. In addition, with them, cooling of the braking system is more effective . This is due to the good thermal conductivity of the alloys and the technological feature that allows to produce the product with large holes without loss of rigidity. In addition, such disks have directional blades. When rotating, they drive air to the pads and brake discs. Add to this high precision in manufacturing, providing more accurate balancing, and you get really decent products. However, it is too early to answer the question about which alloy wheels are better.

Alloy wheels

They are produced by two methods: casting or forging. Forging is often referred to as hot stamping. It allows you to produce really high-quality and reliable rims. The method of casting differs from forging. Disks produced in this way are very technological. After their production, there is practically no waste left, which makes it possible to significantly reduce the cost of the product. In addition, this method of production allows a variety of experiments with the appearance.

What to choose

So which alloy wheels are better? You can not unambiguously reply. Light alloy wheels have a number of disadvantages, their surface requires good protection. Otherwise, the disk quickly deteriorates under the oxide film layer and in a short time loses its market appearance. Another significant disadvantage is that this product is fragile enough and is hardly suitable for operation in severe Russian roads. With a strong impact, the disc simply splits, which poses a serious danger to the life of the driver. To ensure the necessary strength it is necessary to increase the walls, and this immediately reduces the weight advantage.

Conclusion

So which alloy wheels are better? Of course, the best - light alloy. They are qualitative, strong enough and very beautiful. Therefore, we would have decided on them.