We make the installation, the rack ceiling at which it will look stunning

Already invented a large number of a wide variety of novelties, which have found wide application in construction. And floor coverings, and facing materials, and decorative elements - all this admires and pleases the eye. This article will talk about what you can see by raising your head. Rack ceiling, the installation of which is not so laborious, began to gain increasing popularity among fans of something original. Most masters install them during the repair of bathrooms and kitchens.

If we take into account the lath ceiling "Albes" made of aluminum, we will see a number of advantages.

1. This type of ceilings is neutral for temperature changes and humidity. Naturally, most often when choosing the place where to make the installation, the ceiling ceiling is installed in the bathrooms.
2. Taking into account the fact that this kind of ceilings still belongs to the category of suspended ceilings, with the help of it you can hide all the irregularities of the main surface.
3. Easy enough installation. The rack ceiling can be installed even on its own.
4. The material used for this ceiling is environmentally friendly.
5. Spectacular design.

As it was already said earlier about the installation, the rack ceiling is quite easy to install by yourself. The main thing is to follow the instructions and understand all the nuances. First of all, it is worth noting that the ceiling is mounted at the very end of the work. In other words, first you need to plaster the walls, finish the flooring, install windows and doors. If there are cables and wires, then they need to be fixed, so that they They did not interfere.

In order to successfully install the rack ceilings, you will need the following tools: tape measure, screwdriver, drill, level, metal scissors. Do not forget about the materials that will be needed in order to make a better installation. Rack ceilings are created with the help of hangers, panels, dowels, screws, profiles and traverses.

So, the basic nuances are considered. Proceed to the installation instructions.

1. First you need to do all the required measurements of the ceiling and install profiles. The hinged structure must be lowered approximately ten centimeters from the main surface. In the event that the guide profiles are slightly too long in size, they can be cut with scissors.
2. Profiles should be attached to the lines drawn in advance. In this case, screws and dowels are used as fasteners. It's worth knowing that you need to mount them with an approximate step of fifty millimeters.
3. After the corner of the room has been reached, the profiles must be fixed and their levelness checked with a level.
4. Then you need to make measurements in order to fix the suspensions. Distance in this case should reach about one meter.
5. With the help of a drill, it is necessary to make holes and fix the suspensions using screws and dowels. After that, it is necessary to check how exactly the installation was done.
6. It is necessary to secure the traverses. The installation distance must not exceed one meter.
7. After the traverses have been successfully secured, it is necessary to check them with a level. The whole design should be perfectly even. And only after all the checks you can proceed to install the panels.
8. After releasing the rack panels from the protective film, they must be installed. All elements will snap onto the traverses.

That's all! Fully assembled. Roof ceiling can now delight and delight guests and apartment owners.