Toilet with direct outlet: how to mount?

Comfort in the territory of a residential house or apartment will not be possible without a bathroom, where a quality toilet is installed. When choosing it, it is necessary to familiarize yourself with the principle of operation, device and design features. Among other things, it is important to determine what equipment is suitable for the plumbing system. Today, the most common toilet bowls with direct release, while draining is carried out in the floor.

Kinds of toilet bowls depending on type of release

Today on sale you can find a toilet with oblique or direct release, as well as an output that is also called horizontal. When choosing the equipment, it is important to take into account the type of sewerage in the apartment. Toilet bowls with a vertical outlet are fixed to the floor with fastening elements. Most often such products are used in the countries of the northern hemisphere. If it is a toilet bowl with a horizontal drain, it will be placed parallel to the floor, and the oblique outlet is at an angle of 45 ° with respect to the floor surface. If you still do not know the straight or oblique release of the toilet bowl, you should take into account that the first of these occupies less space in the room, which is important for small area bathrooms. In the bowl of this toilet bowl there is a high water level, which ensures hygiene of the appliance. The walls at the washout are washed qualitatively, and the design provides for the presence of a siphon, due to which the tightening force is increased.

Features of the toilet bowl with direct outlet

More and more recently, property owners are wondering which toilet outlet is better - straight or oblique. The first design of the device is typical for buildings that were built in the 60's. last century. Such devices have a branch pipe and a siphon, which are located in the lower part of the hull. Good toilets with direct release in that they do not require the need for a special place for installation.

The toilet with direct outlet can be installed even in the center of the room from any angle. This device will make it possible to implement even the most unusual design solutions. In this case, the sewer line will be located directly under the ceiling, where all engineering communications are located. It will be possible to remove the socket in any convenient place. A toilet bowl with a direct outlet also takes up less space, however, many shops will have to be bypassed for its acquisition, because this device design is not very common today. This toilet is more hygienic due to the fact that the water level in the bowl is high enough. Built-in siphon is characterized by a high retracting force, which allows for an effective flushing. During the use of the device, the anti-slip function is activated, and the tank is designed in such a way that it is reliable and of high quality.

Mounting Features

If you decide to install a toilet with a direct outlet, then in the first stage you should make a marking on the surface, according to which the fastening will be carried out. In the next stage, a screw flange is installed, it must be supplemented with a fixer and a hole, the last of which is made for a joint with the sewage system. Flanges have one size, and the toilet with direct outlet has a standard piece for the joint with the screw element.

The plumbing fixture should be installed so that the counter element coincides with the screw flange. If the structure is slightly rotated, the two elements are clamped, ensuring high tightness due to the sealing ring that is located between them. The toilet with direct outlet has another advantage, which is expressed in the simplicity of dismantling.

For reference

If you need to replace or install a new device, you should be careful, as an error can be made. Direct release is typical for the products of many foreign and Russian manufacturers, Cersanit, Duravit and others can be referred to here. Often companies offer products for sale that can last up to 30 years.

What you need to know about installation work

Which toilet outlet is better - straight or oblique - you can decide on your own, if you know if your bathroom is limited in free space. Despite the fact that in the new buildings are increasingly installed toilet bowls with horizontal drain, do not lose their relevance devices with a vertical outlet. To connect the toilet bowl to the sewage system, prepare:

• The chimneys;
• Corrugated pipes;
• Cuffs;
• Eccentrics.

If you use a fan pipe, you can achieve unity of the device with the connecting material, after all, both are made of porcelain, faience and ceramics. The only difficulty in installing in this case may be the need for a match with the installation site. Fit the trimming method while the elements do not work.

Cuff-eccentric is made on the basis of polymers and is a construction of a pair of bends, in which the axes are shifted. The cuffs can have different lengths, so they can simply be selected to connect the device to the sewage system with other parameters of the socket and tap. The installation of a direct outlet toilet bowl may require the use of a corrugated pipe, it is flexible and can flex and stretch. If you use this element, the master will be free to move and facilitate the installation work. But in this case, one should never forget about the slope of the sewage pipe. You should take care in this case of the rigidity of the material, so that the walls are reliable and durable for further use.

A cast-iron sewer can be connected to a plumbing fixture using a rubber cuff. It is located on one end of the pipe. The toilet should be put on the outlet, the cuff is turned in such a way that it was possible to achieve full sealing. Increase the density of the joint can be done using the sealant.

Required Tools

In order to install the toilet with direct release, it is important to prepare a set of tools, among them: wrenches, screwdrivers, roulette, metal saw, sandpaper, hammer, knife, puncher, sealant and tow. As for wrenches, you will need a set, and as an alternative solution you can make a swivel key. It will be required for installing the drain tank and connecting the device to the system. If the bathroom has an old toilet, then you need a saw for metal. For fasteners, you need a perforator with the winning drill bits, and dowels.

More on installing the toilet with a corrugated pipe

The toilet with direct outlet can be installed using a corrugated pipe. This element is used when it is not possible to use other materials. To do this, the pipe is installed in the sewer hole, and the docking points should be treated with silicone. The device is connected to the other end of the pipe, it is important to make sure that the connection is as reliable as possible. To do this, you must collect water in the tank and drain it. If there are no leaks, then you have done everything right.

It is important to determine the location of the drilling to install the fasteners in the form of dowels. To do this, the toilet is installed on the intended place, so that it becomes possible to mark the hole with a pencil. When the toilet is installed, a direct outlet to the floor of which, in the next step, it is necessary to remove the device from the attachment point in order to drill the holes. They are installed dowels, and the toilet is mounted to the sewage system.

Inside the pipe is smeared with a sealant, and before further action, it is necessary to ensure the reliability of the joint. If the water passes unhindered, then all fasteners can be mounted. It is important to check the stability of the device, if it swings, then a screed made of cement-sand mortar is used under the toilet. The toilet bowls-compacts, the direct release of which must be sealed in the places where the device was tied to the tile. In this case, you can use silicone or sealant. On this, we can assume that the installation with the help of the corrugation is completed.

Nuances of works

If it is necessary to carry out work in the bathroom of the old house, where the cast-iron pipes are installed, then the device must be connected in the following way. The outlet is put into the opening of the sewage system. The remaining gap should be filled with cement mortar, it must be done in such a way that the composition does not fall into the riser. It is possible to apply a cuff that is put on an outlet that is immersed in the opening of a sewer pipe. Preliminary surface must be cleaned of cement, dirt and foreign objects. From the unevenness can be eliminated with a sealant.

Conclusion

Today, there is less use of direct toilet production. The installation of such a device is described in detail in the article and can be carried out by yourself. It should be remembered that the use of a corrugated pipe with respect to the bell at an angle may cause stagnation of water. However, this solution may be the only true, when the toilet is high enough, and its release does not reach the drainage hole.