This cable or accessory is not certified: the cause of the problem and the solutions

"This cable or accessory is not certified ..." - this is a message that you could not face personally, but you must have heard about it. We all know how short the original lightining from Apple is and how expensive they are. Buying a cable not from the manufacturer is fraught with unpleasant consequences. About them, as a rule, they will find out when it is too late. What if you were in a similar situation? How to charge a pet? And why might such an alert occur if everything was in order before then?

Why do users purchase replicas?

The purpose of buying a cable-copy is clear - the desire to save money. The analog of Chinese production is cheaper than Apple products. In this case, a frightening message with the text "This cable or accessory is not certified" sometimes appears not immediately. Someone may have a question: how exactly does the phone recognize that the connected cord is not "native"?

The bottom line is that in this original lightining a special component is installed - a microcontroller. One of its functions is to ensure that the process of charging and transferring data can occur regardless of which side you have inserted the cable. In Chinese replicas, this microcontroller is most likely not available. As an option, it is damaged or just does not meet the requirements of the phone. Because of this, then there are problems.

What problems can arise from using such a cable?

As you can see, Apple strictly monitors the use of non-manufactured products. Special devices do not allow charging, the message on the screen indicates that this cable or accessory is not certified, so the reliability of its operation is not guaranteed.

Of course, one of the main reasons for this phenomenon is the monopoly on production. But the representatives themselves call one more, no less significant: a fake cable is almost guaranteed to seriously damage your iPhone. Firstly, if you use a Chinese replica, the appleaphone can simply stop charging and connect to the computer. As a rule, at the most inopportune moment. Secondly, the original lightining is designed specifically for the iPhone. The use of fake can damage the "apple-apple" because of technical inconsistency. Then your losses will be much more serious than the cost of buying a new cable.

A simple way that can cause the non-original cable to work

Let's say that a phone that has a message on the screen that the cable or accessory is not certified does not charge. What can I do if I can not find a new wire for replacement right now, but do I need to charge the phone? Nobody gives a 100% guarantee, but sometimes this method helps:

1. First, try to insert the cable with the other side.
2. If nothing has helped, and the same message is on the screen, close it.
3. Unlock the phone, then the alert will pop up again. Close it again.
4. Disconnect the wire, and then immediately insert it again.
5. In some cases, after that, charging begins to occur in the normal mode.

How do I charge the device with a copy by turning off the phone?

Another simple option is how you can try to get the non-original cable to work:

• Connect the wire to the machine. A warning appears on the screen. But you should not pay attention and get the cable.
• Switch off the phone. Make sure that the lightining remains connected.
• If this method is suitable for your phone, the charging process will begin. The disabled device can not check the cable and "notice" that it is a copy.

This cable or accessory is not certified: how to bypass through jailbreak?

This cable or accessory is not certified ... You can also solve this problem through jailbreak. The algorithm is as follows:

1. Make a jailbreak of the phone.
2. Start Cydia, where go to the Sources tab.
3. Here you should find the item Support Unsupported Accessories 8. It is this modification that is responsible for activating support for non-original devices.
4. This tweak is absolutely free. Without fear, press "Install".
5. After the machine is rebooted, the changes you make must take effect.

Now, when connecting the charger, the process should take place without problems. Perhaps the message will still appear. However, the result will not be reflected.

What if the problem with the cord appeared from scratch?

The gadget on the screen of which the notification "This cable or accessory is not certified" is not charging? What to do if yesterday you joined this same string, and everything was fine? And are you sure of the noble origin of your cable? There may be several reasons:

• Over time, any technology deteriorates. The charger connector may have become oxidized or contaminated. Perform a visual inspection. Dirt can be removed with any stick, but use sharp iron objects! This will only exacerbate the problem.
• Estimate the condition of the wire itself. A message stating that this cable or accessory is not certified may appear even from the original model if it is damaged. The weakest points are the points of articulation. A small damage can be patched up. But if the shell is seriously broken, there is only one way to the store.

Now, if the message "This cable or accessory is not certified" appears on the screen, you already know what to do. But it's better not to be stingy. Therefore, it advises you to buy the original lightining. Otherwise, the consequences can be more serious than just a discharged phone. Then iPhone will have to be carried to the service center, which will entail even more waste than buying the original cable. It is better to allocate a certain amount and buy the right lace, then pay twice. By the way, the new cable can be further strengthened. Then it will last much longer.