The grinding machine for knives: review, types, characteristics and reviews. How to choose a grinding machine?

To sharpen knives, many people turn to workshops. However, special machines for this purpose are sold in stores. They are of different types and have their own characteristics. The drive distinguishes tape, as well as disk devices. Many models are made in closed cases and are absolutely safe. It should also be noted that there is a good machine in the area of 20 thousand rubles.

How to choose a model yourself?

Many experts advise to give preference to disk devices. First of all, they allow you to quickly gain momentum. The details in this case wear out slowly. The design should be provided with a closed housing.

It is also important to pay attention to the diameter of the saw blade. On average, it is 13 cm. If we talk about tape models, then they are produced with low power. The design they often have an open type. A qualitative ribbon grinding machine for knives in the area of 12 thousand rubles will cost.

Reviews for "Jet 10"

Many buyers respond positively to this machine. Its rated power is 3 kW, and it consumes not so much electricity. The motor is directly installed in the collector type. Guides in the device are located behind the crochet. If you believe the owners, then the connection cable is provided long. The plate in the device is made of steel. The lower block in this case is attached to a special leg.

To adjust the speed of the drive there is a special regulator. Also, owners note the simple design of the device. If necessary, clean the plate yourself. The casing in this machine is made of rubber. The noise level of the presented model does not exceed 30 dB. Knives it allows you to use a thickness of up to 5 mm. The grinding speed is very high. It is worth mentioning the specified grinding machine (market price) about 21 thousand rubles.

Parameters of the Jet-12 model

This model is equipped with a powerful collector motor. On average, the disk per minute makes more than 2 thousand turns. The lower block in the presented modification is made of steel. The legs are fitted with rubberized gaskets. Directly the disc rotates on a special shaft. The maximum thickness of the knife is allowed in 5.5 mm. Buy this machine in the store can be for 18 thousand rubles.

What they say about the machine Touch Pro

The grinding machine Touch Pro stands out with a sturdy frame. In this case, the stand is made of metal. For large knives, this model fits perfectly. It is also important to note that the disc is used in diameter of 13 cm. The power consumption of the model is insignificant. If necessary, the speed of the disc is adjustable. The guides in this model are located in a horizontal position.

For safe use, the grinding machine Ganzo Touch Pro has a fence. The grinding surface of the model is made with a special coating. The shield in the device wears out very rarely. It is also important to mention the compact dimensions of the machine. If you want to move it to a new place is not difficult. A spare wheel for the grinding machine can be purchased from a service center. The specified model is only 13 thousand rubles.

Opinion about Eurotech-2001

These grinders reviews from consumers get good. However, they also have cons. First of all, it is important to note that the knives can be used in thicknesses of up to 4 mm. In this case, the disk is set to a small diameter. The tape in the presented device has a thickness of 2.1 mm. The plate in the machine is made of aluminum. For the convenience of using the tool, there is a roller mechanism. The guides in the model are in an upright position. If desired, they can be cleaned. Weigh the model a little, so you can always transfer it. In this case there is no fence. It is also important to note that the machine does not have a quill. If you believe the owners, then the lunette sometimes breaks down. However, it is important to mention strong stances. You can buy this machine nowadays for 23 thousand rubles.

Specifications FDB TS630 DMX

This knife grinder is characterized by strong discs. The guides on the model are on the sides. If desired, they can be removed. It is also important to note simple management. In this case, the speed of the discs can be adjusted. In general, the lower block is capable of withstanding heavy loads.

If you believe the owners, then the stability of the machine is no problem. For the convenience of using the tool, there is a special corner. The fence is not provided in this case. To fix the discs are used shkify. You can buy this machine in the store for 18 thousand rubles.

Reviews of FDB TS750 DMX

This grinding machine is well appreciated for its compactness. In total, the guide uses two models. Directly the body is made with a protective stand. Rollers for this device are not provided. If you believe the customers, then clean the instrument simply. The power of this machine is 3.3 kW. Work it is capable of a network with a voltage of 220 V. The maximum thickness of the knife is allowed in 4.5 mm. The flywheel in this case is absent. The lock is fixed through the upper beam. Find the specified machine in the store can be priced from 15 thousand rubles.

Parameters of model FDB TS940 DMX

This grindstone grinder is most suitable for domestic use. In use it is quite simple. The case at it is provided low, and the machine weighs only 13 kg. This model has no fencing. For a minute the disk is capable of making about 2 thousand turns. If necessary, you can clean the guides yourself.

The shaft in the device is attached directly to the rollers. The casing is not used in it. If you believe the owners, then the machine works quietly enough. However, there are still drawbacks to the model. First of all, this concerns the rapid wear of the flange. Some consumers complain about the breakage of the quill. In this case, the support should be periodically lubricated. Buy this machine for 22 thousand rubles.

What they say about the machine "Korvet-470"

This machine is chosen by many for its versatility. It allows you to handle knives of different thicknesses. It is also important to mention the large diameter of the disc. All this makes it possible to sharpen the edge of the knife without problems. If you believe the owners, then the shake of the device is small. However, the loudness of the machine annoys many. The sound level of the presented model is at the level of 45 dB.

Flywheels in the device are attached behind the shaft. The case of the model is not widely used. If you want to rearrange the device you can. Shields in this model can be cleaned by yourself. It is also important to mention the strength of the guides. The flange in the device is made of aluminum. You can buy this machine in a shop for only 18 thousand rubles.

Opinion about "Corvette-500"

This machine is specially designed for domestic use. In addition to knives, it is possible to grind various metal objects. The power is low, but the model has many advantages. First of all, buyers note the strength of the structure. The support in the device is made of steel. The legs of the model are included with rubberized gaskets.

If you want, you can adjust the speed of the disc's rotation. The flange of the model is made of aluminum. A casing is used to protect the device. Due to it, the noise level does not exceed 33 dB. The shield is not installed in this case. Also, this machine is not equipped with a protective guard. Thus, when using it, you need to be extremely careful. Buy this model can be today for 23 thousand rubles.

Characteristics of the machine "Korvet-510"

This machine is equipped with a disc of 14.5 cm. The upper plate of this device is attached to the spring. Corner is made of aluminum alloy. If you want, you can clean it yourself. If you believe the feedback of buyers, then this machine is very rare. However, it is important to note its low power. For long knives it does not fit. The maximum thickness of the product is allowed at a level of 3.5 cm. The protective casing in the device allows you to work safely.

It is also important to mention the compactness of the structure. The support is made of metal, and is capable of withstanding heavy loads. The speed of the disk revolutions is easy to adjust. Also it is necessary to mention the stability of the instrument. The frame of the model is made of steel. You can buy this machine for 22 thousand rubles.

Reviews about Profi Cook 1090

This lathe (grinding) is in our time in great demand. In this case, the plate is installed with a roller mechanism. Directly the disk is used in a diameter of 13.6 cm. The transmission system of the device is missing. Separately, it is important to mention the quality of the case. It is manufactured with an anti-vibration system. If desired, the bed can always be adjusted.

The disk in the device is durable, and sharpens the knives very high quality. The user can change the angle of the product's position. The guides in the machine are located under the plate and are in an upright position. If you believe the owners, then you can serve the machine for a long time. You can buy it for 17 thousand rubles.

Parameters of Profi Cook 2030

This machine (grindstone) is very rarely used in everyday life. First of all, it is important to note that it weighs as much as 22 kg, therefore it is problematic to rearrange it independently. Also the design width deserves attention. The stand is made of aluminum. The flange is directly behind the clamping spring. If you believe the owners, then clean the specified device easily. It is also important to mention the ease of operation. Roller mechanism in the device is not provided. The rotational speed of the disc is adjustable. Buy this machine user can for 15 thousand rubles.

What they say about the machine Profi Cook 1055

This machine (grinded) reviews from customers receive a positive. If we talk about the parameters, then the power of the device is 3 kW. The disk is set to 13 cm. A cover is used to protect the system. The volume level of the device does not exceed 20 dB. The flange of the model is not wide. The plate itself is made of aluminum and does not weigh much. The flywheels at the machine are not used. The engine is located at the bottom of the structure.

Roller mechanism is located just below the plate. Knives on this machine can be processed to a thickness of up to 4.5 mm. The grinding speed is high. It is also important to mention a long power cable. Thus, you can install the machine anywhere. The model has no anti-vibration system. It is worth in our time such a machine (whetted) about 19 thousand rubles.