Sound does not work after upgrading Windows 10 to a laptop

Now most computer users have started complaining that they do not have sound after the Windows 10 update. It has long been known that this operating system is full of errors and flaws. But their corporation Microsoft is trying to eliminate as soon as possible. Not always successfully, but still. For what reasons can the sound fail to work on Windows 10? What should I do in this case? Let's try to figure this out so that in the future there are no problems.

Turned off

Perhaps the most common and rather stupid option imaginable is when the sound does not work after the Windows 10 update, due to the fact that at the end of this event, the settings have simply disconnected. Sometimes during the process the sound card stops working. And after the update in the settings, the sound is simply turned off.

In this case, it must be enabled. To do this, pay attention to the image of the mixer in the tray, about the clock and the current date. If there you saw a red crossed circle, then the problem is precisely this. Press the mixer and adjust the volume. That's all, no torture. As already mentioned, this is a fairly common phenomenon. But nevertheless, users say that after the Windows 10 update, the sound does not work for them for other reasons. A mixer or not, or it shows that all settings are on in the system. What to do in this case?

No drivers

For example, remember if you installed the drivers for the sound card or not. Often, after the installation of the operating system is completed, up to "dozens" about this event are simply forgotten. And there is nothing surprising that without the drivers the sound does not work.

The situation is being rectified, as it is not hard to guess, by installing the missing elements. Note: the corresponding software should be designed specifically for Windows 10. Otherwise, the result will be zero. Install the drivers, reboot the computer and see what happened. If the error is fixed, you do not have to worry anymore. And if not? What then?

Software incompatibility

You do not have sound after updating Windows 10, but are the drivers installed? In this situation, there are several options. And the first of these is incompatibility of the software with the operating system.

It is no longer a secret that Windows 10 is a huge problem for modern users. With this operating system, most software is not compatible. In this case, it is recommended or to find some driver for your sound card that is suitable for "Windows 10", or replace the corresponding hardware. Yes, not the best methods, but they have a place to be. And, frankly, incompatibility of drivers with the system is a very common reason why after the Windows 10 update the sound on the laptop or computer does not work .

Equipment

Maybe a slightly different alignment. Especially it concerns those users who additionally connect the speakers to their computer. After the Windows 10 update does not work sound? What to do in this situation? Check the presence of the driver on the computer. And if everything is in order, then it's time to look in the instructions to the columns. For what?

Maybe your hardware is incompatible with the installed operating system. With the "ten" such phenomena occur very often. Users do not even suspect that not all hardware is working properly with this operating system. Moreover, old devices 100% will cease to function on the "top ten". Consider this.

What can you do if you find incompatible equipment with the system? There are three options - or work with "Windows 10" without sound at all, or replace the operating system with an older version, or buy a column that will accurately begin to work properly with the "ten". What kind of decision to make - everyone decides for himself. But, as practice shows, users prefer to install themselves older versions of "Windows" to fix the situation.

Bad installation

But not everything is always as bad as it might seem at first glance. Sometimes the sound does not work after Windows 10 upgrade due to system failures during the installation process. In this case, you can observe a lot of errors and problems in the operating system. Users call this phenomenon a "curve setting".

How is the situation corrected? Quite easy and simple. All you need to do is reinstall Windows "10". It is advisable to format the hard disk before doing this. If after the reinstallation of any system failures and failures did not occur, then after restoring the drivers for the sound card, you can use the sound as before. Otherwise, the process will need to be repeated several times. However, constant reinstallations of the system with the purpose of the decision of problems with a sound do not suit users. They prefer to abandon the "tens" and work on older versions, where there are not so many failures.

Browser

An important moment for a modern user and work with the Internet. Some note that they do not have sound in the browser after updating Windows 10. There may be several reasons for this phenomenon.

The first is the incompatibility of the software version with your operating system. In this case, you will have to install a browser that is designed to work in "Windows 10".

The second is system failure. According to the users, it helps here to reinstall your browser. Sometimes you can just restart your computer. Also helps, although not so often.

The third is the presence of viruses on the computer. However, if you have just updated the operating system, then this layout is not suitable. Otherwise, the computer will have to be cleaned of spies and other infections.

As you can see, there are a lot of options for which the sound does not work after the Windows 10 update. And not all of them are dangerous. Yes, this is not such a pleasant phenomenon, but on new operating systems this kind of "behavior" is extremely common. And it is necessary either to put up with it, or to refuse to work with innovations for a certain period of time.