Homeliness, Building
Some information on how to lay laminate with your own hands
In recent years, people in the repair of their apartments or houses are increasingly turning their attention to laminate flooring. The reason is simple: since laying a laminate with your own hands can even beginner, there is an opportunity to seriously save on the call of professional masters. There are lots of options for this floor covering, so that everyone can choose the most suitable for them.
Before laying the laminate with your own hands, you need to know about the ways of its installation. There are glue and glue-free options. If adhesive mounting is used, then a fastening connection is used to fasten the panels together. As a result, you get a very strong and reliable seam, through which even water can not penetrate.
What you need to buy before you start:
• Hammer, better with rubber coated work surface.
• A conventional block made of solid wood.
• Electric jigsaw, since a hand-sawed laminate flooring is very difficult.
• Before laying the last row of the laminate, A clamp will be needed.
• To ensure adequate clearance from the wall, wooden wedges are needed.
• Roulette and pencil.
• If you are laying on concrete, you will need a polymer film and a good adhesive.
• Again, a substrate is needed for the concrete floor.
Before work, inspect the material: in case of detecting any defects, it is better to put it aside. Remember that laying on the carpet (due to static electricity) is prohibited, but it is possible to mount the old parquet if it is dry and clean. Note that the laminate should be laid perpendicular to the windows and other light sources, since in this case the seams will be the least noticeable.
Begin from the wall, driving between it and the panels wedges. Gaps are needed so that the material has enough space for its possible expansion. Lay the panels so that their locks are pointing in your direction. Before laying the laminate with your own hands on, carefully inspect all the locking joints, as in the case of the slightest defects, the seams can disperse, forming unpleasant faults.
The panels should be joined to an audible click. Continuing the installation, constantly monitor the flatness of the floor with a level, and do not forget to follow the wedges that should remain in place. As we have already said, for the last row one should take the fixing clamp.
So you learned about how to lay laminate flooring with your own hands! If everything is done correctly, the floor covering will long please you with its aesthetic appearance.
Similar articles
Trending Now