FashionShopping

Skirts-tutu for girls with their own hands: patterns, description and recommendations

Over the past few years, skirts-tutu for girls have gained unprecedented popularity. Still would! After all, they are beautiful, smart, they just do, and they are inexpensive. Skirts-tutu for girls allow you to create different costumes, and the children of them grow less quickly. Read on, and we'll tell you in detail how to make such beauty with your own hands.

A simple tutu skirt made of tulle for a girl

In order to make a basic model, you do not even have to sew anything.

For work we need:

  • Tulle - the exact size depends on the desired length of the skirt, you can take ready-made tulle ribbons;
  • Satin ribbon 1-1,5 m - depending on the waist circumference of the child;
  • scissors;
  • A cardboard height equal to half the desired length of the skirt.

Operating procedure:

  1. Cut the tulle into strips with a width of 10-15 cm. The most convenient way to do this is if you roll out a roll and mark with needles each 10-15 cm. If you have finished tapes, then this step is skipped.
  2. Take a cardboard and wrap tightly around her tatty stripes, fixing them with a rubber band for money. Cut the strips on one side.
  3. Continue until you have about 80 pieces.
  4. Lay out the satin ribbon. Now take the tulle strip, fold it in half. Put the loop on the satin ribbon and thread the loose ends so that the knot turns out. Continue to repeat until the material has run out or the desired volume is reached.

This concludes the work. This version of the skirt-tutu for girls is good because the child will be able to wear it for a very long time - the waist girth can be changed, as it increases, and the volume of the hips or the length do not play a role due to the features of the style.

If you want to facilitate the putting on of clothes, then replace the satin ribbon with a wide elastic band.

Experiment with different combinations of colors - from this the result will only be more interesting.

Interesting variations

Skirt-tutu for girls often become the basis of thematic costumes. For example, here's how you can simply make a ballroom outfit Belle from "Beauty and the Beast":

Here, the basis for taking a wide elastic openwork bandage, which can easily be found on sale. And the tulle of 2 shades of yellow color is attached in several layers. This is possible due to the large number of rows of holes based on. The top layer of ribbons is trimmed and decorated with bows to simulate ruffles dresses, like a princess in a cartoon.

The dress of one more crowned favorite of girls is made on the same principle, but even more simply, without upper straps.

Behind the top of the bandage-base is made one row of stripes of white tulip to simulate the cloak of Princess Elsa.

How to sew a skirt-tutu for a girl with her own hands?

If you know how to work with a typewriter and are familiar with the fundamentals of cutting, you can make this charming model.

Materials:

  • Tulleth 5 m;
  • Lining 1 m;
  • Dense knitted fabric 0.25 m;
  • Wide elastic band - 1 m;
  • Sewing accessories.

How to work with step-by-step photos

  1. Cut the tulle by 10 pieces of 0.5 m wide each. Since we are considering how to sew a skirt-pack for an older girl, we note that the product should be long enough. If you need a skirt shorter, then cut the tulle.
  2. Now put in the typewriter's paws or set the stitch length longer than usual, and the thread tension is weaker. Fold the tulle by half and stitch the upper edge, gradually joining the pieces together. If you worked without a special paw, do not secure the seam in any way, and then gently pull the ends of the thread to attach the skirt.
  3. The width of the product should be equal to the circumference of the child's waist + 15 cm. When you pulled the fabric to the desired size, stitch its edges back and forth to close the circle.
  4. Cut the lining material so that it is 2-3 cm shorter than the end of the tulle, taking into account the allowance for the seam.
  5. Stitch it on the side to make a tube of fabric, then attach the top in the same way as you did in the previous step with the top layer of the skirt.
  6. Sew the tulle and lining together.
  7. To make the skirt look neat, you need to make a belt. First, we cut it too wide to gently fold it. So, cut out of the knitted fabric 2 strips, equal in width to the waist + 10 cm. Sew the short sides at a distance of 0.5 cm. Stretch one side, leaving a hole for the rubber band. Fold the resulting circle half-and-half inside out and iron to outline the bend.
  8. Now attach the belt on top of the skirt and stitch it. Attention: the side with a rubber hole should be far from the edge of the tulle and the lining.
  9. Now bend the belt around the ironed bend and sew it with a "zigzag" seam.
  10. Pass the elastic band (determine its length, trying on the child in a slightly stretched form + allowance for the seam), sew its edges. If desired, decorate the bow.

Lush and simple

Look how smart this lovely skirt looks. Do you think it is difficult to make it? In fact, sewing a skirt-tutu of tulle for a girl in this technique is extremely simple - you do not even have to be able to do a straight line. If there is no sewing machine, then you can repeat the process manually, but it will take much longer.

Materials:

  • Dense fabric - 1 m;
  • Tulleth - 4 m;
  • Wide elastic band - 1 m;
  • Threads and other sewing accessories.

How to sew such a skirt?

The order of work is as follows:

  1. Make the base skirt a sun. First, cut out the "bagel" from the fabric with a pattern of this kind. Here the green bar is the radius of the inner circle, which is equal to the girth of the girl's waist + 5 cm at the seams, divided by 6.28. The pink line is the desired length of the skirt. Fold the fabric four times, attach the pattern and cut out.
  2. But if you sew the ruches to the full "sun", the skirt will turn out to be too big. Therefore, reduce its size by cutting out a sector equal to about 1/8 of the circle. Sew both sides and stitch the bottom edge.
  3. Now we decorate the skirt-base. To do this, cut the tulle ribbons and pinned them on the surface, all the time picking. But do not rush to fix too much tissue, squirt it as the work progresses. This is how it looks from the face and from the inside:
  4. Since the tulle is magnificent, it will easily cover small defects, the main thing is that the threads match well in color.
  5. Now measure out the desired length of the gum (+ allowance for the seam), pin it on the top edge of the skirt and stitch, slightly stretching.

After that, the skirt is ready.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.atomiyme.com. Theme powered by WordPress.