Self-replacement salon filter "Reno-Fluence"

Do you have an unpleasant smell in the cabin or is there a shortage of fresh air? This is a signal that you need to change the salon filter. Consider the process of replacing the air filter in the cabin of the Renault-Fluence car. This car of the French brand is more comfortable than the "Logans" and "Dystery" of the budget class. The timely replacement of consumables will guarantee the preservation of this comfort.

Where is the filter located?

In this car, this element is located directly in the cabin, which simplifies the process of replacing the consumables with a new one. Do not even open the hood. However, did the French really simplify our lives? Replacing the salon filter "Renault-Fluence" will require dismantling half of the front passenger panel, because there is a salon filter unit under the glove box .

Replacement with incomplete parsing

To make a replacement and not to dismantle the salon, you can resort to trickery. In order to change the filter, it is necessary to disassemble the sidewall of the center console, which is located in the feet of the front passenger. The panel keeps on clips. Using a special puller it can be removed without difficulty. To get to the right place, it will take a little effort. Next, unscrew the tube fastening, which is suitable for the salon filter. It is attached with a small bolt. It is most convenient to do this using a ratchet with end nut heads, but in the absence of it a conventional wrench is also suitable .

Pushing aside the hose, you can open the lid of the cabin filter. The device itself does not have a rigid body, but only a soft inner element. Replacing the salon filter "Reno-Fluence" with their own hands is not such a complicated process. Most importantly, carefully remove the salon items so that you can easily collect everything back. If, during the assembly of the cabin, you broke the fastening clip, then it must be replaced with a new one, otherwise scratches may appear.

If you decide to remove the glove compartment, so that replacing the Salon Filter "Renault-Fluence" was more simple, it is better to immediately go to the service. Deconstructing the interior is not so easy, because everything must be done very carefully. If the attachments are damaged, you can simply reduce the comfort from driving on the car due to the appearance of "crickets" and creaks.

Periodicity of replacement

If you do not lead to heavy pollution, then the replacement of the salon filter "Renault-Fluence" is made every 10 000 km. It is easiest to combine this procedure with the replacement of oil and other consumables, which is produced with a similar mileage. Use better original spare parts or certified substitutes. When using other spare parts before installation, be sure to check all sizes. Often, Chinese manufacturers make parts that do not match the original. The use of such a filter will simply be meaningless, as it will skip a part of the air. You can correct this situation with the help of a sealant, but you must wait for it to dry completely, otherwise it will be extremely difficult to remove the cabin filter the next time you replace it.

In fact, the replacement of salon filter "Reno-Fluence" can be carried out and at a lower frequency, especially if you move exclusively around the city and run a ten thousand you reach in a couple of months. In this case, it is possible to change the filter one time or check its state before replacing.

If you move a little on your car, then change the cabin filter better each year, for example, before the arrival of winter. In this case, again, it is desirable to combine the replacement of all consumables. Before replacing the salon filter, you can do a cleaning of the ventilation system, this will significantly improve the result of maintenance. Clean the system better by specialized means.

Engine models

All models of motors of this brand supplied to our country have approximately the same design. Replacing the salon filter on the "Renault-Fluence" 1.6 is the same as on a car with a 2.0 liter engine. Much more common when the cabin filter is located in the engine compartment, next to the stove. In this case, it will not be difficult to replace it either.