How to wash a car in a self-service washroom: a step-by-step instruction

Throughout Russia and the CIS countries, self-service washers have recently become popular. The car enthusiast arrives, he receives a water cannon, and as a result, stains and stains on the body. But they promised the maximum purity. The fact is that you need to be able to use this innovation. Let's see how to wash the car in a self-service car wash so that in the end get it clean and sparkling. The season of dirty cars began, which means that every driver will go to the car wash. For those who like to wash the car quickly, inexpensively, but at the same time qualitatively, there are such services. Every year they are rapidly gaining popularity. Yes, these are the same car wash, where the owner himself pays for the service, and with his own hands washes the car. What is the secret of success?

Read the instructions

This is the first thing that owners say, answering the standard question of the car enthusiast, who is interested in how to wash the car in a self-service wash. And indeed indeed, practically at each sink such instruction on the equipment operation is available. But it is clear that one instruction is not enough. Let's look at each stage of using the sink to get a high-quality result.

Practically all types of washing of this type offer the client a minimum of five possibilities: preliminary cleaning, basic washing, rinsing, coating the body with wax, as well as applying gloss and drying. Sometimes the service for cleaning wheel rims, which takes 15 seconds.

The machine "ate" money, a pistol in hands, a choice of the program

So, at the very beginning it is suggested to use a prewash. It is needed in order to make the dirt softer and raise it, without damaging the car body. Usually they pour the entire body. And to make it effective, it is better to wash from the top down. The gun should not be held closer than 25-30 cm from the body. At this stage, there is no need to wash all the dirt completely. From the gun is not supplied with ordinary water, but a special solution. Its active ingredients work with dirt, but do not wash it off. Most car washes take about 45 seconds at this stage. This time is enough for pre-processing of cars and SUVs.

Basic car wash

Here everything is clear from the title. Let's see how it is better to wash the car in a self-service wash at this stage. With the help of distance changes, as well as the angle of the gun, it is necessary to thoroughly clean all dirty places on the body with hot foam. The solution is fed under pressure. At this stage, no more than 120 seconds are allowed. To get a better effect, the solution is applied and washed off horizontally. At the same time, it is necessary to move from the bottom to the top on the sides of the machine. Initially, the side parts of the body are processed. Then - the back and front. At the very end of the process, the roof, hood and trunk are washed. This is how it is recommended to work with this device.

Rinse Mode

This mode is designed to remove active foam from the body surface. No need to exert effort, since this is not the last stage. According to the owners of car washes, the average car owner should spend no more than a minute on this procedure.

Waxing

A thin layer of wax coating can protect the body from the effects of dirt, dust, various chemical reagents that with "appetite" eat not only ice and snow, but also metal. The coating process will also take about a minute, depending on the specific washing.

Gloss and drying

This procedure, as it turns out, is not less important for a qualitative result. If you select this option, the driver receives a special demineralized water in which a special substance is diluted. It accelerates the drying process. Wipe the car is not necessary. We have my car on a self-service car wash, and there are no rags and bastards here. In addition to the protective function, this coating will give LCP a shine. This procedure takes two minutes.

Experts recommend

Especially important in the whole process, the last program is rinsing. But with the use of not ordinary water, but the one that went through osmosis. The demineralized liquid is thoroughly filtered. If you stop on an ordinary rinse, then the gun is supplied with ordinary water, after which there will be streaks and stains on the body. It is the latter procedure that will make the car perfectly clean. There is additionally added and drying. But this is not a huge hair dryer, but a special chemical that helps the water to escape faster from the surface of the body.

The director of the company for the production of such car washes knows how to properly wash the car in a self-service wash and gladly shared secrets with ordinary motorists. One of the problems when motorists complain about a poor-quality car wash is the failure to use all the provided programs. If you choose washing using only active foam and water, without using wax and osmosis, the car will not be clean. The paintwork will quickly get dirty and will dry longer. Not everyone knows how to wash a car in a self-service wash so that the result is as effective as possible.

Wash for 10 minutes and be happy

The creators of these complexes thought of everything so that the user could completely wash his car within 10 minutes. To do this, use all the options.

But visitors to such washes in profile forums write reviews in which they do not agree with this. The main thing that can be distinguished from these reviews is the weak pressure of the water supply. Instead of a high-quality active foam, only a little soapy water is supplied. With such chemistry, it is difficult to achieve purity. You can only slightly remove dust, small dirt or snow. Sometimes these or other options may not work. Chemistry does not please with its strength. And how to wash a car in a self-service washroom in such conditions? The owners of the sinks are responsible for the chemicals. They control the level of concentration of chemicals in the machine, as well as the strength of the water supply pressure. Ideal situation - when the main washer the gun is kept with a slight tension. Low head pressure is a service problem that should be eliminated. Very rarely there are car washes, where the motorist himself regulates the amount of chemistry and water pressure. And here there is no problem even for such a task as washing the car in a self-service car wash in winter. If all systems work as it should, then there will not be any problems even in severe frost.

Such washes exist for a long time already, and drivers have learned to adapt to the program modes for them. Someone first applies active foam to the bodywork and waits for it to act. Others keep the pistol almost back-to-back with the bodywork. You should wait a little after each option. The third category of drivers generally change options in places.

That's what the professionals say, about how to wash the car in a self-service wash. The instruction is correct. But if the car did not wash during the winter, first you should visit a hand wash. There the body is degreased. And then you can come to an automatic sink, which will simply maintain the clean state of the machine.

What in the end?

Naturally, with simple dirt, the self-service wash will cope with a bang. It is important only to develop your skills or be guided by what is written in the manual. It is necessary to understand that for a good effect, all options should be used. If the car is in a neglected state, then with a mud cake such washes can not cope. It is necessary to go to the manual, where the professional washers will wash the car.