Self-defense bracelets: step-by-step instruction

Often, there are situations where there is not enough vehicle to overcome a certain section of the road. We are talking about steep, frozen rises, on sites with deep mud, on a snow-covered road. You can get out of these situations by buying or making anti-skid bracelets with your own hands. Even an ordinary tire, which is necessary for driving on asphalt, with the help of such a device will get excellent qualities, typical for SUVs.

Advantages of chains

Using such devices, the driver will get excellent cross-country ability in deep snow. Significantly improve the coupling characteristics. Accordingly, the controllability on the frozen areas will increase. In addition, you can successfully overcome the mud areas. Many motorists love to travel on the roads of Russia, off-road. They often upload photographs and videos on a variety of resources, with which you will see how effective anti-skid bracelets are. By their own hands, besides, it's not difficult to make them.

Negative features of bracelets

Naturally, the chains also have shortcomings that can limit their use. You should pay attention to them in order to avoid unpleasant situations.

1. First of all, it will be necessary to take into account that the suspension with the steering will be subjected to increased loads. Accordingly, along with high cross-country capacity, increased wear will be obtained. Particularly strong will suffer steering rack, if the chains are installed on the front wheels.
2. Another important factor is that tire wear will increase . Accordingly, the period of their service will be greatly reduced.
3. The made anti-skid bracelets with their own hands will lead to wear of the gear box.
4. The speed of movement will be limited to 50 km / h.
5. Do not forget about the acoustics - the chains are able to produce a strong enough noise.

Use of soft chains

You can resort to a more gentle option, with which you can increase the throughput of your vehicle. It's about using rubber or plastic chains. The made anti-skid bracelets with their own hands in this situation will have weaker off-road parameters. However, the fatal wear of tires, suspension, transmission can be avoided. In addition, the speed of movement will increase (up to 90 km / h), which is also an important factor.

Wheel bracelets anti-skid can be divided into two categories. They can be soft and hard. Both versions are longitudinal ropes or chains (in the number of two pieces), which are stretched along the circumference of the wheel. Between them, it is necessary to stretch the transverse chains or grousers made of plastic or rubber.

What are the chains?

The crossbars can be made in the form of a ladder, a rhombus or honeycomb. Each of these options has positive and negative points. The scaffold is characterized by improved rowing capabilities. It is better to resort to it in the event that it is required to overcome the mud portion of the road. However, one should know that such anti-skid bracelets lead to the wheel being able to "bury". Therefore, riding must occur "vnatyag". The driver may encounter other problems. The car will have poor lateral stability. Tires will start to wear out faster. Transmission with the steering will be subjected to a stronger impact load

Wheel anti-skid bracelets with a pattern in the form of honeycombs will cause less damage to the main components of the vehicle. Tires will also last longer. In comparison with the ladder, such patterns can provide better lateral stability. Constant contact with the surface will also be obtained.

Features of rigid and soft chains of anti-skid

Unequivocally it will not be possible to answer which chains are preferable. Each has its own advantages in certain conditions. Therefore, there is no universal option. Rigid chains are best suited for full off-road. Due to more pronounced rowing abilities, they will allow to overcome a difficult area, encountering fewer difficulties.

If you decide to make soft anti-skid bracelets with your own hands (photos of such structures can be seen in the course of reading the review), then it should be understood that with their help storm off-road can not be. But such systems will help to overcome difficult areas. Advantages of this option are that plastic or rubber chains can be removed as soon as a complex area has been passed. Accordingly, further movement will occur at a higher speed, without the risk of damaging tires or powertrain transmissions.

When choosing rigid chains, attention should be paid to the size and cross-section of the links. The more they are, the better will be the rowing possibilities. But the wear of tires, gearbox and steering will increase noticeably. Links with a square section also contribute to improving the rowing qualities.

How to make chains with your own hands?

Since the cost of such structures is quite high, you can make anti-skid bracelets with your own hands on the VAZ, "Gazelle", "Niva" or other vehicles. The process is not complicated. All the necessary items can be found in the building stores. It should be understood that self-made structures will cost less, and their quality will not be inferior to the purchase options. And the benefits are easy to find.

The easiest way is to make a ladder with your own hands. To do this, measure two segments of the chain in such a way that they are slightly smaller in length than the length that is characteristic of the wheel circumference. Using S-shaped hooks, cross sections must be fixed between them. They should have an equal length, which will slightly exceed the width of the tire.

Doing anti-skid bracelets with your own hands on the "Gazelle" or other vehicle, you must connect with each other longitudinal segments. For this you should use the carbines. In the middle of each longitudinal segment, it is necessary to fix the tensioning device. The other end is attached to the carbine with a hook. This device will help to reliably secure the made anti-skid bracelets with your own hands (on the "Niva", VAZ or other vehicle) on wheels.

Chains with a diamond pattern make it much more difficult. But you can also cope with this task if there is a desire and perseverance.

Chain installation on wheels

Installation in no way depends on what kind of chain is planned to be put on the wheels of the car - self-made or factory ones. You can install bracelets in several ways. The machine should be subdued so that the wheel assumes a suspended state. After that, it is required to put on a bracelet. This method of installation is simple. However, time will have to spend more.

The second variant of fastening

The second method is faster. However, experience and skills are needed. It is necessary to arrange chains with bracelets on the ground, carefully straightening them. After that, they will need to be driven so that to the end there are about 30 cm left. Then this long part of the bracelets must be put on the wheel. From the inside, the chain will need to be fastened using a hook. All links must be straightened. External sides will also need to be fastened together. After that, the bracelet is tightened by means of an adjusting cable. This method is optimal in the event that you need to fix the made anti-skid bracelets with your own hands on trucks.

It is not necessary to fasten bracelets on all wheels

Before jumping off the storm off-road, drive about 50 meters and pull up the chain again. Due to this, you will extend the durability of the tires. It should be noted that wearing all-wheel bracelets is not recommended if the vehicle is not all-wheel drive. If the car is normal, then it's enough to put chains on the driving wheels.

Conclusion

In this review, we examined how to make anti-skid bracelets on a vehicle with your own hands. In this there is nothing complicated. Simplicity differs and their installation. Therefore, with a little effort, you can achieve the goals. And impassability will not be frightening anymore. The difficult part of the road will be overcome quickly and successfully.