Royalthermo - bimetallic heating radiators: specifications

Royalthermo - radiators that have European quality. They are manufactured in factories in Italy for half a century, the technology has been continuously improved over this period, and the parameters and characteristics have become better.

To date, it is almost ideal in terms of design and efficiency of radiators. Research in this area has not ceased, and tireless work has been carried out to improve the designs and materials. In the Russian market, such products appeared relatively recently, but during this period, the owners of apartments and houses had time to evaluate the advantages of these products before those that are made of steel or aluminum, as well as cast iron. If you also plan to change the heating batteries in the house, then it is worthwhile to consider in more detail the qualitative characteristics of these products.

Technological features

Royalthermo - radiators, which are manufactured using a special technology, during which magnesium and manganese are added to the aluminum, as well as silumin alloy. This technique allows you to get a more ductile material. As another development of the company is the use of titanium as an additive. This component can improve reliability and durability. As a result, a uniform composition with unchanged characteristics is obtained, which is not affected by temperature. High plasticity made it possible to realize curved complex lines of radiators.

Technical characteristics of bimetal radiator models Royalthermo

Royalthermo - radiators, which are presented for sale in the form of bimetal products, they can have different characteristics. For example, the BILINER 500 can operate at a pressure of 30 bar, the test pressure is 45 bar. The heat transfer of one section is 171 W, which is true at a coolant temperature of 70 ° C. The burst pressure is greater than 200 bar, while the volume of water in one section is 0.205 liters. Weighs 1 section of 1.9 kg.

Royalthermo - radiators, which are compact. If you are interested in the above model, then it has the following dimensions: 574 x 80 x 87 mm. On sale it is possible to meet and model REVOLUTION BIMETALL 500, which can work at the same pressure as the above. The pressure on the rupture remains the same, but one section will weigh a little less, the mass is 1.8 kg. The volume of water in one section is unchanged, but the dimensions are more compact and equal to 56 x 80 x 80 mm.

You may be interested in the model REVOLUTION BIMETALL 350, the heat transfer of one section in this case is 116 W, as in the above case. The working and testing pressure in all models remains at the same level as the pressure on the break. But the mass of one section will be even smaller and amount to 1.4 kg. In one section will be placed 0.175 liters of water, the dimensions are as follows: 415 x 80 x 80 mm.

Radiators "Royal" are for sale in a wide range. As one more variant it is possible to allocate VITTORIA 500 which is capable to provide теплоотдачу within 160 Вт, that is true for one section. The weight of one section is 1.75 kg, and the volume of water in it is 0.205 liters. The dimensions are slightly larger than the previous version and are equal to 560 x 80 x 80 mm.

If you are interested in radiators "Royal", then it is worth considering the model VITTORIA 350, the heat transfer of one section which is 114 watts. Weigh 1 section 1.35 kg, and the volume of water is 0.175 liters. If you plan to purchase this equipment, you should be interested in its overall dimensions, which correspond to the following parameters: 408 x 80 x 80 mm.

Additional characteristics of the radiator brand BiLiner 500

The Royalthermo BiLiner equipment has been described above, but if you plan to purchase it, you should become more familiar with its characteristics and features. The price will be 800 rubles per section. These devices were created in accordance with high requirements for design and thermal characteristics. The development was carried out by specialists of the Italian studio of industrial design. Specialists in the field of modeling and aerodynamics of aircrafts took part in the works. As for the heat engineering part, it was dealt with by Russian specialists in the field of thermodynamics.

By purchasing Royalthermo BiLiner, you can be sure that the computer simulation was carried out during the development, which allowed to achieve the ideal balance of convection and radiant heating, which were distributed in a proportion of 50 to 50. The heat transfer is also quite high, which is a unique characteristic for sections of such a compact size.

Positive features of BiLiner 500

As a distinctive feature, we can distinguish the presence of a steel collector, through which the coolant flows. Thus, water does not come into contact with aluminum, which means that the life of the device will be impressive.

Such devices are ideally suited for central heating systems, the operation of which is marked by a super-aggressive coolant and high pressure. The room will warm up evenly due to ideal convection. The equipment has a high-class aerodynamic design, in the manufacturing process the surface is painted with a special protective composition in two stages.

Mounting recommendations

Royalthermo bimetallic radiators should be installed according to certain rules, which will allow achieving ideal results. Thus, from the floor the device should be removed by 13 cm, while from the wall - at a maximum of 5 cm. The minimum value is 3 cm.

From the window sill the battery should be removed by 10 cm. When carrying out installation work, it is necessary to use those fasteners that are supplied and are universal. It is important to use a mounting kit that is suitable for pipes with a diameter of 1/2 and ¾ inch.

Conclusion

The radiator Royalthermo revolution and many other devices of this company are known to the Russian consumer for 15 years already. Over this period, the products have become popular, and the company has achieved some success. The firm emerged as a result of the merger of Italian organizations and a popular British investment company. All radiators are made by the technology of casting under the influence of pressure, which allows to obtain cast sections of the most diverse designs and various designs.