Carbon filters "Folter": technical characteristics, applications

Carbon filters "Folter" are sorption devices that are designed for air purification.

Technical characteristics of the filter of grade ФяС-С

This device is presented for sale under different indices, namely: 302, 304 and 301. Each model has its own features, performance and size. Below, we will present qualitative characteristics for filters of grades 301, 302 and 304, respectively. The capacity in the first case is 1700, in the second - 2900 and in the third - 3500 meters per hour. It is important to take into account the aerodynamic resistance, for each model it is 130 Pa. The filtration area differs and is equivalent to 6, 9 and 12 meters square.

The mass of activated carbon in each model is 2.4; 4.8 and 3.6 kilograms. The recommended operation parameters for each model remain the same, the temperature is 30 degrees, but not more, but as for humidity, its level should be 60% or less. When choosing a particular model, it is necessary to take into account the overall dimensions. For the 301 filter, they are 592x287x292 millimeters. Model 302 is limited by the following dimensions: 592x592x292 millimeters. The model 304 has dimensions equal to 592x490x292 millimeters. Choosing the described carbon filters "Folter", you must take into account the moment that their mass differs. In the first case, this value is 7 kilograms, in the second - 12, while in the third - 9.5.

Scope of use

The cell panel is of high quality and cost effective. Folded carbon filters are used for cleaning exhaust, supply and recirculation air from odors, gaseous pollutions in air conditioning and ventilation systems. To use similar installations it is possible for premises of different purposes, namely medical institutions, buildings of household and administrative purposes. Coal filters "Folter" can be used for cleaning air to environmental and sanitary standards, with their help you can improve the quality of supply air to a higher comfort.

General device

The "Falter" carbon filters described above have, as a part, a case made of galvanized steel, inside which a filtering element is laid in the form of folds. In order to exclude clumping of adjacent folds, corrugated separators are laid between them, which are made of aluminum foil. A filter bag containing a material with a padded separator is sealed securely in the housing with a sealing material for sealing with a sealant. The filter media itself consists of polyester fibers, between which are small granules of activated carbon. Polyester fibers ensure the retention of the carcass base, thereby eliminating the removal of fine coal particles from the filtration layer.

Recommendations for the operation of the FiaS-C charcoal filter

Coal filters for "Folter" extracts are used to remove steam and gaseous pollutants from the air, which are treated with a fine-porous coal structure. In order to ensure the normal operation of the device, a filter of class F7 must be installed in front of it. These may be the Fci or FcS-F models. With the help of such additions, it will be possible to protect the filtering layer from contaminants with aerosols, which reduce the sorption capacity of coal. If the above recommendations are followed during operation, the aerodynamic resistance of the cellular filter will remain almost unchanged.

The field of use of the SUF brand filter

If you are considering air filters "Folter", you should pay attention to the above-mentioned brand, which is a section of the coal filter. The device is designed to purify air from vapor and gaseous pollutants, which can be inorganic, organic and molecular. Among other things, such filters are installed in the exhaust ventilation systems of cafes, kitchens, restaurants and treatment facilities.

General device

The above-mentioned air filters "Folter" consist of a metal casing, which is equipped with flanges at the outlet and inlet. The flanges have openings for connecting the device to the corresponding flanges of the ventilation system. For this, bolts are used, rubber acts as a sealant. The section is equipped with a door through which access to the filtering elements is made, the latter are exposed on U-shaped guides.

Such carbon filters for "Folter" hoods can be equipped with different types of sorbents, here you can include activated carbon with certain properties and characteristics, as well as chemisorbent.

On sale, you can find 2 varieties of described filters: SUF-0 and SUF-2. The last option, unlike the first one, is equipped with an additional filter, which is installed at the air outlet. This is necessary due to the fact that at the initial stage of operation there is a possibility of a small carry-over of fine coal or chemisorbent from the cells. As soon as the door closes, the filter is sealed in the casing, sealing is provided by the seal and the clamps.

Area of use of the filter cartridge FPI

Cartridge filters "Folter" with pulse blowing are used to effectively purify gases or air from all types of dust, here you can include solid aerosols and fine particles. The concentration of foreign elements in the cleaned air should not be more than 10 grams per cubic meter. Before using this device, it is recommended to install a preliminary cleaning degree, represented by the simplest dry dust collector.

Characteristics of cartridge filter

Cartridge filters "Folter" are more effective than hoses, they are able to capture fine-dispersed aerosols that are formed during laser or plasma cutting, welding and other technological processes. In some cases, air purification by this principle can be carried out for the purpose of recycling, which saves heat in the heating season.

Device

The cartridge filter has in the structure a case which is divided into two separate sections, one of which for the cleaned, the other for the polluted air. Among other things, the device has filter elements, a valve section with control solenoids and a cartridge regeneration management system.

Area of use of bag filters of the FRIP brand

The bag filter "Folter" is used for highly effective cleaning of dusty gas or dust air in aspiration exhaust systems of different industries, namely woodworking, metallurgical, construction and chemical industries. It is important to choose the right filter, depending on the tasks that will be put before the equipment. Filters for ventilation "Folter" sleeve type are able to cope with polluted air, which is not toxic, explosive and fire hazardous. You can choose a device of a certain model for catching explosive dust or a filter that is used to clean high-temperature gases (up to 260 degrees).