Rockwool mineral wool: technical specifications, purpose, testimonials. Rockwool Heater

If you want to live in peace and comfort, then, like many others, you try to protect your house from extraneous noise. The accompanying issues here will be the insulation of the building and its protection from the summer heat. Quite often, mineral wool based materials have recently been used as insulation. They allow to solve the above-described tasks. In general, to the category of "mineral wool", according to state standards are products that are classified into several varieties, among them: glass wool, stone wool and slag wool.

For reference

Mineral wool can have a different density, which affects the level of thermal conductivity. This characteristic of this insulation is negligible. However, in the process of operation, the thermal conductivity increases, since moisture penetrates into the structure. In order to make the thermal insulation system more effective, the layer must be protected. Among others, Rockwool mineral wool is on the market. About it and will be discussed below.

Description of the material

Mineral wool from the manufacturer Rockwool is made on the basis of natural basalt, it allows us to use the material for soundproofing and warming of any structures and structures. This includes hospitals and children's institutions. Raw materials in the production process are exposed to high temperatures, resulting in the formation of fibers that are formed by pulling in the thread. For form stability and hydrophobicity, a certain amount of binder is added to the thermal insulation, this makes it possible to obtain fibrous plates that have outstanding operational characteristics.

Appointment

Rockwool mineral wool has found its wide distribution. Producer offers for sale material that allows you to solve many tasks during repair and construction. Thermal insulation helps in creating an acoustic and thermal barrier in the area of:

• Ceilings;
• Walls;
• Overlapping;
• Facades;
  Roofing structures;
• Partitions.

With the help of mineral wool, you can warm steam, saunas and baths. The material has found its application in the isolation of commercial, residential and industrial premises. With its help it is possible to heat insulate equipment, fireplaces, stoves, tanks and piping systems. Rockwool mineral wool can become an effective fire retardant for structures and cable penetrations.

Reviews

The products described are quite competitive, according to consumers, it has many positive features, among which:

• Fire safety;
• Acoustic comfort;
• Ecological compatibility;
• durability;
• Ability to preserve heat.

Mineral cotton wool under the influence of fire will prevent its spread. This sometimes allows you to create suitable conditions for saving people. Fibers can undergo heating up to 1000 ° C. In case of fire, structures covered with mineral wool can become protective.

At extreme heating, the layer of cotton wool does not smoke, nor does it become a source of molten droplets. Rockwool mineral wool, according to buyers, provides acoustic comfort. Plates are capable of absorbing structural, vibrational and other noises. The protective layer copes with these tasks more effectively in comparison with similar materials. This property was achieved thanks to the chaotic interlacing of fibers, between which air cavities are formed, communicating with each other.

Why choose Rockwool?

Mineral wool has been awarded the safety mark EcoMaterialGreen, which indicates the environmental friendliness. Use thermal insulation can be in buildings of any purpose, even for the warming of children's rooms. The products have a positive energy balance. This indicates that the energy saved exceeds the energy costs of production.

Consumers also like longevity. It is provided by a special structure, which guarantees form stability and rigidity. You can not be afraid of deformation of the plates, which do not shrink during the whole life. Buyers especially emphasize that mineral wool copes well with the preservation of heat.

It has a low coefficient of thermal conductivity. The material can be compared to a wall of a bar. The same amount of heat will pass through a 100-mm layer of insulation and a 440-mm layer of timber. These parameters can be compared with brick masonry, the thickness of which reaches 1960 mm.

Specifications

Rockwool mineral wool is a heater that has outstanding technical characteristics. For example, the coefficient of thermal conductivity is equal to the limit from 0.036 to 0.038 W / mK. These parameters are among the best among the heaters of the described class. The most commonly used thickness is 50 mm. Shrinkage does not occur even with prolonged use.

The structure is unique, it assumes a chaotic arrangement of the fibers. This difference can be distinguished by comparing mineral wool with fiberglass - the last filament is almost longitudinal. This quality has a positive effect on rigidity and tear resistance. Fibers interact with each other, so the heater, even with a vertical installation, does not add up under its own weight.

The density of rockwool mineral wool affects the thermal conductivity. The relationship between mass and volume is the reverse. The lower the density, the higher the thermal conductivity. This characteristic is equal to the limit of 35-37 kg / m ³ . In the production process, the material is treated with water-repellent oils, they provide hydrophobicity, which is expressed in the ability not to absorb but repel moisture. This feature can be called unique, because in a moist environment the material does not collapse. Therefore, it can be used even in damp areas.

The "Rockwool" insulation has a rather high vapor permeability, it is 0.25 mg / (m · h · Pa). Thermal insulation lets air and steam through. This gives a positive effect, because the condensate does not accumulate during operation, and the walls breathe freely. A heater is also capable of performing soundproofing functions. The wave, passing through the layer of insulation, fades out, there is an absorption of sound.

Compressibility and bioinertness

The structure of the insulation is unique and has a lot of air pores, so the material is easily compressed - from the original volume, it can change the size by 30%. Fibers have a certain melting point, so the material in the conditions of ignition will be able to protect the structures from fire, hindering the process of pore destruction. The insulation begins to melt at 1000 ° C. The insulator "Rockwool" is also good because it is not able to become a suitable environment for the life of living organisms. This applies not only to bacteria, but also to small rodents.

50mm insulation

Rockwool's 50-mm mineral wool has a strong binder component among the ingredients. The material for the thermal insulation of pipes, roofs and walls is used. It can become a part of building and engineering industrial buildings, office premises and residential buildings. Isolation can be used for internal floors.

The truly exclusive product is the Sandik slabs, which are made especially for private house-building. At the final stage, the cloths are subjected to compression, this saves space during transportation. The material is compressed by 60%.

The thermal conductivity of Rockwool mineral wool is rather low. The edges of such products can spring, so the installation is quick and simple. Water absorption by volume is 1.5%. Transportation of the material is carried out in a vacuum package, so the consumer does not have to transport more air. You will transport only material.

It should be laid horizontally, and it is recommended to use indoor cars for transportation. The described material is made in a standard size, which is 800x600 mm. As an example of a 50 mm slab, you can also consider Light Batts, which is specifically designed for light roofing and lightweight structures.

Reviews of cotton wool "Rockwool Light Batts"

On sale today you can find hydrophobized light insulation boards, which are made on the basis of basalt rocks. This product is unique, and it is meant for private housing construction. The role of the main feature is the revolutionary quality of the fibers, which allow us to subject the compression plates to 70%.

Engineers have long worked on the creation of this material, eventually they managed to get a structure that is capable of preserving outstanding characteristics in all respects. In addition, the material has excellent restorability. Mineral wool "Rockwool Light Batts" has, in the opinion of consumers, many other advantages, among them, it should be noted the ability to compressibility.

The material is springy, thanks to this installation is facilitated, which is true in conjunction with a metal or wooden frame. The springy edge, according to users, is located on the long side, while the width of the edge is 50 mm. Pay attention to the end of the plate, you can see the flexed edge, which is marked.

Reviews and appointment of mineral wool cylinders

Pretty popular among consumers today are heat insulation cylinders made from Rockwool mineral wool. They are manufactured according to specifications and represent the most effective insulation, which has found its application in the protection of cold and hot water supply systems.

As the main raw material for production are basalt rocks. Cylinders are obtained by gluing together a thermal insulation material and aluminum foil. Consumers emphasize that thermal insulation is characterized by a wide range of uses. It can be used to isolate process facilities in various industries, including food.

According to users, the material has a chemical resistance to oils, has effective thermal insulation properties, durability and ease of installation. If you decide to purchase this material, then the price of Rockwool mineral wool should be of interest to you. Buying a cylinder, the thickness of which is 30 mm, per square meter, you pay 68.1 rubles. If the thickness increases to 40 mm, then for the same volume of material will have to pay 74 rubles. This is true if the pipe diameter is 18 mm.

Conclusion

Plates are used for an unloaded thermal insulation layer, in partitions, mansard premises, lightweight coverings, low-rise buildings, interfloor ceilings, including inclined and vertical walls. The material is intended for surfaces that will not be subjected to significant loads during operation.

With the help of insulation, you can ensure its tight abutment to the surface, with no crevices being formed. You will be able to maintain a comfortable temperature with the help of the material, excluding drafts.