Porous brick: application, reviews

Porcelain bricks have high strength and long life. Its density is 3 times lower compared to conventional brick. This allows you to reduce the load on the base of the building and save on the construction process, preventing the possibility of shrinkage at home. Such material has a unique ability to undergo loads that turn out to be a multi-storey house, however, before acquiring this material, you should become more familiar with the characteristics.

In the production of such material, clay, sand, as well as special additives that burn out pretty soon, among them peat or sawdust. In the course of roasting, the burning of organic material takes place, which makes it possible to obtain a ceramic block that has sealed, fine pores.

Scope of use

Porozovanny brick large format used in the construction of public buildings, the height of which does not exceed 24 meters. This material can be used for the production of load-bearing structures, exterior walls of buildings, as well as for the construction of residential buildings with a total number of floors of not more than 9. In the building materials market, today you can find the described products that have excellent characteristics and excellent quality. The porous brick Rauf is widely distributed in the field of construction and is no less popular than the full-bodied brick of the M-150 brand .

Feedback on the main characteristics

Modern consumers choose the described blocks for the reason that they have excellent strengths, low thermal conductivity and environmental safety. Constructions from them are obtained as reliable and durable as possible. Due to the insignificant ability to conduct heat inside buildings, a comfortable microclimate for humans is obtained. According to users, you can count on excellent quality of soundproofing. The resulting masonry allows you to reduce the noise level that comes from the street. Among other things, excellent sound insulation will also be achieved between the rooms. Porosity brick has another significant advantage over other materials, which is expressed in cost savings. After all, the cost of such a product per cube is acceptable and democratic.

The use of porous blocks in the construction of residential buildings

If you use the material described in the article, you can build a house that will be reliable and durable. Products are able to withstand the load, which is 150 kilograms per square centimeter. It is this characteristic that allows building up buildings whose height is equivalent to 9 floors. Thanks to this strength, porous brick can be used in any type of construction.

The manufacturer has ensured that the blocks have the most convenient dimensions, they differ from the usual brick. On sale you can find products of various sizes, the thickness of the walls at the same time will be 250 millimeters. The speed of construction can be compared with the speed that can be achieved with the use of gas blocks. One brigade of builders, even without professional experience, will be able to erect a box of construction using the brick described in one week.

Feedback on mass and heat conductivity

The porous ceramic brick has a negligible weight, its mass is equivalent to 800 kilograms per cubic meter. This indicates that this material can only be compared to aerated concrete, which is used in the construction of low-rise buildings. Insignificant density can reduce the pressure on the foundation, this allows you to erect a house on the ground of almost any kind. If you want to build a house from porous bricks, then you should pay attention to consumer feedback on the thermal conductivity.

According to buyers, due to the low ability to conduct heat, this material is one of the best among analog. A similar thermal conductivity is inherent only in aerated concrete. Walls are obtained in addition insulated and do not need thermal insulation. In order to comply with the norms on energy conservation, buyers are advised to erect walls, the thickness of which is 40 centimeters.

Resistance to external influences

Buildings that were built from the described material are not at all afraid of the weather conditions, as well as the effects of atmospheric precipitation. Blocks are able to withstand the same number of cycles of defrosting and freezing, as well as ordinary brick. Among other things, the porous material is inert in terms of biological parameters, which is why no mold or fungus is formed on its surface. Exceptions are putrefactive processes. Building porous brick is able to create a favorable microclimate inside the building, which is facilitated by the pores with which the building blocks are covered. With this circumstance, the natural moisture inside the house is corrected.

Experts argue that such buildings can be compared with those that are built of aerated concrete or wood. The buildings have excellent sanitary and hygienic characteristics.

Reviews about fire safety

The porous hollow bricks are also used by consumers for the reason that it is fire resistant. This material can be compared with clay or silicate brick, which not only does not burn, but is also able to undergo the effect of open fire for several hours, it is this characteristic that consumers pay attention most often. This is especially true for future owners of private country houses.

Versatile application

Double porous brick is used not only for exterior, but also for interior decoration of buildings, there are no restrictions. Finishing works you can make using a variety of materials. House of such blocks do not need to be painted from the outside, as you can buy products in different colors.

Negative feedback

Despite all the positive advantages, some consumers refuse to use such products because they may have a higher cost compared to analog products. However, more far-sighted consumers point out that with the use of such material, it is possible to save on external finishing, which sometimes results in a very impressive amount. When using such products, you can not limit yourself in the number of storeys of the future house. Whereas if we compare with buildings built from silicate bricks, the cost of building out of the porous blocks will be compensated for by the less impressive volume of the necessary material.

As mentioned, the cost though is acceptable, but it is 3 times higher than lightweight concrete.

Efficiency of application

A porous brick, the construction of which can be produced independently, can prove to be more effective than it seems. Thus, when using sand-lime bricks or ordinary foam concrete, heat losses occur through the seams. If porous products are used, it is possible to reduce such losses, which is achieved by using not ordinary mortar, but specialty glues. In this case, the masonry will have a thickness of the seam, which is 2 millimeters or less, thus minimizing the cold bridges.

Among the features of the work, it should be noted that the masonry is carried out without using a mixture to form vertical seams, which are connected as tightly as possible thanks to the groove-comb system. If you want to compare the cost of a porous product with that used for finishing external walls, it is necessary to get acquainted with the information that the facing brick, whose price is 11 rubles, is cheaper in comparison with the described one, the cost of the last one is 20 rubles. For residents of areas where the harsh winter and hot summer, it is especially important how many cycles of freezing and defrosting bricks will last. Manufacturers argue that products are capable of undergoing up to 100 such cycles.

What is important to know before purchasing a material

Construction is a fairly responsible process. In order for labor to be fast and qualitative, it is necessary to calculate the volume of the material correctly. The thickness of the wall will affect the calculated values. Thus, if you want to get a wall with a thickness of 120 millimeters, you should make a masonry in half of the brick. For wall thickness of 250 millimeters, lay out the products in one brick. 380 millimeters will be obtained if you stack blocks of one and a half bricks. 510 millimeters it will be possible to receive at a laying in 2 bricks. And for a thickness of 640 meters it is necessary to produce a masonry in two and a half bricks.

Conclusion

The facing brick, the price of which was mentioned above, can be purchased as a porous product. You should remember that it will be possible to reduce the cost of construction if you carry out all the work yourself. Otherwise, you have to pay the workers, the architect, and also the foreman. Here it is worth adding transport costs that will go to deliver the material to the construction site. But this is not the entire list of expenses that you may encounter when building a house on your site.