Plow for winch with own hands: drawings. How to make a plow for a winch yourself?

If you need to make a plow for a winch yourself, the drawings of this tool must first be considered.

Features of the plow for the winch

It is worthwhile to understand before starting the work that as a working element of the plow is a share that cuts the bottom of the bottom of the soil. Among other elements there is also a dump, which is designed for crumbling and wrapping the earth. Used in the design and the field board, which acts as a support tool. It rests on the bottom of the furrow. Field board, blade, fur, and also the stand with which the plow element is fixed, constitute the body of the structure. In the ground the body moves in the direction of the horizon, cutting the soil, and after deforming it and turning it over.

Features of the plow

A plow for a winch with its own hands, whose drawings must be made independently, can be performed only after you have studied the principle of the tool. Before this, you need to make sure that you are able to work with metal, you will have to bend the blade by using the sheet bending rollers. You can choose for yourself one of the proposed options for manufacturing the blade of the hull.

Features of the body

When a plow for a winch is made by hand, the drawings of which allow to complete the work without errors, it will be necessary to form the hull, taking into account that the layer of the earth should rise 25 centimeters up. This indicates that the tool will experience significant loads. In addition, the surface of the body will be subjected to abrasive wear, this entails the need to use for the manufacture of working elements of a steel structure, the thickness of which is 5 millimeters.

Features of the share

The ploughshare must be removable so that it can be sharpened. The manufacture of this element must be carried out using alloy steel, this may be a circular saw blade. You can use steel that has not been hardened. If there is only carbon steel of normal quality that has not been heat treated, it can also be used, but before use, the cutting edge of the coulter will need to be repelled with an anvil in the cold state. After the element should be sharpened.

Blade manufacturing technology

When you make a plow for a winch with your own hands, the drawings of which allow you to complete the work more simply, you need to prepare the sheet bending rollers. They will allow to give the workpiece the necessary form. For what the blank preparation, the thickness of which is 4 millimeters, it is necessary to bring to the rollers at an angle of 23 degrees. The element must be bent, and then brought to the desired shape with a hammer.

The second variant of manufacturing

Initially, you need to prepare the plow drawings for the winch yourself. Only then you can start making a dump, which can be made of a steel pipe, its diameter should be equal to 600 millimeters, while the thickness of the walls should vary within 45 millimeters. In this case, initially from a fairly dense cardboard you need to perform a template element, and then apply it to the pipe, so between the bottom of the blade and the tube cylinder should get an angle of 23 degrees. The contour of the element should be marked with chalk, and after cutting the oval with the help of gas welding, then the workpiece is processed on the emery. If necessary, the form can be modified with a hammer.

The third variant of manufacturing

Preliminary it is necessary to make drawings of the plow for the winch with your own hands. The third variant of manufacturing will be the most labor-consuming. The blank for the blade should be heated using a furnace. After that, the part must be arched on the matrix, as the last one you can use a blade, borrowed from the tractor plow. The plow body must be made of sheet steel, the thickness of which is 3 millimeters.

Recommendations for specialists

Making a plow for a winch with your own hands, drawings, a photo of which you should study in advance, you can pre-make structural elements using a cardboard, after the patterns are glued together. If the layout of the structure satisfies you, you can use it as a basis for making the tool. When the main plow blanks are prepared, a steel sheet with a thickness of 3 millimeters should be used to mount the body, whereas the dimensions of this blank are 500 x 500 millimeters. Using a steel sheet, from its edges it is necessary to retreat 40 millimeters. On the metal sheet, you need to install the shaving rod and fix it with welding on both sides. Next, you need to put a shield under the shingle, given that its location should be vertical, in addition, it must go beyond the edges of the share to 8 millimeters. The rack guard in this case should be located above the blade of the share for 10 millimeters, only this way it will be possible to exclude the fact that it will interfere with the blade. The shield must also be welded to the steel sheet and ploughshare.

Connecting Elements

Making a plow for a winch with your own hands, how to make a tool, you must learn in advance. At the next stage, you need to try on a plow, which should be connected to this element fairly tightly, there should not be any gaps. The angle between the blade of the share and the edge of the blade should be approximately 8 degrees. If a discrepancy between the angles was found, the blade should be modified with a hammer. After the blade is fitted to the couch, it must be seized with welding. At the next stage, the spacer plate is strengthened to this shield, as well as the base plate. The latter should be strengthened to the support corners. The tool needs to be inspected and finally welded all the elements. Supporting corners of the share must be welded to the base plate.

Final work

Performing the plow for the winch with your own hands, the next step is to clean the seams well, and cut the shovel and the blade with a grinding skins. In order to ensure the self-propulsion of the plow, it is necessary to adapt to it a block that has two wheels.

Features of making wheels

The furrow wheel should be selected in such a way that it has a diameter of 320 millimeters, while its width should be equivalent to 50 millimeters. It can be made from a sheet of metal, the thickness of which is 4 millimeters. After making the plow with your own hands for the winch succeeded, you will also need to make a field wheel whose diameter is 200 millimeters, while its width should be equivalent to the width of the base wheel. Manufacture must be made of the same material. The wheel axle is formed from a 3/4-inch pipe. After carrying out these works, you can safely start using the tool. As its positive feature, it can be noted that if you break it, you can easily repair it, as you will know its device well.