Pile-foundation foundation for a wooden house with your own hands: reviews

If you decide to build a pile-and- foundation foundation for a wooden house, it is necessary first to get acquainted with the comments left by the home masters and professionals involved in carrying out such work. Such a construction is a support on which the load from the entire structure is assigned. In this case, piles or screw products are used as piles. Grillage, in turn, performs the function of dislocation load from the building. Formation grillage is carried out with the help of beams or slabs, which are formed in a single system.

Usage feedback

The pile-foundation foundation under the wooden house can be erected on the territory, the soil of which is problematic. This mainly applies to clay soils. The base, formed using piles, allows a significant load to be transferred to hard rocks that are located deeper than the top layer. It should be noted that this type of foundation can also be built on favorable, ordinary soils.

Modern masters resort to the construction of pile-and-mortar foundation for the reason that such a system has a high load-bearing capacity. Among other things, private developers say that they are attracted by the economy, which can be achieved due to a small amount of excavation. Reading reviews, it is worth highlighting that the masters use this foundation when it is necessary to build wooden buildings, as well as structures of frame and shield type.

Reviews about materials piles

The pile-foundation foundation for a wooden house can be built using different materials. Each of them is characterized by its quality characteristics and duration of operation. Some consumers choose wooden supports, while other buyers most often prefer metal or reinforced concrete products. It is worth noting that the wooden piles of the master are chosen in the event that they will be rendered an insignificant load. Preference for this is followed by coniferous wood, the most suitable pine.

The pile-foundation foundation under the wooden house can be erected with the help of reinforced concrete pylons. They are most in demand today and represent hollow pillars, which can have a square or circular cross-section. Metal supports, as practice shows, need additional processing with special compounds that can prevent corrosion processes. Wooden supports, according to consumers, are the most short-lived. After a while they begin to smolder in the ground.

Reviews of the pros of the pile foundation

If you decide to use the pile-foundation foundation for the construction of a wooden house, it is initially recommended that you familiarize yourself with the positive and negative aspects of this type of foundation. Most often, the owners of houses that were built for this technology, note that the uniqueness of the design is that it can be formed on different soils. However, it is worth abandoning the work if there is magmatic soil or sediment in the area. Many residents are attracted by the fact that construction takes very little time. Then you can start work even in the cold season. Future owners note that their choice was influenced by the excellent bearing capacity of the base. If you compare with the ribbon foundation, then the described type of construction is much cheaper.

Tips for the home master

The pile-and-foundation foundation, which you can read about in the article, can be easily built independently. For this it will only be necessary to screw the supports into the soil for a certain distance. After using the Bulgarian, you should cut the piles in such a way that they are at the same level.

Reviews of the minuses

Before the start of construction, you must be familiar with the disadvantages of the foundation. Among them, modern consumers note the impossibility of carrying out manipulations without the use of special equipment and tools. This increases the cost of work. If there is a rocky ground in the development area and there is a layer of limestone and stones that differs in hardness, it will be impossible to form a pile foundation with a grillage .

A number of professional builders refuse from this type of foundation for the reason that under it it is impossible to lay a warmed basement room. At the first stage, it is rather difficult to make calculations, which is why you will have to entrust conducting these works to professionals. The pile-foundation foundation, the shortcomings of which are described in the article, can not be analyzed after the supports are pushed into the ground. This excludes the possibility of detecting damage.

Technology of erection

The pile- foundation foundation with its own hands can be erected according to a certain scheme. To begin with, it is necessary to form wells using a manual drill. At the next stage, a formwork is installed, the upper edge of which must be slightly above the ground surface. The material should be raised by 300 millimeters. Further, pipes are formed from ruberoid, the diameter of which should be equal to the dimensions of the well. Then how to damp these elements is necessary at 300 millimeters lower in comparison with the pits themselves. After the resulting formwork is reinforced, for which it is possible to use metal rods. The next step will be pouring the concrete mixture.

Conclusion

You can perform grillage using an iron or concrete beam. To do this, between the pillars should dig a trench, the depth of which should be equal to 30 cm. After sand is poured, covers the roofing material, and also the formwork is installed. In the formed space is poured concrete.