Pattern of a swimsuit for beginners

If you are engaged in rhythmic gymnastics, then you will definitely need a gymnastic swimsuit. This is an important thing both for training in the hall, and for demonstration performances at competitions. For classes in the section you will need the most common model, which is easy to find in a special store. But the purchase of clothing for performances for many becomes just a nightmare. To avoid this, you can find swimsuit patterns, choose what you like and sew it yourself.

If you decide to start sewing a gymnastic swimsuit, then you need to do this: centimeter tape, pattern, knitwear, sewing machine with overlock function, needle and nylon thread.

Check that everything was at hand: Whatman, which will be used to build a swimsuit pattern, knitwear and threads, which are best to take with lycra, which will ensure the product elasticity. Acquire a needle with a blunt tip - such a needle does not pierce, but pushes the tissue apart.

It is desirable to have one product for training, and another for performances.

To pattern swimsuit was correct, you should correctly remove the measurements from the person who is sewing the kit. Centimeter measure the circumference of the waist and chest, the length of the back, the transmission and the sleeves.

Next you need to take a sheet of Whatman, on which the pattern of the gymnastic swimsuit will be located, and make a sketch. From the front and back should be outlined panties and slightly increase the lateral notches on the hips, so it was convenient to move.

Then you can rasporot old t-shirt, suitable in size, which tightens the body, attach it from below to the obtained pattern of panties and outline. The sleeves need to be made longer at the seams.

The pattern of the swimsuit is cut from the Whatman paper. Knitwear should be spread out on the table, attach a pattern to it and make a part of the future swimwear out of the material in such a way that approximately one and a half to two centimeters remain on each side of the sword. Be sure to carry out fitting at every stage of sewing.

Then it is necessary to sweep the future swimsuit, in front and behind note the cutout under the neck, it should be deeper than on the T-shirt. It must be remembered that you should leave the allowance for the seam.

From knitwear should be cut out strips, the width of which will be about five centimeters. A special knitting needle needs to stitch the side seam, then sweep it, similarly do with the shoulder and bottom seam, and then stitch the sleeves.

The cut of the neckline should be done as follows: take a strip of cloth cut from the knitted fabric and attach it to our neckline, then wrap the strip on the wrong side, tuck it and sweep it towards the swimsuit. Then attach from the front.

Panties gymnastic leotard, as a rule, hone. The allowances are tucked and stowed right along the edge. Quite often swimsuits are done with a small skirt.

The pattern of the swimsuit is simple. The finished product can be applied and embroidered with paillettes.