Origami ship: different ways of making

Create a ship-origami can be in many ways even a beginner in this matter. The finished product will go to the collection of children's toys or, if the model is complex and unusual, on the shelf to souvenirs.

A simple model

A classic ship-origami, whose scheme is probably familiar to each of the children, is done in a couple of minutes. What to do for those who forgot:

1. Sheet A4 fold in half twice.
2. Decline. To the fold line, wrap the top two corners.
3. At the bottom there are two free edges, bend them up in the opposite directions.
4. Bend the protruding triangles.
5. Fold the triangle into a diamond, the lower corner of which should be open.
6. Free corners bend in opposite sides upward. Again, we have a triangle, turn it into a diamond, like in step 5.
7. Lower corners bend upward and return to the previous position.
8. Gently pull the upper corners to the sides to open the boat.

It turned out to be a simple boat!

Motor ship

To get such a ship-origami, you need:

1. Angle A4 sheet bend to the opposite side, cut off excess. Should get a square.
2. Bend the square two times in half, then return to its previous position. This was necessary to create fold lines.
3. The top corner is bent to the center of the square, then, having receded 2 centimeters from the folding point, bend it upward and, having retreated 3.5 centimeters, bend downwards.
4. Leave the entire sheet in half.
5. Now bend the bottom of the boat, as shown in the diagram.
6. It remains to draw the windows.

The boat turned out.

Sailboat

How to make origami-ship-sailboat:

1. Take the A4 sheet, bend the corner to the opposite side and cut off the excess. The result was a square.
2. Fold in half and return to its previous position.
3. All four corners bend to the center.
4. One of the corners bend back, retreating about a centimeter. Do the same with the opposite angle, just back a little more.
5. Fold the sheet in half in half. Both sides bend to the center.
6. Lower the angle in any direction.

The sailing vessel is ready!

Yacht

How to make a yacht out of paper:

1. Angle A4 sheet bend to the opposite side, cut off excess. The result was a square.
2. Bend it diagonally.
3. One corner, bend to the fold line.
4. Bend the bottom upward.

This simple ship-origami can make even a child.

Dog in the boat

To make an origami ship from paper with a dog, you need:

1. From A4 sheet make a square.
2. Bend it twice in half, once unfold. It was a triangle.
3. At an angle of about 60 degrees from the fold line, bend one edge.
4. Rotate so that there is a triangle at the top.
5. Bend the protruding triangle down, and then a small part of it to bend inward. The muzzle has turned out.
6. To bend the ears.
7. Colorize the dog.

Two-Tube Ship

Progress:

1. From sheet A4 make a square and fold it twice in half. Unfold.
2. All corners bend to the center.
3. Turn over the sheet. Again, bend the corners to the center and turn them over again.
4. Repeat the third step.
5. Two diamonds lie in a square.
6. Fold the entire sheet in half.
7. Turn out the edges.

Modular origami

Do you know what modular origami is? The ship in this case you will get it easily. For the rest, a detailed scheme for assembling the modules:

1. Cut A4 sheet into 4 parts. To do this, bend it two times in half and unfold.
2. Take one of the resulting triangles and bend it in half.
3. The upper corners bend to the center.
4. Turn the sheet over, fold out the protruding edges. And the protruding triangles bend inward between the triangular base and the rectangle.
5. Fold in half.

The essence of modular origami lies in the fact that, by combining different such details, get a three-dimensional shape.

Assembling the deck

To get an origami ship from the modules, you need a little less than 1000 pieces of white, green, yellow and pink colors (colors can be changed to your liking). What do we have to do:

1. For the first row, make 40 modules of green color and lay them out in a circle. Make the same amount of white paper and create a second row.
2. On the two opposite edges must be the forage and the nose of the ship. In these places, starting with the third row, add two pink color modules. There are 44 parts in a row.
3. In the fourth row there are 44 white modules.
4. On the fifth row, again add two modules for the stern and nose. There should be 48 yellow details in all.
5. From the sixth to the 12th row, alternate white and colored modules. 48 per each row.
6. In the thirteenth row there should be 36 modules. A number of reports are not fully on the site of the ship's nose. Insert parts is backwards in comparison with how it was done in other rows.

The nose and sail of the ship

How to collect the nose:

1. The thirteenth row, report using 16 modules of different colors (choose a pattern yourself), two of them need to be added to the center.
2. The fourteenth row consists of 14 modules.
3. Fifteenth and sixteenth series of 11 modules.
4. In the seventeenth row 12 modules, then start to reduce by one detail with each row. So, the nose should end on the twentieth.
5. On the edge of the nose, put the modules green, should get 40 parts.

How to collect a sail:

1. The first row of 13 modules, then up to the sixth row increase by one piece.
2. In the seventh row there are 15 modules, in the eighth - 16, in the ninth - again 15. This alternation continues until the nineteenth series.
3. In the twentieth row there are 12 modules.
4. In the twenty-first - 13.
5. In the twenty-second -12.
6. In the twenty-third - 11.
7. In the twenty-fourth - 12.
8. In the twenty-fifth - 11.
9. In the twenty sixth - 10.
10. Collect them together backwards.
11. Sheet of cardboard roll into a tube and secure the edge with glue. The mast turned out.
12. Make a bend in the sail and glue it to the mast.
13. Place contact areas of the sail and the ship with glue.
14. Make a flag of five modules and glue it to the mast.

Having learned how to make an origami ship from paper, you will always know what to entice a child. Prepare markers and pencils to create a unique design for your crafts.