Openwork scarf with knitting needles: a knitting pattern. Openwork pattern with knitting needles for scarf

One of the simplest in the execution of products is an openwork scarf with knitting needles. The knitting pattern will be clear even for beginners. In addition to the pattern, it is necessary to take into account several important nuances: selection of yarn and knitting needles, knitting density, combination with clothes of the finished product.

How to choose a yarn

The right choice of material for making a knitted product is extremely important. The appearance and quality of the thing depends on the texture and thickness of the thread.

Some recommendations on the choice of yarn:

• An intricate and complex technical pattern must be clearly visible. Therefore, it is undesirable to take a melange yarn, since in a multi-colored motley article the pattern is lost.
• Synthetic thread is much less prone to wear, the thing will long retain a good appearance. However, products made of artificial materials are not very pleasant to the body, poorly retain heat and are highly electrified.
• Things made of natural materials, such as wool or cotton, are pleasant to the touch, do not accumulate static electricity, but, unlike synthetics, shrink after washing and wear out more quickly.
• Those who prefer only natural yarn, the advantage should be given to camel or merino wool.
• High quality yarn is usually uniform, uniform, pleasant to the touch and elastic.

It remains to choose an openwork pattern with knitting needles. For a scarf, any beautiful and refined rapports will suit. It is advisable to choose not very thick threads, otherwise the complex pattern will be concealed and lost on the general background.

How to choose knitting needles

The quality of the thing depends on the correct choice of the working tool. If the spokes are thinner than necessary for a given thread, the fabric will turn out too dense. If the spokes are thicker than expected, then the product will be too loose and loose.

Tips for choosing spokes:

• Look at the label for the yarn. As a rule, it indicates not only the composition of fibers and the thickness of the thread, but also the supposed number of spokes or hooks.
• Bind several samples with spokes of different diameters. Choose the best option.
• For those who do not have free time for tying out several samples, there is another way. The two folded thread is twisted slightly and matched with the knitting needle. The diameter of the twisted filament should correspond to its diameter.

Density of knitting

The density and quality of the web depend on many factors: the thickness of the thread, the number of the spokes, the composition of the yarn, the pattern, and also the degree of tension of the thread during work. Before proceeding with the basic work, it is desirable to calculate the density. This is done according to a simple formula. To begin with, you need to tie a small fragment, about 12 by 12 cm in size. After that, the finished sample must be evaporated with an iron through wet matter. Products made of cotton or wool yarn can shrink. Further work should be carried out taking into account this factor.

To the finished sample, you need to attach a ruler, measure 10 cm and mark the thread with a contrasting color. Then calculate how many loops in ten centimeters, the divided amount divided by 10. This number is multiplied by the width of the product in centimeters. That is, if 10 loops were 20 loops, and the width of the scarf should be 35 cm, the following formula is obtained: 20/10 _* 35 = 70. Starting knitting should be typed 70 loops and add two edge.

Patterns and patterns

It is undesirable for beginners to undertake immediately for technically complex patterns. To begin with, you can create an openwork scarf with knitting needles, the knitting pattern of which involves repeating one sequence of simple actions every 2-4 rows. This will not get confused with the account.

How to knit openwork scarves with knitting needles? Schemes, photos and a description of the work is given below.

1. This drawing is not very complicated, but it requires care and accuracy.

The number of loops in this case should be a multiple of eight (plus two edge).

Work process and tips for reading the schema:

The scheme is read as follows: front rows - right to left, purl - on the contrary. One cell corresponds to one loop. The first row and all the odd numbers should be bound with a purl. In this scheme, there are no separate symbols for the purl series.

Legend:

- an empty cell in the front row means the front loop;

Two together face;

- / - simplified version - to tie two together face; A complex version assumes the need to transfer one loop through the other using the left spoke;

0 - CAP.

The diagram shows the sequence of necessary actions very clearly. After 10 rows are completed, it is necessary to repeat the entire sequence from the first row. This pattern can be used to create things such as a stole, a shawl or an openwork scarf with knitting needles. The knitting pattern is quite simple and understandable.

2. The repeat of this pattern (i.e. the repeating part) is 4 rows. This means that the sequence of actions in the first row will begin to repeat from the fifth row. Remember the flow chart is easy.

Progress:

1 row: odd numbers to knit by purl;

2 rows: 2 facial, 1 cape, then tie 3 facial strings, after which the first of these to grab with the left needle and transfer through the second and third loops; Repeat the action, starting with the crochet.

4 rows: 1 facial, 3 facial (the first of which is then thrown through the second and third), the cape; Repeat the sequence of actions, starting with the crochet;

6 series is similar to the second.

In order for the knitting process to proceed successfully, the density should be average. If the tension force of the thread is excessive, the transfer of the loop will cause difficulties. And with free knitting the canvas will turn out to be sloppy and loose. Therefore, those needlewomen who have not yet adjusted knitting density, it is better to choose such openwork scarves with spokes, the schemes of which will help to concentrate on the quality of work, and not on a complex sequence of actions.

Some useful tips for beginners

Simple recommendations will help to execute the first product even, neat and beautiful.

• To the bottom of the product was smooth and not twisted, the first two rows can be tied with an elastic band 1 to 1 or 2 to 2. They are very simple, by alternating the front and back loops.
• It should be remembered that the first edge (or edge) loop at the beginning of each row is not tied, but simply removed on the spoke. The latter is sewn on the wrong side.
• The fastening of the last row can be done with the help of spokes or hooks.
• For those who first knits an openwork scarf with knitting needles, the knitting pattern should be simple in execution.

How and with what to wear an openwork scarf

There are things that remain out of fashion and time, despite the constantly changing trends in the beauty industry. A knitted scarf is a vivid example of one of the things that have not gone out of fashion for many years.

There are many ideas: a knitted scarf looks great with both a coat and warm sweaters, and with dresses, blouses or suits. Fantasy and a sense of style will help to choose the right accessories for clothes. For girls who prefer a romantic style, wonderful open-work scarves with knitting needles, the schemes of which depict an exquisite and subtle pattern. For everyday style simple simple models are suitable. And for fans of extravagant things, you can pick up something unusual. For example, a scarf tied with ribbons.

It may seem difficult for beginner knitters to create things like knitted cardigans, dresses or jackets. Therefore knitting openwork scarves with knitting needles is a good way to acquire skill in this kind of needlework, while creating exclusive things.