Openwork hooks: diagram and description. Openwork summer crochet

He takes as a headdress appeared in the 15th century. Originally it was rectangular in shape, worn exclusively by churchmen. In the 16th century, European citizens could wear a headdress made of velvet, corduroy, silk, decorated with precious stones and embroidery.

Now this model is in great demand among women, men, children. Let's consider in more detail how to tie the summer openwork with a hook. The scheme and description of the models will be chosen for the beginners.

A bit of the history of beret

At many at a mention of the given headdress there is an image of the Soviet beret of the round form with a tail on a vertex. Now well-known fashion designers (Giorgio Armani, Agnes, Oscar de la Renta) offer a wide range of berets, suitable for shape, material, color to wear in any season.

Wear this headdress in different ways: tilt sideways, pull on the ears, slide back, hide the hair under it or, conversely, straighten it. It all depends on the type of person, the time of the year, the type of beret.

Now fashion designers create berets in the form of caps, caps, models "tablets", "transformers". Knitted headdresses are especially popular, as in our time the masters form unusual patterns (three-dimensional, openwork), through which this or that image is created.

Beginners should pay attention to the openwork hooks. The scheme and description of such a model are fairly simple and do not require extensive experience. The simplest option is the creation of a net beret. You can go on the path of knitting caps from arches with air loops. Side of the mesh cap decorate a huge flower. A model in the form of a "sack" you knit from a rubber band, then alternate the folding posts and air loops.

Simple and original beret

Knitting requires cotton yarn (in 50 grams 240 meters), two hooks - the first and fourth numbers. Changing the numbers of hooks, get a tight or loose pattern. You knit a fishnet summer with a crochet starting from the center of the circle.

1. Close the ring six air loops.
2. Each row starts with three lifting loops. You send nineteen columns with a crochet (CCP).
3. Then alternate 2CHN and three air loops. There should be ten pairs of "folding" posts.
4. The next row you knit similarly, only between two nakidnymi columns you type five loops.
5. Now pair the bars (there are 2CNN type) you sew over the similar elements of the previous row, and on the arch of the five loops form the following pattern: * 2 loops, ICS * - repeat twice, 2 loops.
6. Paired posts are tying unchanged, and in the arched pattern you type three air loops, 3SNN, three loops.
7. The next row is tied in almost the same way as the previous one, but instead of 3 CLS you are tying a slingshot (2NSN in one base), 1SSN, slingshot.

Flower formation

We continue to knit the fishnet hooks. Schematic description of the headgear from the 7th to the 13th series:

1. Now, in an arched pattern, the air loops around the edges are reduced to two, and the number of slingshots is doubled (2 slingshots, SSN, 2 slingshots).
2. You send four air hinges, 7SNN in an arched pattern, and the paired columns go unchanged.
3. Next, in the pattern, increase the loop to six, and reduce the number of columns to five.
4. You have five loops and 3SNN. In the pair STS of the previous row, you are tying two pairs of "nakidnye" columns with an arch of five loops between them. It is from these columns that the formation of a sharp petal will begin.
5. Then paired posts are tied with two arches of five loops, and in an arched pattern you type five loops around the edges and a folding post between them.
6. In an arched pattern, you sew five loops, and between the pairs of pillars (petals) make three arches out of five loops.
7. The next row is knit almost the same, only in the arched pattern you type three loops, and between the pairs of posts you knit four arches out of five loops.

Formation of the second petals

We continue to create a delicate beret for the summer. Scheme from the 14th to the 19th series:

1. Now each arched pattern (petal) ends with two CLS, and between them you type five arches out of 5 loops.
2. Next, from the paired SSN of the previous row (the point of the petal) you are tying 6SSN with 3 loops between them. Between these elements, you collect 4 arches from five loops, which begin to form the second row of petals.
3. Now in the petals form three arches from the five loops, and between the leaves over the 3rd CTH of the previous row, you fasten the slingshot, ICSN, two arches from the five loops, the ICSN, the slingshot.
4. In the next two rows, the elements of the slingshots and bars remain unchanged. The number of arches changes. In the 17th row between the slingshots add two arches, and in the leaves - three similar elements. In the 18th row, on the contrary, the pattern contains two arches, and between the slingshots - three arches.
5. Over the slingshots of the previous series you are tying 7SNN. Between leaves you make five arches out of five loops.

End of knitting of a headdress

Finish knit summer openwork beret crochet. Scheme and description from the 20th to the 30th series:

1. The next row consists of six arches between the leaves, five outstretched columns in the pattern.
2. Next, you sew seven arches and three columns with a crochet that form the top of the leaf.
3. Now you are tying six rows completely with arches out of five loops.
4. From the 28th row, go to the formation of gum. You wire each arch with a connecting loop.
5. Then knit the connecting posts, subtracting two elements after every five loops.
6. The last row is the same as the 29th. If you want an elastic band more, then you will tie the required number of rows without decreasing.

As you can see, the aerial beret has turned out. Its advantage lies in whole knitting. Experimenting with the color gamut of threads, you can get vivid images. Especially pay attention to the melange yarn, the color of which smoothly passes from one shade to another.

Beautiful openwork hooks: diagram and description

"Flower" beret can be tied otherwise. First, make a separate motif, and then tie the base of the headdress to its petals. For work, use cotton, thin hook (№1,4). The flower arrangement consists of 13 rows.

1. Close the chain of ten air loops.
2. In the first row you sew 20 CLS.
3. Then alternate CCH and air loop.
4. Then each column is tied over the similar element of the previous row, and between them knit three loops.
5. From the fourth row, form petals. From the first to the third column you sew an arch of eight loops.
6. In each arch you feed a petal: polustolbik, ISSN, three columns with two nakidami, five columns with 3 nakidami, three columns with two nakidami, 1SNN, polostolbik.

Please note that the flower motif can be connected by different threads or one color. The main thing - remember the combination of colors. Especially elegant looks openwork white beret crochet.

Knitting the basis of a flower beret

Scheme of the headdress from 6th to 22nd row:

1. The next row starts from the middle of the petal to the third column with the three cusps of the next sheet. You collect arches on nine loops.
2. In each arch you are tying 18 pillars with one overhang.
3. From the eighth row you knit "sheaves" (three "mantles" with one vertex and different bases) with three loops between them. Only between the petals "sheaves" go without air loops.
4. The next series begins with the middle of the arch of the three loops of the previous series.
5. Now in each arch of the bottom row you are tying on 3SNN (for each petal there are 12 elements each).
6. The remaining two rows follow a similar pattern.
7. Next, he takes a knitting pattern from the 8th to the 13th row, that is, you start with "sheaves" and end up with columns with crochet.
8. Approximately in the 18-19 series you start decreasing in each 8-9th loop.
9. In the 20th row you alternate the CCN and the loop.
10. The last two rows are knitted with columns without a crochet, reducing the required number of loops.

Unusual openwork hooks with a diagram and description

Due to modern models berets can be worn by women and men with any type of face. Hats with a stand are especially interesting. Some of them are starchy, others are connected with a regil or a rigid fishing line, and others are created in parts. Let us consider in more detail how the beret is created by the latter method.

Knitting patterns with a description of the bottom.

1. Close the chain of eight loops.
2. The row is completely made up of nakidnyh columns (one 9 petals of the pillars).
3. On the 9 columns of the previous row you are tying * "Sheaf", an arch of five loops * - 2 times, "Sheaf".
4. The next three rows are tying in the arches of the previous row: 3СНН, two loops, 3СНН. Between the elements of the air loops do not bet.
5. Then add another element. It turns out that on the 9 columns of the first row there will be three "fans": 3SN, two loops, 3SN.
6. The next row is knitted unchanged.
7. Next, in each fan of the previous series, you are tying the triple element: * 3СНН, 2 loops * - 2 times, 3СНН.
8. In the next row on the arches are tying ordinary fans.
9. In the last row alternate the triple fan with the usual one.

Connecting parts

Beret can be two-color or monophonic. In the second variant, choose a bright color scheme. For example, a catchy look on young girls is the summer openwork orange crochet.

Knitting scheme for the lateral part of the headdress.

1. You type a chain that is equal to the circumference of the head, adding another seven centimeters.
2. Weave all the rows with double slingshots (2CCN, two air loops, 2SSN) with one base.
3. The next slingshot goes through two loops of the lower row.
4. Elements go strictly one after another.
5. In the 3-4th row between the slingshots, you sew one air loop.
6. In the 5th-6th row, increase the arches to two loops.

Once the parts are ready, put the bottom on the side, using the arches of the six loops join them. Then knit ruches according to the following pattern:

• Type arches from six loops;
• In each arch you are tying half-hulk, 7SSN, polostolbik.

Then go to the band. You knit it with columns without a crochet, and "holes" are created due to alternation of three CCN and two loops. After three centimeters, you sew a "pico" (three air loops into one base). Beret is ready, you can decorate it with a flower.