Oil Change in Automatic Transmission on Toyota

Every car enthusiast knows that the normal performance of the automatic transmission of any car depends on the level of ATP. For some brands of cars, this indicator is checked against specific features.

If the oil level in the automatic transmission is low, in this case the pump, together with the oil, seizes the air. As a result, an emulsion with low heat capacity and thermal conductivity appears. As a result, the oil is compressed, the pressure is lowered, the heat is poor, and the automatic transmission quickly fails.

Oil change in automatic transmission

To perform a complete oil change in the automatic transmission, it is necessary:

1. Find a garage with a pit or overpass.
2. The keys are 10 and 14. You can use the heads or tubes.
3. The right amount of oil. When choosing this fluid, you should take into account the marking of the automatic transmission. Oil change in the gearbox is also carried out on the basis of the car brand and the installed gearbox.
4. New oil filter and gasket tray automatic transmission.
5. The funnel, which fits into the dipstick of the automatic transmission.
6. Pliers for clamping on the hose.
7. Several bottles to measure the fused oil.
8. A container for draining off work and dirty gasoline.
9. 1-2 liters of gasoline.

Change of oil in automatic transmission of the car of mark Toyota

To replace this fluid, you will need to do the following:

• Go to the overpass.
• Climb under the car.
• Find the drain plug in the automatic transmission tray.
• Unscrew the plug with a head by 14. Before doing this, place the measuring container under the plug. You can also drain the oil into waste containers, in order to detect the amount of the drained liquid. This is necessary to avoid overflow or oil overflow.
• Remove the protection and unscrew the drain plug.
• Disconnect the outlet hose from the cooling radiator, draining the oil from there.
• Connect the hose to the radiator for pumping out the liquid. This procedure lasts approximately 15 minutes.
• After that the oil change in the automatic transmission is continued. At this stage, the hose must be connected to the radiator, while twisting the drain plug. However, first disconnect the container.
• Lower the car. Pour 2.5 liters of oil.
• Start and muffle the car about 3-4 times, in order to pump oil into the system. Due to this design, the oil is poured into the drain pan.
• Disconnect the hose.
• Put the outlet hose to the radiator.
• Connect a diagnostic tool to the connector , which will allow to add oil through the dipstick.
• Check how the oil change has passed in the automatic transmission (Toyota is a car or a different brand).

It should be noted that this process lasts about 1.5 hours. Some experts believe that it is not necessary to install a new filter and a pallet. The main thing is that these details are in good order. Otherwise, the oil change in the automatic transmission must take place together with the installation of a new filter and pallet laying.

Quite often the owners of foreign cars prefer to entrust this work to professionals. As a rule, this is due to lack of experience and knowledge. In addition, the procedure for changing the oil, both in the automatic transmission and in the transmission, in some cars refers to complex and time-consuming processes. Such a job can properly be performed only by qualified auto mechanics.