NanoStation M2: setup, manual, review, features and reviews

If we are talking about a classic router, then this is such a thing that can be found in any house where you use mobile gadgets or a computer. At home, you always have a stable Internet, fast and reliable enough. And what if it is a question of a village or a holiday village, where the network is always a problem? Here we need either a satellite or a gadget for transmitting a network signal over long distances, such as the NanoStation M2. With it, you can output the signal of your home Wi-Fi network over huge distances, thereby creating a unified network both at home and at the dacha. On this the possibilities of the device do not end, because it will be incredibly useful in the business environment and the protection sphere, but more about this in more detail - below. So, in this article, we'll look at the NanoStation M2. Customization, description of functions and user feedback are sure to interest you.

Equipment

There are no frills here. Everything is as ascetic and simple as possible. In addition to the router itself, you can find a cable to connect to the power and power. Power supply for the same purposes. Two short patch cords for connecting to a computer and a pair of tightening wires for fixing the device anywhere. This is all, no documentation, no additional software in the box.

Design and construction

Visually, the NanoStation M2 is very different from what is offered on the market. This is a small white box of elongated shape, created specifically for installation on the street, next to cameras and on all sorts of poles. This is facilitated by built-in fasteners, similar to clips. They are rather tight and strong. The main material of the case is a white matte plastic, resistant to damage and various weather conditions. The gadget looks pretty interesting and fits perfectly in any room and on the street. The router installed next to the cameras is barely visible. Most people will not even notice the device.

At the bottom of the case there is a cover, under which two ports for connecting RJ-45 cables (classic network cables) are hidden. There is also a small hole for resetting the NanoStation M2 settings (as well as on other routers). To fasten the gadget to large diameter masts, you must use the tightening wires that come with the kit. On the front panel, you can find a set of indicators that alert users to the presence of power, connect to LAN1, connect to LAN2, plus four more signal indicators showing the status of the connection (signal strength).

Characteristics

• Chip: Atheros MIPS, clock frequency: 400 MHz.
• RAM: 32 megabytes.
• Network interface: 2x10 / 100 BASE-TX and standard Ethernet interface.
• Channel width: up to 40 MHz.
• Operating range of the connection: frequencies 802.11 b / n / g are supported.
• The transmitter power in dBm is 26 ± 2.
• Bandwidth: up to 150 megabits per second.
• Works at temperatures from -30 to +80 degrees Celsius.
• Dimensions and weight: 294 x 80 x 30 millimeters, 400 grams.

Main Features of NanoStation M2

NanoStation M2 is a compact, but very powerful mobile transmitter with a MIMO antenna and a capacity of 600 milliwatts. The gadget is ideal for connecting to and receiving information from IP cameras. One of the main advantages of the gadget is the support of Airmax technology, which prevents unnecessary changes in the transmission of data over long distances. The NanoStation M2 has a built-in intelligent priority switching system for transmitting data from cameras or audio signals.

You can configure the NanoStation M2 access point to organize a large-scale Wi-Fi network (for example, in a small city) to which any clients can connect. The same access points are used to establish a connection between several branches of the same company.

Due to its ability to withstand severe climatic conditions, the NanoStation M2 has proven itself as an ideal tool for the organization of a reliable and uninterrupted network.

The same device can be used as a bridge, which will transmit the signal to a remote distance (up to 7 kilometers). This will be effective for individuals who want to establish a single network between two apartments in one city or a holiday home and an apartment. Also, the NanoStation M2 is used by communication providers who can install a single workstation in the house and from there conduct wires to each individual apartment. The main signal, respectively, is transmitted with the help of another mini-station NanoStation M2.

An important advantage of gadgets from Ubiquiti is the operating system Air OS, which helps to effectively manage several points of the NanoStation. In the same place, you can adjust the frequency shift so that owners of smartphones and computers with Wi-Fi support can not catch the signal transmitted by your bridge NanoStation.

Setting Up the Ubiquiti NanoStation M2 Loco

If you want to use the NanoStation as an add-on for your router, which will distribute the Internet to a large space using the same rules and security settings as your static router (or a modem with a router function), you need to configure the NanoStation M2 Router) in the access point mode:

• Before you start, you need to connect your main router to the computer with a cable (no Wi-Fi).
• Then open the "Control Panel".
• Go to the submenu "Network Management Center".
• Select "Change adapter parameters".
• Open the properties of the network connection and change the IPv4 settings.
• As the IP-address we enter 192.168.1.21, and as the subnet mask - 255.255.255.0.

Once you have finished setting up the connection, you need to configure the station itself:

• To do this, open any browser and go to the address 192.168.1.20 (if you can not enter, then someone has changed the address of the connection to the station).
• You will see a dialog box where you need to enter your login and password (by default it's ubnt).
• We open the Wireless tab in the AirOS interface.
• Change the Wireless Mode parameter to Access Point.
• In the Country Code parameter, enter any country (the US will allow you to overclock the connection speed).
• In the SSID field enter the name for the network (any).
• As a security type, we specify WPA2-AES and enter the eight-digit password.
• To save the entered parameters, press the Change button and restart the access point together with the router.

Configuring the Bridge in the NanoStation M2

Now let's talk about how to configure the NanoStation M2 in the subscriber point (bridge) mode:

• First, open the browser and go to the AirOS interface at 192.168.1.20.
• Go to the submenu Wireless.
• In the Wireless Mode item, in the drop-down menu, select the Station operation mode.
• Then you need to see the list of basic Wi-Fi stations and choose the one to which you plan to connect your NanoStation (put a checkmark next to the desired one and click Lock to AP).
• Save the settings by clicking the Change button.
• This completes the basic setup process and your bridge is ready for use.

Reviews

Proof of the fact that the gadget developed in Ubiquiti is really a chic option for networking is user feedback. If you look at the ratings on Yandex.Market, you can see that 90% of those who responded put an "5" rating, while the remaining 10% rated "4". No other router has ever received such flattering reviews.

The first thing NanoStation owners pay attention to is the long distance of the network. The speed is kept at a level of 100 megabits at a distance of up to 300 meters. Some users were able to set up a data connection for a distance of more than 20 kilometers. The speed of the connection is not affected by weather, pressure changes and natural disasters (even severe frosts do not disable the system). The antenna has very high power and a wide range of supported frequencies, which makes this gadget the most reliable in the class. Praise the unique capabilities of the device, such as frequency shift. What is important, many users have been working with the NanoStation for many years, which indicates its durability.

Of course, there were users who encountered problems while running the network. For example, insufficient power and loss of signal at a distance of more than a kilometer. First of all, this may be due to the fact that when setting up the access point, a country was selected with restrictions on the use of certain frequencies. Therefore, in order to achieve maximum efficiency, the country should be indicated by the United States. Also in the shortcomings recorded a complex configuration of the NanoStation Loco M2 access point. It's hard to argue, most buyers will have to re-read a lot of documentation to finally set everything up and bring it to working condition.

Price

Despite all its efficiency, high power and convenient settings, engineers from Ubiquiti were able to achieve the ideal balance between price and quality. Putting the quality in the priority, the developers did not forget about the availability. To date, the gadget is available at a price of 5900 rubles, which corresponds to the price of any other medium-sized router.

Instead of concluding

So, in the dry residue before us - an excellent and reliable device for organizing massive Internet networks. To date, there are not many similar devices on the market, so competition is tough. Ubiquiti could in fact prove that they make devices worthy of your attention.

Having familiarized yourself with this brief overview, you will be able to fully understand the positioning of the device and the functions of the NanoStation M2. Setting up the gadget, of course, requires some skill, but even with this you have to cope. You can only make a choice and decide whether you are willing to spend a decent amount for the organization of one network between the apartment and the cottage.

Owners and employees of large companies now know the most reliable way to provide the entire office with Internet, and security departments have found the ideal video stream transmitter from IP cameras without additional wires.