Metal block house: characteristics, photo, montage

The metal block house is made of galvanized metal sheets, which are coated with polymeric substances during production. Among the main advantages of this cladding can be identified strength, resistance to fading, environmental safety, no need for maintenance during operation, and resistance to mechanical stress. Block-house made of metal is absolutely not afraid of temperature changes, it is easy to install, in support of this, this material has gained such a high popularity in the construction goods market.

Characteristics

The metal block house has a rather impressive weight, it is used for exterior cladding. In the process of manufacturing the canvas, an offset pattern is obtained, which allows to achieve maximum similarity with natural wood. During the installation, it is necessary to use a locking joint, which ensures a reliable fastening. As a result, you can get a finish that has a natural look.

The metal block house can have a profile with two or only one wreath. A distinctive feature of this type of cladding is the maximum similarity with the rounded bar. On sale you can find this material, which has all kinds of shades, imitating different types of wood.

Additional features

The metal block house has a full panel width of 211 millimeters. As for the useful width of the canvas, it is 188 cm. The length of the finish can vary from 0.5 to 6 meters. If you decide to prefer a double panel, you should expect a full width equivalent to 390 millimeters. The useful width is 360 millimeters, while the length remains the same.

Installation of steel block house

If you decide to choose a metal block house as the finishing material for the facade, the photo of which is presented in the article, then there are several stages to be performed. The material is installed on a pre-arranged crate, as well as heat and vapor barrier. If you want to work with walls that were previously covered with plaster, then it is important to analyze the coverage for integrity and strength. In those places where the layers are poorly fortified, it is necessary to get rid of them. If there is a facade made of wood, it will be necessary to treat the surface of the walls with antifungal agents.

Installing the burr

The metal block house, the photo of which is presented in the article, is installed on the lath, which is made of metal profile or wooden bars. Siding can be arranged both vertically and horizontally. If the panels are supposed to be oriented horizontally, the components of the grid must be mounted vertically.

Installation of thermal insulation

The metal block house under the log is most often mounted in tandem with insulation material. In this case, in the cold season, the finish will keep the heat inside well. At a stage of installation of a heater it is necessary to use articulated dowels. If there is a need to use a heater in two layers, then it is necessary to ensure the dressing of the joints, so that gaps do not form.

Installation of panels and additional elements

Metal block house under the log, the installation of which you can carry out independently, should be strengthened using the building level. In the presence of a brick wall, the supporting brackets should be fixed using dowels. The fastener is installed at a distance of 35 millimeters from the spoon row. As for the bouncer, then it takes 60 millimeters to retreat from it.

With the help of screws on the brackets should install the L-shaped strips. The panels snap into place one after the other, and then fixed with screws, screws or nails. In this case, install the fastener in special holes. They are located at the top of the finish. Do not use a rigid mount when installing panels. They should be able to expand and contract when exposed to temperatures.

Features of work

Metal siding for the block house should be installed on the dumping system. If you decide to use wooden bars, then the cross section should be equal to 40 x 40 millimeters. In the presence of a metal profile, and also in case of its use for a frame, the dimensions of the distance between the elements should be within the range of 40 to 60 centimeters.

On the heater is installed windproof film, only after you can begin to sheathe facade siding. To begin these works follows from fixing the first bar. Panels are set by methods of moving from the bottom up. The resulting joints of the panels should be closed with a strip, whereas corner corners are fitted with corner strips, which can be external and internal.

The house has window and door openings, that is why it is necessary to prepare special decorative planks for framing the given components of the facade. The metal block house under the log, the photo of which is presented in the article, should be installed using a plumb bob.

Recommendations for installation of the system

If you decide to use the block-house metal under the tree, then for a successful result it is necessary to take care of the observance of the installation rules of the lath. Wooden beams should be installed taking into account the width of the insulation. If it is mineral wool, then it will be most convenient to work. This material is able to densely stand between neighboring racks.

In order not to measure each rake using a tape measure, which can take a lot of time, you should make a dimensional template using a bar. It should be applied to profiles in the future, which will increase the speed of installation work.

Before installing horizontal bars between them, the insulation should be laid and pressed with fungus-dowels. The film is stretched over the thermal insulation. It can be nailed with a stapler to a horizontal wooden grid.

Over the insulated and sealed with a facade of the facade, you can install a second vertical crate, which will be used to fix the metal siding. With vertically oriented panels, the installation must begin with the outermost rails. From the corner of the construction it is necessary to retreat 10 cm. This crate must be flat, among other things, be oriented at right angles to the horizon line.

Nuances of the installation

If you decide to choose a metal block house in the role of lining, the installation by yourself of this transaction can be easily done. After the end profiles are in place, you should proceed to the installation of the intermediate profiles. To do this, between the lower and upper ends, you must tighten the thread, which will serve as a guide for the other rails. In order to increase the step from the horizontal bar, you should apply any materials, but it will be best to use a beam of different thicknesses.

Conclusion

For the installation of metal siding, you can use a different technology for manufacturing the dredging system. This method involves the use of instructions for the arrangement of ventilated facades. Manipulation in this case will not significantly differ from those described above, however, it is necessary to use metal profiles. You can purchase a prefabricated subsystem of a ventilated facade, namely brackets and profiles. As an alternative solution, a CD profile can be used, which can be installed on perforated U-shaped hangers. Before choosing a crate, you should seriously think about the material. For example, wood serves much less, but it is easier to install such a system.