Marble plaster: description and benefits

Collections of modern finishing coatings regularly surprise the consumer with new textures and textures. Manufacturers of materials for wall and floor laying have long brought the main natural patterns and patterns to their model families and successfully develop them. In the line of wallpaper, laminates, fabric coverings, you can find an imitation of wood, leather, metal and even glass. However, modern technologies allow styling not only the appearance, but also the structure of the material. This effect is provided by marble plaster, the photo of which is presented below.

What is a marble coating?

In the manufacture of such plaster marble chips and stone dust are used. Thus, not only the surface of a natural mineral is recreated, but also its internal content to some extent - of course, in a mixture with other components. So, for the ligament, developers use an aqueous emulsion based on acrylic copolymers. Other additives are also introduced, including water-repellent additives, preservatives and solvents. The result is plaster with marble chips, which can simulate the characteristics of this stone. True, do not think that in each version of the composition involved pure marble.

Sometimes manufacturers use mixed compositions, in which granite particles are also used. This does not mean that the quality of this material loses from the point of view of the operational effect - just on the output the coating acquires a different set of technical and physical properties. For example, marble chips have high qualities of adhesion, but its strength leaves much to be desired. For its part, the granite filler performs a strengthening function, due to which the marble plaster acquires worthy indicators of mechanical durability. However, the strengthening of these or other qualities can be achieved and due to other synthetic additives.

Advantages of marble plaster

As you can see, the marble covering not only provides an external resemblance to the natural stone, but also partly repeats its structure. In no small measure, this determines the merits of the material. The use of this finish inside the house ensures the ecological cleanliness of the premises. Against the background of the spread of artificial coatings, this quality is particularly appreciated. Also, marble plaster differs vapor permeability, due to which the surfaces processed by it "breathe". This quality improves the microclimate in the room and has a useful preventive effect in terms of improving the local biological environment. For interior decoration in residential areas, mechanical resistance is not a fundamentally important quality, but it should be noted that it is characteristic for almost all marble coatings.

Where it is appropriate to use marble plaster?

Use the coating can be when finishing any surface, where it will be beneficial to look a specific texture of marble. Usually this way internal interiors are made out, but the external surfaces are no exception. The fact is that the presence of plasticizers and moisture-resistant additives in the mass of plaster makes the final coating virtually invulnerable to the effects of atmospheric precipitation. Moreover, in some modifications, decorative marble plaster is positioned as frost-resistant. This means that the composition can be used to decorate the facade in cold regions. On the other hand, the coating is not afraid of ultraviolet radiation and exposure to high temperatures, which makes it possible to use it as a universal lining.

Preparation of walls for finishing

Maximize the positive qualities of this material is possible only if the installation is properly done, which starts with the preparation of the rough surface. At this stage, it is necessary to carry out two tasks - to remove the work area from obvious defects and to form a basic basis on which the material will later lay down. To marble plaster evenly and without defects covered the surface, it is necessary to treat the wall with putty and a primer with a deep penetration. Further, using a conventional roller, a base substrate is formed on a mineral base with a quartz filler. The task of this layer is to ensure sufficient adhesion of the plaster to the surface. Now you can proceed to the direct laying of the marble cover.

Technique of application

The method of laying the marble coating is in many respects similar to the traditional method of applying plaster. The mixture is formed in a container with water in such a way that the result is a creamy mass. Then, using a trowel and a spatula, the solution is applied to the work surface. External polymerization of the mixture occurs within 20-30 minutes, so the procedure should be performed without delay. It is recommended to immediately prepare the solution in an amount sufficient to completely cover the target area.

The technique on which the façade marble plaster fits is somewhat different. The application of the composition in this case may require the inclusion of reinforcing materials in the structure. For this purpose, composite and fiberglass thin meshes are used, which increase the strength properties of the coating. Drying of the plaster is fast enough - usually after 2-3 days the surface is ready for full operation.

Manufacturers of marble plasters

For the first time plaster of this type on the market was presented by the company "Bayramiks". To this day, this manufacturer is the legislator of technological fashion in this segment, producing a variety of texture and texture coatings. The competition to this brand is the company "Bolars", which fully mastered the technique of manufacturing the material and successfully experimented with its compounds. There are no special differences in the approaches of these companies to the formation of model lines, but the marble plaster "Bayramiks" is considered to be more qualitative and durable. In the assortment of the company you can find both compounds for interior decoration, and modifications for outdoor applications.

Reviews about marble finish

Users appreciate the decorative properties of the coating. Many types of facing are famous for their resistance to mechanical influences, but it's not so easy to develop a truly original texture today. Just because of the aesthetic qualities and stands out against the general background of marble plaster. The reviews note that it reproduces the picture of natural stone almost in details. Of course, we can note the competition in stylistic virtues between the stone itself and the plaster, but on other indicators the advantage will be on the side of the artificial composition. Users emphasize the convenience in its application. Not the last place among the selection criteria is the price accessibility coupled with the environmental safety of this material.

Conclusion

Imitation of natural stone is considered one of the most complex techniques. The fact is that the exploitation of many coatings under the influence of cold, humidity and sunlight is accompanied by a distortion of the texture, as a result of which the effect of recreating the natural material also disappears. In this respect, marble plaster is one of the most reliable coatings. Synthetic additives, which manufacturers make in the composition of such mixtures, give the coating a wide range of protective properties. So, for facade compounds, the introduction of frost and waterproof additives is mandatory, and for materials intended for interior finishing, antibacterial and anti-allergenic inclusions are developed.