Best Adhesive for Skin

Leather things are very attractive in appearance, durable, practical. However, they have one significant drawback. Over time, they lose their original gloss. On the surface there are cuts, cracks, scrapes, scratches, the color fades. Many are sorry to part with loved things. But nobody wants to look untidy. In many cases, glue for the skin will help to correct the situation. Repair of things can be fully implemented independently. With the help of special compounds, you can not only eliminate cuts, but also mask attrition and other defects. Next, consider which glue to use for the skin in those or other cases.

General information

And on a production scale, and at home, it often becomes necessary to use glue for the skin. Repair of parts is carried out by various compositions: perchlorovinyl, rubber, polyurethane and others. Some elements of the artificial material (substitute) are restored using polyvinyl acetal mixtures and polyamides. Today, the choice in stores is quite wide. In addition, glue for the skin can be made and yourself.

Features of formulations

Due to a wide range of consumers, the question often arises as to whether there is a better glue for the skin. Specialists in this case do not give an unambiguous answer. Choosing which glue to use for the skin, you need to know the features of the material itself and the performance properties of a particular composition. However, there are a number of characteristics that any mixture used in the work must possess. Adhesive for skin should possess:

• Good viscosity.
• Elasticity.
• Resistant to fats, oils and water.
• Heat resistance.

The most popular formulations

Not all masters prefer to use special glue for the skin. Some use the universal composition "Moment". It's quite popular glue. For gluing the skin, rubber compounds are also used. Often in the work, mixtures for shoe restoration are used. Some masters use special adhesive tapes. They are sticky on both sides. With ribbons it is convenient enough to work, especially when you need to replace the zipper or glue the seam allowances. Very popular and PVA glue. After it dries, a smooth transparent film is formed, resistant to ultraviolet, fat and oil. It is not subject to mechanical damage. PVA is used as an adhesive for skin and tissue. After applying the composition (with careful work), there are no traces left on things. It is also often used as a nitrite adhesive for the skin. It looks like honey in its consistency. It is liquid, transparent with a yellowish brown tinge. With its help, the restoration of leather goods (belts and other) is carried out. This composition is distinguished by a good graspability. On the tank there is an instruction. Bonding can be done in a hot and cold way. "Dysmokol" is a liquid crystal-clear composition. This skin glue is used to mask cuts on the elements. Also with its help fix small details. This glue for gluing the skin is also used in two ways. Can be fixed hot and cold method.

Rubber glue is considered to be unreliable . For leather products, it can be used for auxiliary or temporary operations. For example, when basting, performing applications, flashing, bending and other manipulations. The rubber glue has a liquid consistency, it is cloudy, pale yellow in color.

Celluloid composition

Many consumers are interested in which glue for the skin has a high grasping ability. In this case it is worth mentioning the celluloid composition. It is used in working with different materials. In particular, this glue is used for wood and leather, plastic, textiles and other. The composition dries quickly enough, it is resistant to moisture. You can make it yourself. For this you need to take the old film. In hot water, it should be washed off the emulsion, and then cut into small pieces. They should be placed in a glass container and pour acetone or pear essence (amyl acetate). The proportions are as follows: 1 part of celluloid per 2-3 parts of the solvent. The container should be shaken periodically. After the film has completely dissolved, the adhesive is ready for use.

Mixture of flour

This is a fairly simple recipe from the available components. To prepare the glue you need flour (wheat) - 10 parts, 0.2 parts of alum and water - 410 parts. First, a gruel is made. Wheat flour is kneaded in cold water. Kashitsa should be without lumps. The remaining water is heated to a boil. In it you need to dissolve the alum. In them add the prepared mush, mix and boil. As a result, a translucent mass should be obtained.

Composition for restoration in the car

Many owners of personal transport periodically change the color of leather upholstery in the cabin. This procedure is called a constriction. In the process, when using adhesive compounds on the seats, the skin of the desired color is stuck. In this case, you can use the "Moment" mentioned above. Also glue "88" is popular . But it has a fairly persistent unpleasant odor. However, fixation itself is very reliable.

Glue Mah

This compound very firmly adheres to the plastic. The glue is toxic and flammable, so care must be taken when working. Use the compound in a well-ventilated area. Open tube should be used within six months. Then the glue will begin to separate. Directly before use, the formulation is thoroughly mixed. Restored surfaces are degreased, sanded, covered with a primer. The adhesive is applied to a dry surface with a special brush. Her hairs should not remain on the surface. To speed drying, you can use an industrial hair dryer. To protect hands in the process of using paste IER-1. The glue drying time is 3 hours. After the end of work, the hands should be washed with soap and apply a fat cream on them.

Sprays

Adhesives-aerosols are very convenient to use. They are often used to fix soft and flexible materials. They include, in particular, not only the skin, but also linoleum, foam rubber, mineral wool, carpet. Modern sprays can be applied on a concrete base, uneven surfaces. They do not require a long fixation.

Liquid skin

To work with this composition does not require any special skills. Working with liquid skin is comfortable - during the first 20 minutes it does not polymerize, which allows you to correct possible errors in work. During this time, the composition can be washed off with soapy water. Restored with a liquid skin area will have excellent elasticity and high strength. The composition is used on surfaces that are subjected to strong tension. This, in particular, seating seats, sofas, shoes, some details of clothing. The composition uses a high quality pigment. Due to it, an opaque color is created even when a very thin layer is applied. The product on which the liquid skin is applied becomes resistant to moisture.

How to clean the surface?

In some cases, it is necessary to remove the glue from the leather product. There are several ways to do this. You can, for example, use liquid to eliminate varnish. The treated area is wetted with solvent and left for an hour. After this time, the area is wiped with a soft brush. In some cases, the procedure must be repeated many times. Sometimes to clean the surface using a lump or liquid soap or greasy cream. To remove superglue, you need to use "Dimexide". It is on sale in a pharmacy. Cotton swab is wetted in solution and treated with a contaminated area. Also, heating or freezing the area can be used to remove the superglue. Under the influence of high or low temperature the composition becomes brittle. In this case, it can be scraped off with pumice stone or a nail file. Also in stores is sold and a special "remover" for glue. With the help of a quality composition, even old pollution can be removed. In this case, the surface itself retains its integrity. You can clean your hands of the "remover" in just a few minutes.

Finally

As you can see, the choice of compounds is quite wide. What kind of glue for the skin to use will depend on the characteristics of the material and the final purpose of the work. In any case, before you begin, you should read the instructions on the package. If the glue is toxic, precautions should be followed.