Instructions and characteristics of the Taiga chainsaw

To cut firewood on an industrial or household scale, consumers are trying today with chainsaws, which can be considered modern and highly efficient equipment. Buying such a device, you need to pay attention to the features, specifications, as well as the manufacturer.

Chainsaws "Taiga" today are not so common, but you can consider as an option these units, which will be discussed below. Like the chainsaws of other companies, the above mentioned are divided into:

• Professional;
• Semi-professional;
• Household.

The latter are used in country houses. Work with them can be up to 40 minutes a day, this indicates that the resource is rather small. But such equipment is easily manageable and does not cause strong vibrations. Chainsaws "Taiga" are able to work and up to 8 hours a day, in this case we are talking about semi-professional models that are used for sawing wood, as well as cutting small trees. With the help of professional models you can work twice as long, the conditions can be the heaviest.

The advantage of these devices is the relatively low cost, and the units for the severe Russian climate have been developed. The ratio of power and weight is the main factor in choosing a chainsaw . With the increase of the first parameter, the weight will increase, which entails an increased complexity in the work. Therefore, before buying the equipment should choose the best option for yourself.

Characteristics of the brand 245 petrol saw from the manufacturer "Taiga"

Considering the "Taiga" chainsaws, we should pay attention to the "245" model, which is a semi-professional equipment with a high weight of 8.95 kg. The tire has a length of 40 cm, which is quite enough for sawing 30-cm logs. The device operates due to a two-stroke engine, the power of which is 2.6 kW, or 3.5 liters. from.

You might also be interested in the step of the chain, which equals 9.3 mm for this equipment. In the fuel tank, you can pour gasoline, the volume of which will be a limit of 0.7 to 0.8 liters. Such chainsaws "Taiga" can easily cope with the preparation of firewood, pruning of twigs, and also the felling of small trees.

User's manual

Chain saw "Taiga", the characteristics of which were presented above, is equipment that should only be used for its intended purpose. Before starting work, it is necessary to remove lubricant from external surfaces, parts and assembly units. Use for this purpose rags soaked in gasoline. The candle is also washed in gasoline, and then dried and wrapped in the hole of the cylinder.

Discarding chainsaw in the cold season should be carried out in a room where the temperature varies from +15 to +20 ° C. If the temperature falls below the recommended values, the preservative grease will thicken, and the work will be difficult.

"Taiga" - a chainsaw, which should be operated with security measures taken into account. They say that maintenance should be carried out only in a specially adapted place, it can be a well-equipped workshop. In order to reduce the impact of vibration, the total running time should not exceed 208 minutes. To refuel chainsaws and rest, it is necessary to regularly stop the equipment.

Technical characteristics of the 213 brand saw from the manufacturer "Taiga"

The given tool on characteristics almost does not differ from the model described above. The power remains at the same level, and the weight is 8.8 kg. The chain pitch is 9.3 mm, and the fuel tank is calculated all for the same volume. The tool has a 38-cm working machine, and the equipment can be used for domestic purposes or in construction conditions.

Technical characteristics of the tool TBP-4000

After you become acquainted with the features of some models, you may also be interested in the products of the company "Taiga". The chainsaw of the above brand have a higher capacity, which is 5 liters. With., Or 4 kW, while the weight is only 5.5 kg. Such an advantageous combination of weight and power allows the operator to easily perform complex tasks when sawing wood and cutting wood.

In the fuel tank you can pour 0,55 liters of gasoline. The device can be manually started, it has a 45-cm bus, and the chain pitch is 0.325 inches. The manufacturer took care of its customers and provided the device with an anti-vibration system that simplifies operation. Among other things, the unit is protected against recoil, which minimizes the possibility of injury.

User's manual

The manual of the Taiga chainsaw also contains information on how to start and stop the engine. To do this, the instrument should be given a stable position, and after reinstalling the gasket with a special button in the center position. The cold start lever extends to the operator to the point of failure, after the ignition switch is set to the "Off" position.

While holding the instrument with your left hand on the handle, with the toe of your right foot you should step on the side of the rear handle. The operator's right hand should be pulled by the starter handle until it engages with the flywheel. Then the cord is pulled out sharply. This operation must be repeated until the first flash occurs in the engine cylinder.

Cost of spare parts

If you buy a Taiga chain saw, spare parts for it may be needed during operation. For example, the shock absorber steering will cost in 196 rubles., While the drum starter costs only 80 rubles. The additional shaft has a price of 134 rubles. But the silencer costs 224 rubles. Electronic ignition you can buy for 548 rubles., The lock of a piston finger - for 200 rubles.

Conclusion

On sale, you can also find a model "52ss", which is semi-professional equipment and has advantages over the above models. The power is 2.8 kW, but the weight is much smaller, it is 5.5 kg. This indicates that the technique will be much easier to operate. Before choosing, you must decide what load will be provided on the equipment, only so you will not overpay for professional equipment, the weight of which is quite impressive.