Aspiration installation "Folter". Features of the aspiration system

Filtration systems, air washers and other climate equipment with varying degrees of efficiency allows you to clean the premises of pollution. Especially for objects whose work is associated with the intensive release of harmful particles into the air, aspiration systems are designed. This technique is oriented towards a thorough and comprehensive preparation of the air environment for safe use. A successful example of the implementation of this concept is demonstrated by the aspiration units "Folter", presented in the market in different variations.

General information about the "Folter" systems

Enterprise "Folter" since 1995 specializes in the production of filtration plants of different classes and purposes. To date, the company's assortment includes dust collectors, air filters, as well as specialized solutions for production and administrative facilities. A special place in the line is occupied by complex units "Folter". The aspiration system, the photo of which is presented below, for example, is a pocket pocket filter. This is a highly effective solution for small and medium-sized industries, which will allow to maintain the optimal microclimate in a constant mode.

It is also important to note the flexibility of operation of this brand. First, it is the ability to design multi-component structures specifically for the specific needs of the existing ventilation or climate infrastructure. Secondly, the aspiration system "Folter" itself can be formed like a designer from components of different types. As the prefabricated elements, the manufacturer offers filtration sections, cartridge membranes, electrostatic precipitators, etc. Separate attention should be paid to the membrane of filtering devices. The hull can act both sleeve and cartridge designs of different sizes.

Features of the installation of "Folter"

The manufacturer recommends the aspiration system to be initially considered as part of a ventilation system. In this case aspiration performs the function of drawing, removing the polluted air. One of the key features of the "Folter" devices is dot work with a specific technological site. This means that to remove the polluted air from the production furnace, you do not need to process the entire space in the room, but just send the workpiece to a specific area. But this is only the first stage of air treatment. Further, dust collectors come into the business, which are also part of the aspiration and, respectively, ventilation system. At this stage, the features of the "Folter" aspiration system are determined by the filter-ventilation function of the unit. The system simultaneously removes the old and cleans new air, thus implementing the recycling procedure in accordance with the requirements of sanitary norms.

Modifications of aspiration units

There are several versions of the dust collector, which performs the most important task of air purification. For large enterprises, the "Cyclone" system is designed for rough cleaning. This complex realizes the first stage of air preparation before more delicate treatment by other dust collectors. For high-efficiency cleaning of air streams inside the aspiration complex the bagging system FRIP is designed. Its features include the possibility of processing without the need to remove warm masses. This solution is effective in winter, because it eliminates the need for additional heating of the newly arrived cold air. Equipped with aspiration units Folter and filter-ventilation chambers KFV-O. This is an optimized multifunctional equipment that implements the tasks of removing contaminants, cleaning and fine filtration of the air environment.

Structural designs

Developers "Folter" offer two basic form factor of aspiration units - modular and monoblock. In the first case, the unit is assembled from separate functional elements, as already mentioned above. As a rule, the basic composition of such a system includes separators, filters, fans and communication pipes. Advantages of modular aspirators include wide possibilities of installation - in fact, each unit is designed purposefully not just for a specific enterprise, but for the requirements of the site of operation. Monoblock aspiration units "Folter" are ready-made units that do not involve structural changes. Unless during maintenance personnel can make adjustments to the technical unit of the unit. This solution has advantages in the form of mobility and a more affordable price.

Applicable filters

The most promising direction is the HEPA air filter system . These are high-performance modules that realize multistage dense cleaning of air masses. A new generation of membrane filters, ULPA, is also used. The features of this system include the possibility of operation in clean industrial premises. That is, the device provides cleaning indicators corresponding to living quarters, but in production conditions. Equipped with such components aspiration units "Folter" not only provide removal of dirty particles, but also produce radioactive aerosols with finely dispersed microorganisms.

Applications

In one form or another aspiration units are required in any industrial enterprise. Especially if it is a question of metallurgy, chemical manufacture or mining branch where there are harmful emissions. To work in such conditions requires a powerful and productive system. Aspiration units "Folter" from the family "Cyclone" successfully cope with similar problems of intensive cleaning. Modifications for fine air preparation are more often used in servicing administrative and commercial buildings. They realize a multifunctional cleaning with an emphasis and an antibacterial effect, in which just the above HEPA filters help.

Installation of aspiration system "Folter"

The method of installation depends on the selected system. Modular complexes are integrated into the infrastructure of the enterprise as part of construction activities. For example, to create a base for a massive installation, a foundation of a foundation is often required. Compact filtration units are usually built into ready-made mines and ducts of ventilation systems. Fastening is realized by means of mounting hardware - the main thing is to correctly calculate the sizes of functional parts in advance. In some versions, the aspiration system "Folter" does not require installation. These are individual modifications of the monoblock type. They are located on a movable platform and allow free movement from one source of harmful emissions within the shop to another.

Conclusion

World tendencies in the design of aspirating plants are increasingly oriented towards fundamentally new technological solutions. Mostly they give a new level of functionality and management convenience. Against this background, the Fowler stationary aspiration system may seem old-fashioned, since the main emphasis in the development of most of its models is on mechanics and structural improvement. In practice, this approach provides both pluses and minuses. The disadvantages are that the installations are inferior to foreign competitors in terms of ergonomics. However, advantages in the form of increased energy saving, reliability and production efficiency justify this direction of development of aspiration systems. In any case, this is evidenced by users of this product at large industrial enterprises.