Technologies, Electronics
The TV does not turn on: causes and repairs
Like any other technology, TVs can fail and suddenly fail. At the same time, these failures manifest themselves irrespective of the lifetime of the device. For example, sometimes the TV does not turn on. When trying to turn it on again, various indicators blink and also click the relay. There may be other "symptoms". Let's look at why TVs refuse to work and what to do in this situation.
Common causes of malfunctions
This problem can occur for a variety of reasons. It happens that the LED indicators flash as usual, but the TV still does not want to start. Also, the indicator lights red, but the device can not be controlled from the remote and does not turn on.
Indicators flash
If they blink on the case, then the device independently conducts diagnostics and will soon find out the cause of the problem. Often on different models, you can observe that the lamp or LED flashes a number of times. So he reports a specific error. Some of the codes to them can be found in the instruction manual. In TV of manufacturers such as Sony, Philips, Panasonic, and others, there is a self-diagnostic function. The central processor on the data buses receives information from the main devices and units. If a faulty node is detected, the processor will block the activation command. Therefore, if the Philips TV does not turn on, but the indicator flashes, you must read the error and decode it. Then you can try to fix the problem. Also a similar symptom is manifested when the TV panel acts as a computer monitor. If the PC went into sleep mode or turned off, then the LCD panel flashes several times when the power button on the remote control is pressed.
Indicators are always lit
A luminous diode informs the user that the power supply of the device normally receives the supply voltages. What if the TV does not turn on and does not respond to signals from the control panel? The first is to try to turn it on using the buttons on the TV itself. Probably, the malfunction is caused by an incorrect work of the panel or any errors connected with it. But certainly not here is not the fault of the TV itself.
Protection
This is one possible reason. The TV in this case can make attempts to start, but after a few seconds the screen goes out or completely stops responding to all attempts to start it. The main and popular reason for this problem is a failure in the supply of electricity to the home network. The power system in modern TVs likes stable and high-quality voltage. The most effective way to solve this problem is to completely disconnect the device. This can be done by pulling the plug out of the socket. After a while the device will be restored. If there are constant problems with voltages, then the best solution is to turn on the TV via stabilizers, uninterruptible power supplies or at least through standard network filters. But best of all, if you want to avoid such problems, turn off the panel when you leave the house. Then you will not be wondering why the TV does not turn on.
Faults in the processor
Modern TV panels are equipped with a huge number of control electronics. Schematically they are small PCs with a separate CPU that manages all the important processors.
TV does not turn on, the indicators do not light
These symptoms are directly or indirectly related to the lack of electrical power. If the lamp just burned out, then the device would function in the normal mode (no indication). If this happens, then do not panic. First, you need to exclude all possible malfunctions, which are corrected by yourself. But there are situations and more complicated. For example, the LG TV does not turn on, and the problem lies in the breakage of the fuse resistor.
No voltage in the outlet
Sometimes automatic switches in the switchboards are switched off imperceptibly. Malfunctions occur in the outlet itself. This is diagnosed using an indicator or a multimeter. If there is no power, check the machine. If it does not help, change the outlet.
Extension cord defective
This is a common reason why the TV does not turn on.
Invalid mode selection
It often happens that a person accidentally or intentionally chooses inappropriate modes of the device. In this case, the TV can turn off and not turn on or go into sleep mode. In this case, reset the settings to factory settings.
Malfunctions of electronic components
As already noted above, if Philips TV does not turn on, this is due to the failed electronic components. For example, for some reason, resistors or capacitors burned. The actual problem is fuses.
Conclusion
If the Samsung TV does not turn on (and this applies to any brands), this does not mean that it is broken irrevocably. It can be revived in simple ways. But if the problem is in capacitors or a resistor, without proper experience it is not necessary to take up repairs.
Similar articles
Trending Now