Installation of a hygienic shower. Built-in hygienic shower. Hygienic shower with thermostat

About such plumbing equipment as a hygienic shower, while very few people know - much more popular bidet. But this device has one serious disadvantage. This is the overall dimensions. Installation bidet is possible only in fairly large bathrooms. Installation of a hygienic shower is also possible in small rooms. Even more - this equipment is mounted directly next to the toilet. There are models that can be built into the toilet. Thus, it easily turns into a full-fledged complex for hygienic procedures.

Let's get acquainted with these devices in more detail. Today we learn what kinds they are, we will study the features of installation, as well as the products of different brands.

Pluses of installation of hygienic showers in bathrooms

Water procedures are an important part of hygiene procedures. This includes a visit to the toilet. That is why in expensive hotels for five stars it is difficult to find a toilet in which there would not be a bidet.

It should be noted that the bidet is the best of what is, for personal hygiene. However, it is impossible to install it near the toilet in a typical toilet of a residential building because of its dimensions. Therefore, for fans of water procedures, the installation of a hygienic shower will help to solve this problem. In bathrooms with a bath and a toilet, at first glance, there is no need for a bidet, as the shower or bath is practically next to the toilet. But thanks to the hygienic, the soul does not have to go through the bathroom once more. If the toilet is separate and there are few places in it (as it was in Soviet multi-storey houses), then installing a hygienic shower is what needs to be done first.

This equipment saves space. It also significantly saves time for the implementation of procedures. A hygienic shower allows you to save money seriously. The cost of these solutions is much lower than even the most affordable bidet.

The shower makes it easier to clean the bathroom - with it you can very quickly clean the cat tray or baby pots. For mothers with young children, the installation of a hygiene shower also helps to solve a lot of problems - the child care is greatly simplified. It will also be easier to conduct water procedures for older people or with disabilities.

With some models of showers, even the need to use toilet paper is no longer necessary. Plumbing equipment can partially fulfill the function of a bidet.

Features of mixers

Structurally, the mixer with hygienic shower is no different from the traditional one. The exception is the hose and watering can. The latter is fixed on the wall or toilet bowl - this makes it possible to conduct water procedures more comfortably. It should be noted that the mixer can also be used separately from the shower. Water enters the shower only when the button is pressed on the watering can.

Classification

This equipment is divided into types according to operating characteristics:

• Bidet toilet.
• Cover-bidet.
• Wall hygienic shower.
• Souls with thermostat and sink.

All of them have their own peculiarities and differences. Below we will look at each type in more detail.

Bidet WC

This device implies the presence of a built-in nozzle on the toilet. It should be on the body of the device, or on a special retractable nipple. In order to ensure the supply of water, you need to mount a separate hose, as well as a mixer. It can be purchased either separately or as a complete hygiene shower.

Cover-bidet

This construction is the lid of the toilet, which has a built-in shower. Among the advantages are high mobility. The system is suitable for all types and types of toilet bowls. Such a built-in hygienic shower in the lid can be taken with you when moving to a new dwelling. Usually the bidet cover has an electric drive, which is very convenient for operation.

Similar manufacturers can equip with additional options - for example, a hair dryer, water heating.

Wall hygienic shower

To arrange this system, you should first purchase and install a special type of mixer, where there is no spout. In addition, from the usual this solution is distinguished by the presence of a shower head with a special shut-off valve. The size of the watering can is much less than the usual shower.

When installing, you should consider the necessity of supplying both cold water and hot water. When installing on an already installed toilet it is better to use a tee, in which there is an outlet to the cold water pipe, to the soul and immediately to the toilet.

It is often possible to meet a hygienic shower with a thermostat and a heater for wall mounting. Due to the presence of a thermostat, it is enough to adjust the water temperature once and then never to adjust. A set of such equipment includes a wall holder. It is hung at a short distance from the mixer for easy operation.

There are two types of such devices. This is an open design and hidden. In the case of an open shower, the mixer is located on the wall. A hose with a shower-watering can be connected to it. Between the watering can and the hose-mixer are seals in the form of gaskets.

The installation of a hidden shower involves a partial analysis of the wall. This is necessary in order to bring water to the device. Usually it is necessary to pierce a niche in the wall. In the case of choosing this particular design, it is necessary to install a special type of mixer - hot and cold water is connected to it. Then the niche is trimmed and decorated. The lever to control the hidden hygienic shower is drawn into the hole, and then a hose and a watering can be connected to it.

The testimonies of many people indicate that the hidden version is very convenient to use and does not worsen the overall interior design. But such a system is better to install during repairs. Nobody will want to wall the wall with the existing finish in the toilet. Especially if you used expensive tiles with a unique pattern.

Souls with thermostat

We have already partially considered hygienic showers with a thermostat. But such an element can be installed not only on the wall, but also on other types of devices. The element is integrated directly into the watering can. Such a shower can be completed with a hose and holder, as well as a special mixer.

Shower with sink

This design is installed on large areas. This is a separate sink, which is already equipped with a mixer for a hygienic shower. The latter is already equipped with a watering can and an appropriate hose. Minus this design in the incomplete shutdown of the shut-off valve. When the shower is finished, it is necessary to cut off the water supply on the mixer. If the equipment is equipped with a spout, then it will be impossible to forget about the need to shut off the water. When the liquid is fed, it will flow into the sink.

Plus this system in an additional washbasin, where you can wash your hands after the process directly in the toilet.

Features of the installation

The installation process and its features depend on the specific type of equipment. For installation of some types, major repair work may be required (for example, if we consider a hidden shower). Other designs are easily installed without the need to make niches in the walls and somehow change the wiring in the water pipe.

Toilet bowl installation

This construction is mounted in the same way as a standard toilet. But it is necessary to perform additional water supply and install a mixer. The connection process can be performed in three ways:

• The first method involves joining the cold pipe first to the ball valve, and then to a sufficiently flexible hose.
• The second method requires the installation of two pipes to a concealed mixer. In this case, hot water will flow from the nozzle.
• The third option - connect the two pipes directly to the thermostat and already on it adjust the water of the desired temperature.

These structures can be floor-standing, and there can be no differences from a traditional toilet bowl. Also, there are suspended structures.

Installation of a bidet cover

Let's look at how the built-in hygienic shower is installed. To modernize the toilet bowl with the help of such a device, first shut the shut-off valve, thereby blocking the flow of water into the tank. With the latter, it is recommended to drain all liquid. Next, remove the water supply hose in the toilet bowl. Then remove the old cover and install a hose that will connect the tee to the tank. Then insert the bolt into a special plug, and then into the plate. Then it all connects to the main part of the system. The main part is installed in place, and the bolts are mounted in the hole on the toilet and screwed. It only remains to connect the system to the already connected tee and to check how the water is supplied. When installing, it is important to ensure the tightness of all connections. However, do not over tighten the nuts. For additional compaction, experts recommend using a tape-tape.

Wall installation

Installation of the hygienic shower wall type is done by own hands. However, you should fully comply with the recommendations, which the manufacturer has detailed in the instructions. For installation work, there is no need to use special tools. As for the configuration of the device, depending on the model, it includes a watering can, a hose, a mounting plate, a rack holder and instructions for installation.

If the equipment is to be mounted on pipes, then a hygienic shower mixer with one or a hose outlet is suitable. At one end, the hose is connected to the mixer, the second is attached to the watering can. Then the latter is inserted into the wall holder. In order to operate the shower for as long as possible, do not forget to shut off the water after each use. If you ignore this step, then the hose and the check valve located in the watering can be permanently under pressure. Soon they will not stand work in such conditions and are deformed.

If there is a certainty that the water will constantly overlap, do not install the lock button. However, in this case, all operations have to be done manually on the mixer, and this is not too convenient. But this approach will eliminate the risk of leaks. To make a wall-mounted shower, manufacturers use stainless steel alloys that have been previously processed. The watering can is made of plastic with a thin chrome sputtering. But there are also metal products. The watering can consists of rubber nozzles. They are needed to create a directional jet, as well as to protect from splashing. The hose is most often made of plastic, and for protection against kinks it can have metal inserts.

Mounting the structure with a sink

The installation process is no different from installing the sink. But the mixer must have a spout and an outlet under the shower. If the washbasin is already installed, then it is very easy to replace the mixer. In small spaces, the sink is placed above the toilet bowl. Often, these structures are installed in the corners.

The design of the mixer is a lever, a spout, and an additional outlet for hose connection. The principle of operation is very simple. When the faucet opens, the water moves through the spout to the top of the sink. If you press the shower handle, the liquid will flow into the toilet bowl.

Browse popular models

Among consumers, Hansgrohe hygiene showers are especially popular. Also, such manufacturers as Grohe, Ideal Standart have a good reputation. As for the cost of kits, the price varies from 5 to 14 thousand rubles.

Among the range of Hansgrohe hygiene showers is a large selection of models for concealed installation, wall-mounted models. It is a reliable manufacturer that produces quality sanitary ware. Millions of people use this company's mixers. Reviews of this German plumbing are only positive. If you need more budget solutions, then you can pay attention to the products SmartSant, Vidima, Lemark, Bravat. The cost of kits starts from 2.5 thousand rubles. These are less productive options, but they are not inferior in quality to Hansgroe.

Conclusion

Hygienic shower is considered a relatively young equipment among other generations of sanitary devices. But despite little popularity, it is gaining popularity among consumers. This equipment is simple and convenient to operate. These devices will be an excellent addition to the bathroom in any style.